|
| 1 | Earth work in excavation of foundations of bridges culverts, buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around (b) For semi-conglomerate soil of the nature of pick jumper work.(As per CSR-2020 item No.6.7(b) |
| 2 | Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type.(As per CSR-2020 item No.10.8(b)-ii) |
| 3 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.(As per CSR-2020 item No.10.20) |
| 4 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete(As per CSR-2020 item No.18.19) |
| 5 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.(As per CSR-2020 item No.9.1) |
| 6 | Centering and shuttering for columns (Square or rectangular or polygonal in plain).(As per CSR-2020 item No.9.4) |
| 7 | Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.(As per CSR-2020 item No.9.8) |
| 8 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.(As per CSR-2020 item No.11.6) |
| 9 | 12.5 mm thick cement plaster 1:4.(As per CSR-2020 item No.15.9) |
| 10 | Providing and laying Anti-skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.(As per CSR-2020 item No.14.72) |
| 11 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/ Highly Gloss finish/Highlighter/emboss conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(As per CSR-2020 item No.14.127) |
| 12 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)(As per CSR-2020 item No.16.63) |
| 13 | Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position including the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete (c) Doors and windows frame of size 151mm 60mm with 35 mm wide double rebate weighing 3.95 kg per meter.(As per CSR-2020 item No.18.4-c) |
| 14 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete field in position. A) panelled, glazed or glazed and panelled. (ii)35 mm thick.(As per CSR-2020 item No.17.10-(XVII)-a-ii)) |
| 15 | (ii)Wire gauge Hollock wood door shutter without springs housed in chowkhat. (a)35mm thick(As per CSR-2020 item No.17.11 (ii) (A) |
| 16 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii)For shutter area above 0.50 sqm(As per CSR-2020 item No.17.23-(ii) |
| 17 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (i) For shutter area up to 0.50 sqm(As per CSR-2020 item No.17.23-(i) |
| 18 | Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.(As per CSR-2020 item No.16.16) |
| 19 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.(As per CSR-2020 item No.16.17) |
| 20 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (As per CSR-2020 item No.16.13) |
| 21 | Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes.(As per CSR-2020 item No.8.11) |
| 22 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete. (a) 15mm i/d(As per CSR-2020 item No.28.35-a) |
| 23 | Providing and laying, jointing, fixing, and testing ISI Marked G.I Pipe (as per IS 1239) B- Class, premium make such as (Jindal Hissar) including cost of specials (Such as tees, bends, socket elbow etc.) painting with anticorrosive bitumastic paint, testing, cutting, threading inside building complete. (b) 20 mm i/d(As per CSR-2020 item No.28.35-b) |
| 24 | Providing and fixing in position Chinaware extended wall mounted E.W.C. type suite (size66x46x77.5cm) with Ptrapor Strap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. Chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (Make such as Cera, Hinware, Parryware, Jaguar & Kohler etc.)(As per CSR-2020 item No.30.5(a) |
| 25 | Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.(As per CSR-2020 item No.30.4) |
| 26 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. a. With C.P Brass nut.(As per CSR-2020 item No.30.8-a) |
| 27 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. (ii)Size 550 mm x 400 mm x 815 mm (Make such as Cera, Hinware, Parryware, Jaguar & Kohler etc.)(As per CSR-2020 item No.30.31-ii) |
| 28 | Providing and fixing vitreous chinaware standard pesdestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. (i) Vitreous chinaware standard white pedestal for wash hand basin.(As per CSR-2020 item No.30.43-i) |
| 29 | Providing & fixing in position 5 mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in-charge). (a) Size 600mmx450mm.(As per CSR-2020 item No.30.61-a) |
| 30 | Providing & fixing in position C.P/Aluminium khunti of approved make (to the approval of Engineer-in-charge) fixed into wall with c.p. brass screws and rawl plugs etc. complete in all respects. (b) C.P. Brass khunti with 4 pegs.(As per CSR-2020 item No.30.63-b) |
| 31 | Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect) (Make such as Cera, Hind ware, Parryware, Jaguar & Kohler etc.) (A) CP Brass fittings. |
| 32 | C.P Brass Bib cock with wall flange(As per CSR-2020 item No.30.69-A-ii) |
| 33 | C.P. brass 15mm Angular stop cock with Wall flange(As per CSR-2020 item No.30.69-A-iii) |
| 34 | Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.(As per CSR-2020 item No.30.56-A) |
| 35 | Providing and fixing in position premium range C.P brass fitting and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect) (B) C.P Brass accessories |
| 36 | C.P. brass towel rail 600 mm long(As per CSR-2020 item No.30.69-B-i) |
| 37 | C.P. brass soap dish holder with glass dish (As per CSR-2020 item No.30.69-B-iii) |
| 38 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect(b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut.(As per CSR-2020 item No.30.72-b) |
| 39 | Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self-cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc. (b) With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)(As per CSR-2020 item No.30.79-b) |
| 40 | Cutting chase in brick walls in cement or in floor for embedding G.I or C.I pipes line and making good the same to its original condition (a) Size 75 mm x 75 mm(As per CSR-2020 item No.30.85-a) |
| 41 | Cutting chase in brick walls in cement or in floor for embedding G.I orr C.I pipes line and making good the same to its original condition. (d) Size 225mm X 225mm(As per CSR-2020 item No.30.85-d) |
| 42 | Providing and fixing P.V.C Waste Pipe Collapsible 32mm complete in all respect.(As per CSR-2020 item No.30.20) |
| 43 | Providing and fixing in position automatic brass ball cock in tanks (b) Brass ball cock with rod and plastic ball (i) 15mm i/d(As per CSR-2020 item No.30.96 (B) (i)) |
| 44 | Providing and fixing and jointing brass ball valves screwed with SS/Brass ball/Spindle and Teflon seats on G.I Pipes lins including all carriages complete. (a) 15mm i/d Brass Ball valves.(As per CSR-2020 item No.28.44-a) |
| 45 | Providing & placing in position on terrace (at all floor level) HDPE Water Storage Tank of approved make (to the approval of Engineer-in-Charge) with cover with suitable looking arrangement and making necessary holes for inlet, outlet ant over flow pipe but without fitting and support for tank (i)Triple layer tank.(As per CSR-2020 item No.30.97-A-i) |
| 46 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. iii- (B) B-type - (b) 110mm o/d SWR UPVC pipe line laid complete.(As per CSR-2020 item No.30.74-iii-B-b) |
| 47 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. iii- (B) B-type - (b) 75mm o/d SWR UPVC pipe line laid complete.(As per CSR-2020 item No.30.74-iii-B-d) |
| 48 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. (a)15mm i/d G.I. Union(As per CSR-2020 item No.28.40-a) |
| 49 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. (b)20mm i/d G.I. Union(As per CSR-2020 item No.28.40-b) |
| 50 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of ngineer-in-charge) in PVC Water storage tanks complete in all respect. a) G.I. tank nipple 15mm i/d(As per CSR-2020 item No.30.98-a) |
| 51 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of engineer-in-charge) in PVC Water storage tanks complete in all respect. a) G.I. tank nipple 15mm i/d(As per CSR-2020 item No.30.98-b) |
| 52 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.(As per CSR-2020 item No.30.15) |
| 53 | Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.(As per CSR-2020 item No.30.23) |
| 54 | Providing and fixing partition for different type of urinals. (A) (ii) Toughened Glass partition 8mm thickness size 375mm x 750mm(As per CSR-2020 item No.30.21(A)(ii) |
| 55 | Recessed PVC Conduit Pipe Wiring System with Modular SwitchesWiring in PVC insulated copper conductor single core FR Cable (ISI Marked), 1100 Volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia 2mm thick ISI marked recessed in wall etc. complete with powder coated/anodized concealed metal boxes required for suitable number of modular for having electronic fan regulators, bell push, electronic buzzer, 3 pin 6 Amp, 3 pin 16/20 Amp. Sockets and 6 Amp./16/20 Amp switches (flush piano type accessories) etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc. & including the cost of flush piano type switches/sockets, step type electronic fan regulators 100 watts, PVC connectors (For fan box and electronic buzzers) PVC Bush Steel hooks, Circular Inspection Box ( Recessed Type and Deep type) Conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up the chases. |
| 56 | ii) Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.(As per CSR-2020 item No.34.02(ii) (AC Slip NO.3) |
| 57 | (v) Wiring 6Amp. Plug control comprising wall socket point(As per CSR-2020 item No.34.02(iv) (AC Slip No.3) |
| 58 | (vi) Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.(As per CSR-2020 item No.34.02 (vi) (AC SlipNo.3) |
| 59 | MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (vi) MCB Double Pole 6-32amp. (10kA, Curve C)(As per CSR-2020 item No.34.16 A (vi) (AC Slip No.3) |
| 60 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPERCONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge: - (e) Overall size 2.5sq.mm (50/0.25mm), 2Core.(As per CSR-2020 item No.34.09-xii-e (AC Slip No.3) |
| 61 | Cement concrete 1:2:4 (a)With stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type(As per CSR-2020 item No.10.13(a)-ii) |
| 62 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.(As per CSR-2020 item No.11.5) |
| 63 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete.(As per CSR-2020 item No.18.18) |
| 64 | Supplying & laying dry brick ballast.(As per CSR-2020 item No.10.30) |
| 65 | Providing and fixing manhole cover with frame 22\\" dia(Through GeM) |
| 66 | Providing & fixing MS strips(Through GeM) |
| 67 | Providing and fixing in position H.C.I. soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacturer of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. (i)-b-100mm i/d H.C.I. pipe lines laid complete.(As per CSR-2020 item No.30.74-i-b) |
| 68 | Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification of E.L.C. manufacture or any other reputed firm including cost of leadyarn, fuel and tools etc.(A)-b-100mm i/d (1.36 kg.)(As per CSR-2020 item No.30.77-A-b) |
| 69 | Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (i)-A-For 100mm i/d pipes -vi-100mm i/d Cowls.(As per CSR-2020 item No.30.81-i-A-vi) Please Enable Macros to View BoQ information |
