|
| 1 | Dismantling of Plain Cement Concrete including labour charges etc., complete including all cost and conveyence etc., complete |
| 2 | Earthwork excavation and depositing on bank with an initial lead and lift in all classes of soil including the cost and conveyance of all materials and all labour charges etc. complete as per standard speicfication. |
| 3 | Plain cement concrete 1:4:8 mix using 40mm ISS size HBG metal from approved quarry including the cost and conveyance of all materials and all labour charges etc. complete as per standard speicfication. |
| 4 | Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Complete as per standard specfication. |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification. |
| 6 | Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 7 | Supplying , fabricating and placing in position of MS or RTS rods for cutting, bending, straightening of rods and tying the grills for reinforcementwith necessary binding wire including all cost and conveyance of materials to site with all labour cost ect.,complete as per standard specification. |
| 8 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. |
| 9 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 10 | Chain Link - 2\\" x 2\\" using 10 Gauge Galvanised IronWire (of all sizes) including all the cost and conveyance of materials to site and all labour charges etc., complete as per standard specification |
| 11 | Providing Painting two coats with ready mixed synthetic enamel paint to new iron work using best and approved colour including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification. |
| 12 | Supply and fixing of 16A TPN metal clad switch on suitable angle iron work with cable entry boxes for incoming and outgoing with PWD earthing(SD 145) |
| 13 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary 'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.(SD 74 ) |
| 14 | Supplying and fixing of 4 way three phase DB of 16amps/way with 16amps DP switch with metal glad of 500 volt(side handle) with Fuse and Neutral of suitable T.W. Board of size 40cm x30cmx6.3cm with earth connection etc., complete in all respects as directed by the departemental officers (SD 146) |
| 15 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End (SD 515) |
| 16 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch in flush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator) (SD 2) |
| 17 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire and making good of the concealed portion (SD 333) |
| 18 | Supply and Run of 2 of 2.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains (SD 364) |
| 19 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRL Scopper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earthwire connection of 4sq.mm copperwire and making good of the concealed portion with suitable colour. (derived from SD 57) |
| 20 | Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3Nos 32A fuse unit (500V) 32A neutrallink and earthlink (1\\"x1/8\\"copperflat) on TW plank of size 600mm x450mm x19mm with supporting TW reepers of 1\\" thick aneither side with painting with suitable bolt and nuts for fixing the TW plank on wal lwith earth connection and interconnection with 7/20 PVC insulated copperwire from EBmeter to fuse unit with 1No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection. (SD 128) |
| 21 | Supply and fixing of 32A fuse units on suitable TW board with necessary internal connections for controlling the power plug. |
| 22 | Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection (SD 127) |
| 23 | supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .SD 446 |
| 24 | Supplying and fixing GI Steel tubular pole for street light of 8 Meter length doubel brakcet pole with base plate including cost of material, labour, lead, lift etc., 25mm 3way Ball Valve Please Enable Macros to View BoQ information |
