Tender For Steel Rate Contract - Qtr I 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 850 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500, Ghaziabad-Uttar Pradesh

TDR : 54626811

Tender Notice
BOQ

Expired

Ghaziabad , Uttar Pradesh

Tender Brief : Tender For Steel Rate Contract - Qtr I 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 850 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500

Document Fees
Refer document

EMD
Refer document

Tender Value
Refer document

Submission Date
23-03-2026

Competition Type
Indian

Bidding Type
Goods

Need a Business Loan? Apply Now !


1	CR COIL 0.63X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 850 X Coil form [T X W X L] [mm]
2	GP Sheet 0.63 mm Class VIII IS 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
3	CR COIL 0.80X850 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 850 X Coil form [T X W X L] [mm]
4	CR COIL 0.80X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 850 X Coil form [T X W X L] [mm]
5	CR COIL 0.80X750 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 750 X Coil form [T X W X L] [mm]
6	CR COIL 0.80X650 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 650 X Coil form [T X W X L] [mm]
7	CR COIL 0.80X300 IS 513CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 300 X Coil form [T X W X L] [mm]
8	CR COIL 0.80X300 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 300 X Coil form [T X W X L] [mm]
9	1.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 1 X W=1250 X L=2500 [T X W X L] [mm]
10	COLD ROLLED COIL 1.25 X 903 IS 513 GR.CR3; 1.25 X 903 X Coil form [T X W X L] [mm]
11	CR sheet 1.6 mm IS 513 CR2 - KLD; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
12	HR Sheets 1.6 mm IS 1079 Gr.HR2 SK/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
13	HR Sheet 2 mm IS 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
14	CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
15	CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 1250 X 2500 [T X W X L] [mm]
16	HR Sheets 2 mm IS 1079 Gr.HR2 SK/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
17	HR Sheets 2.5 mm IS 1079 Gr.HR2 SK/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
18	3.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 3 X W=1250 X L=2500 [T X W X L] [mm]
19	HR Sheet 3.15 mm IS 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
20	HR Sheets 3.15 mm IS 1079 Gr.HR1 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
21	HR Sheets 3.15 mm IS 1079 Gr.HR2 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
22	HR Sheet 4.0mm IS 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
23	HR Sheets 4 mm IS 1079 Gr.HR1 SK/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
24	HR Sheets 4 mm IS 1079 Gr.HR2 SK/K; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
25	Pl 5 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
26	Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
27	CQ Pl 5 mm IS 3502; 5 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
28	Pl 5 mm IS2062 E250 Gr BR/K; TDC:301 ; 5 (T) x 2000 (W) x (6300-12000) (L) [mm]; 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
29	Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 (T) x 2000 (W) x (6300-12000) (L); 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
30	Pl 5 mm IS2062 E250 Gr BR/K TDC:386; 5 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
31	Pl 6 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
32	Pl 6 mm IS2062 E350 Gr B0/K TDC:301; 6 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 6 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
33	Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
34	CQ Pl 6 mm IS 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
35	Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 (T) x 2000 (W) x (6300-12000) (L) mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
36	Pl 7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 7 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
37	Pl 8 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 8 X 2500 X L= 6300 [T X W X L] [mm]
38	Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
39	Pl 8 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 8 X 2000 X 12000 [T X W X L] [mm]
40	Pl 8 mm IS2062 E350 Gr B0/K TDC:386; 8 (T) x 2000 (W) x (6300-12000) (L) [mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
41	CQ Pl 8 mm IS 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [mm]
42	Pl 8 mm IS2062 E250 Gr BR/K TDC:301; 8 (T) x 3350 (W) x 6500 (L) [mm]; 8 X 3350 X 6500 [T X W X L] [mm]
43	Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 (T) x 2000 (W) x (6300-12000) (L) mm; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
44	Pl 8 mm IS2062 E250 Gr BR/K TDC:386; 8 (T) x 2500 (W) x (6300-12000) (L) [mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
45	Pl 8 mm IS 2062 E250Br/K TDC:6:386,; 8 X 2500 X 12000 [T X W X L] [mm]
46	Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
47	Pl 10 mm IS2062 E250 Gr BR/SK/K TDC 301 + UST as per ASTM A578 Level B, width 2500 mm, length 10000 mm; 10 X W = 2500 X L = 10000 [T X W X L] [mm]
48	Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2000mm, length 12000 mm; 10 X 2000 X 12000 [T X W X L] [mm]
49	PI 10 mm IS2062 E350 Gr BR TDC 301 Rev 12; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
50	Pl 10 mm IS2062 E350 Gr B0/K TDC:301; 10 (T) x 2500 (W) x (6300-12000) (L); 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
51	Pl 10 mm IS2062 E350 Gr B0/K TDC:301; 10 (T) x 2000 (W) x (6300-12000) (L); 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
52	Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
53	Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 1500mm, length 6300mm; 10 X 1500 X 6300 [T X W X L] [mm]
54	Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 10 X 2000 X 12000 [T X W X L] [mm]
55	Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 10000mm; 10 X 2500 X 10000 [T X W X L] [mm]
56	Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x (6300-12000) (L) mm; 10 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
57	Plate 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 (T) x 2000 (W) x 9000 (L) mm; 10 X 2000 X 9000 [T X W X L] [mm]
58	Pl 10 mm IS2062 E250 Gr BR/K TDC:386; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
59	Pl 12 mm IS2062 E350 Gr BR/K TDC:386; 12 (T) x 2500 (W) x (6300-12000) (L) [mm; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
60	Pl 12 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 12 X W= 2500 X 1000 ≤ L ≤ 12500 [T X W X L] [mm]
61	Pl 12 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 12 X 2500 X L= 6300 [T X W X L] [mm]
62	Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
63	Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 12 X 2500 X 12000 [T X W X L] [mm]
64	CQ Pl 12 mm IS 3502; 12 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
65	Pl 12 mm IS2062 E350 Gr BR/K TDC:301; 12 (T) x 2000 (W) x (6300-12000) (L) [mm]; 12 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
66	Pl 12 mm IS2062 E350 Gr B0/K TDC:386; 12 (T) x 2500 (W) x (6300-12000) (L) [mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
67	PLT BQ 12 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 12 mm x 2500 mm x 7500 mm: T X W X L (mm); 12 X 2500 X 7500 [T X W X L] [mm]
68	Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [mm]
69	Pl 16 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 16 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
70	Pl 16 mm IS2062 E350 Gr BR/K TDC:301; 16 (T) x 2000 (W) x (6300-12000) (L) [mm; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
71	Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
72	Pl 16 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 16 X 2500 X 12000 [T X W X L] [mm]
73	Pl 16 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 16 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 16 X 2500 X L= 6300 [T X W X L] [mm]
74	Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
75	Pl 16 mm IS2062 E350 Gr B0/K TDC:386; 16 (T) x 2500 (W) x (6300-12000) (L) [mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
76	PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 16 x 2500 x 5700 [T X W X L] [mm]; 16 X 2500 X 5700 [T X W X L] [mm]
77	PL 16 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 16 mm x 2500 mm x 6500 mm : T X W X L (mm); 16 X 2500 X 6500 [T X W X L] [mm]
78	PLT BQ 16 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 16 mm x 2500 mm x 13000 mm: T X W X L (mm); 16 X 2500 X 13000 [T X W X L] [mm]
79	PLATE 16.0 MM - SA515GR70; 16 X 2000 X 6375 [T X W X L] [mm]
80	Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 20 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
81	Pl 20 mm IS2062 E350 Gr B0/K TDC:301; 20 (T) x 2000 (W) x (6300-12000) (L); 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
82	PLATE 20.0 MM; IS2062E350 GR B0; TDC:6:386:REV:03: 20 x 2500 x (10000-12000) (T x W x L) mm; 20 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
83	Pl 20 mm IS2062 E350 Gr BR/K TDC:301; 20 (T) x 2000 (W) x (6300-12000) (L) [mm]; 20 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
84	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
85	Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 x 2500 x 7100 [T X W X L] [mm]; 20 X 2500 X 7100 [T X W X L] [mm]
86	Pl 20 mm IS2062 E350 Gr B0/K TDC:386; 20 (T) x 2500 (W) x (6300-12000) (L) [mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
87	PL 20 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 20 mm x 3200 mm x 8000 mm: T X W X L (mm); 20 X 3200 X 8000 [T X W X L] [mm]
88	PLT BQ 20 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403); 20 mm x 2500 mm x 12500 mm: T X W X L (mm); 20 X 2500 X 12500 [T X W X L] [mm]
89	PLATE 20 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 20 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
90	PLATE 22 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 22 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
91	Pl 25 mm IS2062 E350 Gr BR/K TDC:386; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
92	Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
93	Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 25 X 2500 X 8000< L < 12500 [T X W X L] [mm]
94	Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
95	Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2000 (W) x (6300-12000) (L) [mm]; 25 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
96	Pl 25 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 6300mm; 25 X 2500 X 6300 [T X W X L] [mm]
97	PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [mm]
98	Pl 25 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 25 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 25 X 2500 X L= 6300 [T X W X L] [mm]
99	PL.25 x 2500 x 12000 is 2062 E250 Gr. Br. TDC 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [mm]
100	Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 (T) x 2500 (W) x (6300-12000) (L) mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
101	PL25 E250GR-BR/K TDC:6:386; 25X3100X12000 ; T (mm) x W (mm) x L (mm); 25 X 3100 X 12000 [T X W X L] [mm]
102	Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 x 3200 x 12800 [T X W X L] [mm]; 25 X 3200 X 12800 [T X W X L] [mm]
103	Pl 25 mm IS2062 E350 Gr B0/K TDC:386; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
104	PL 25 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 25 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
105	PLATE 25.0 MM - SA515GR70; 25 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
106	PLATE 25 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 25 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
107	PLT BQ 25 MM (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 25 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 25 X 2500 X 13000 [T X W X L] [mm]
108	PI 28 mm IS2062 E350 Gr BR TDC 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
109	Pl 28 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
110	Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [mm]
111	Pl 28 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 28 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 28 X 2500 X L= 6300 [T X W X L] [mm]
112	PLT BQ 28 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 28 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 28 X 2500 X 13000 [T X W X L] [mm]
113	PI 30 mm IS2062 E250 GR BR TDC:6:386 Rev 03; 30 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
114	Pl 30 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435; 30 (T) x 2500 (W) x 10000 (L) [mm]; 30 X 2500 X 10000 [T X W X L] [mm]
115	PL 30 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 4000 ; L= 6750;[Thickness, Length (L) & Width (W) are in mm]; 30 X 4000 X 6750 [T X W X L] [mm]
116	PLATE 30.0 MM - SA515GR70; 30 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
117	PLATE 30 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 30 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
118	PL 30 mm IS 2002 GRADE-2; TDC: AA10401; W = 2500 ; L= 8000; [Thickness, Length (L) & Width (W) are in mm]; 30 X 2500 X 8000 [T X W X L] [mm]
119	Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
120	Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
121	Pl 32 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 32 X 2500 X L= 6300 [T X W X L] [mm]
122	Pl 32 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 3000 mm, length 7000 mm; 32 X W = 3000 X L = 7000 [T X W X L] [mm]
123	PLATE-32 IS2062 E250BR TDC:301 Rev 12; 32 X 2500 X 12000 [T X W X L] [mm]
124	Pl 32 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 2500 mm, length 12500 mm; 32 X W = 2500 X L = 12500 [T X W X L] [mm]
125	PI 32 mm IS2062 E350 Gr BR TDC 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
126	Pl 32 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
127	PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [mm]
128	Pl 32 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 32 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 32 X 2500 X L= 6300 [T X W X L] [mm]
129	PL32 E250GR-BR/K TDC:6:386; 32X2650X11100 ; T (mm) x W (mm) x L (mm); 32 X 2650 X 11100 [T X W X L] [mm]
130	PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 32 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
131	PL 32 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 32 mm x 2500 mm x 6500 mm : T X W X L (mm); 32 X 2500 X 6500 [T X W X L] [mm]
132	PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 32 mm x 3200 mm x 12500 mm: T X W X L (mm); 32 X 3200 X 12500 [T X W X L] [mm]
133	PLT BQ 32MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 32 X 2500 X 10000 [T X W X L] [mm]; No. of cycles required in SHT: 01 no.; 32 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
134	PLATE 35.0 MM - SA515GR70; 35 X 2000-2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
135	PLATE 35 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 35 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
136	Pl 36 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12500mm; 36 X W=2500 X L =12500 [T X W X L] [mm]
137	PI 36 mm IS2062 E350 Gr BR/K TDC 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
138	Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
139	Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [mm]
140	Pl 36 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [mm]
141	PL 36 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 36 mm x 3200 mm x 12500 mm: T X W X L (mm); 36 X 3200 X 12500 [T X W X L] [mm]
142	Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
143	Pl 40 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12000mm; 40 X W=2500 X L =12000 [T X W X L] [mm]
144	PI 40 mm IS2062 E350 Gr BR TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
145	Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [mm]
146	Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
147	Pl 40 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 40 X 2500 X 12000 [T X W X L] [mm]
148	Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [mm]
149	PLATE 40 MM; IS2062 E250GRBr; TDC:6:386:REV:03: 40 x 2500 x (10000-12000) (T x W x L) mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
150	HR PLATE 40 mm, IS2062 E250 Gr BR/K TDC:386; 40 (T) x 2750 (W) x 12000 (L) [mm]; 40 X 2750 X 12000 [T X W X L] [mm]
151	Pl 40 mm IS2062 E350 Gr BR/K TDC 301 + UST as per ASTM A435; 40 (T) x 2500 (W) x 12000 (L) [mm]; 40 X 2500 X 12000 [T X W X L] [mm]
152	PL 40 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 40 mm x 2850 mm x 8500 mm: T X W X L (mm); 40 X 2850 X 8500 [T X W X L] [mm]
153	PLATE 40 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 40 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
154	PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 6300 [T X W X L] [mm]
155	PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 8400 [T X W X L] [mm]
156	Pl 45 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
157	Pl 45 mm IS2062 E250 Gr Br.K TDC 301 Rev 12;45 x 2500 x 6300-12000; ( T x W x L) mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
158	Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
159	Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2000 - 2500 mm, length 8000- 12000 mm; 45 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
160	Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm; 45 X 2500 X 12000 [T X W X L] [mm]
161	PL 45 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 45 mm x 2500 mm x 6500 mm : T X W X L (mm); 45 X 2500 X 6500 [T X W X L] [mm]
162	PL 45 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1) + bend test as per ASTM A 20); 45 mm x 2500 mm x (8000-12000) mm: T X W X L (mm); 45 X 2500 X 8000-12000 [T X W X L] [mm]
163	Pl 50 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 50 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
164	Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
165	Pl 50 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 50 X 2500 X 12000 [T X W X L] [mm]
166	PI 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
167	Pl 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [mm]
168	PL 50 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 50 X 2500 X 6000< L < 12000 [T X W X L] [mm]
169	PL 50 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 50 mm x 3200 mm x 6300 mm: T X W X L (mm); 50 X 3200 X 6300 [T X W X L] [mm]
170	PLATE 50 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 50 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
171	Pl 56 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
172	Pl 56 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 56 X W=2500 X L =8000 [T X W X L] [mm]
173	Pl 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 56 X 2500 X 12000 [T X W X L] [mm]
174	PLATE 56 MM; IS2062 E250GR Br; TDC::301:REV:12: 56 x 2500 x (10000-12000) (T x W x L) mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
175	PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 56 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
176	PL 56 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 56 X 2500 X 6300 [T X W X L] [mm]
177	PI 60 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
178	Pl 63 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
179	Pl 63 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 63 X W=2500 X L =8000 [T X W X L] [mm]
180	Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
181	Pl 63 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 63 X 2500 X 12000 [T X W X L] [mm]
182	PL 63 IS 2062 E250GR-BR/K, TDC:301, 63 X 1875 X 9000 [T X W X L] [mm]; 63 X 1875 X 9000 [T X W X L] [mm]
183	PLATE 63 MM; IS2062 E350GR Br; TDC::301:REV:12: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
184	PLATE 63.0 MM; IS2062E250 GR Br.; TDC:6:386:REV:03: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
185	PL 63 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) are in mm]; 63 X 3600 X 7800 [T X W X L] [mm]
186	PL 63 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 63 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
187	PL 63 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 63 mm x 2500 mm x 6500 mm : T X W X L (mm); 63 X 2500 X 6500 [T X W X L] [mm]
188	PL 63 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 63 mm x 3200 mm x 6300 mm: T X W X L (mm); 63 X 3200 X 6300 [T X W X L] [mm]
189	Pl 70 mm IS 2062 E 250 Gr A/BR/SK/K; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
190	Pl 70 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
191	PL 70 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 70 X 2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
192	PL 70 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 70 mm x 3200 mm x 6300 mm: T X W X L (mm); 70 X 3200 X 6300 [T X W X L] [mm]
193	PLATE 70 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
194	Pl 75 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 75 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
195	PI 80 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 80 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
196	PL 80 IS 2062 E250GR-BR/K, TDC:301, 80 X 2500 X 7650 [T X W X L] [mm]; 80 X 2500 X 7650 [T X W X L] [mm]
197	Pl 80 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435; 80 (T) x 2800 (W) x 11200 (L) [mm]; 80 X 2800 X 11200 [T X W X L] [mm]
198	Pl 80 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 80 x 2850 x 10700 [T X W X L] [mm]; 80 X 2850 X 10700 [T X W X L] [mm]
199	PL 80 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) are in mm]; 80 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
200	PL 80 MM A516 GRADE-70; TDC: AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test (Sl. No. 5 of Annexure-1); 80 mm x 3200 mm x 6300 mm: T X W X L (mm); 80 X 3200 X 6300 [T X W X L] [mm]
201	Pl 90 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
202	PL 90 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 90 mm x 2500 mm x 6300 mm: T X W X L (mm); 90 X 2500 X 6300 [T X W X L] [mm]
203	PI 100 mm IS2062 E250 Gr BR TDC 301 Rev 12;UT: ASTM A578 Level A/SA435; 100 X 2500 X 6000-12000 [T X W X L] [mm]
204	Pl 100 mm IS 2062 E250 Gr BR; 100 X 2500 X 6000< L < 12000 [T X W X L] [mm]
205	Pl 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 x 2500 x 6000 [T X W X L] [mm]; 100 X 2500 X 6000 [T X W X L] [mm]
206	PL 100 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) are in mm]; 100 X 2200 X 4800 [T X W X L] [mm]
207	PL 100 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 100 mm x 2500 mm x 6300 mm: T X W X L (mm); 100 X 2500 X 6300 [T X W X L] [mm]
208	Pl 110 mm IS 2062 E 250 Gr A/BR/SK/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
209	Pl 110 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;110 x 2500 x 6300-12000; ( T x W x L) mm; 110 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
210	Pl 110 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
211	Pl 110 mm IS2062 E350 Gr BR/K TDC:301; 110 (T) x 2850 (W) x (6300-12000) (L) [mm]; 110 X 2850 X 6300 ≤ L ≤ 12600 [T X W X L] [mm]
212	PL 110 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 1650 ; L= 8000;[Thickness, Length (L) & Width (W) are in mm]; 110 X 1650 X 8000 [T X W X L] [mm]
213	PL 110 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 110 X 2000≤ W ≤2500 X 6000 ≤ L ≤ 8000 [T X W X L] [mm]
214	PI 125 mm IS2062 E250 Gr BR TDC 301 Rev 12;UT: ASTM A578 Level A/SA435; 125 X 2500 X 6000-12000 [T X W X L] [mm]
215	Pl 130 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [mm]
216	PI 140 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435; 140 X 2500 X 6000-12000 [T X W X L] [mm]
217	PL 140 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) are in mm; 140 X 2000 X 10500 [T X W X L] [mm]
218	Pl 155 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 155 X 1800 X 5600 [T X W X L] [mm]
219	PI 160 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435; 160 X 2500 X 6000-12000 [T X W X L] [mm] Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttar Pradesh Tenders

Machinery And Tools Tenders

Manufacturing Machinery Tenders

Machine Tools Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Steel Rate Contract - Qtr I 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 850 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Steel Rate Contract - Qtr I 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 850 X Coil Form [T X W X L] [Mm] , Gp Sheet 0.63 Mm Class Viii Is 277; 0.63 X 900 ≤ W ≤ 1250 X L = 2500, Ghaziabad-Uttar Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us