Name of Work:- Supply and fixing of Overhead Gantry Sign Board and other signage works at Industrial area Khoda
Sl. No.
Item Description
1
Supply and fixing of Overhead or cantilever type XI retro reflective sign plate made out of 3 mm thick Aluminium composite panel, faces to be covered with green type XI retro reflective sheeting and the matter and logo with overlay film type of sheating after the etching treatment of aluminium sheeting.The backside of sheeting should be covered with two coats of epoxy or powder coating.This sheet shall be fixed on a frame of 40x40x5 angle iron
2
Supply of steel structure in single section Built up section frame from M.S. black pipes ( medium duty) as per IS 1239(part1)1979 with connecting plate anchor bolts including cutting, welding, bolting, fixing in position and applying primer coat of approved steel primer and two coats of synthetic enamel paint including foundation bolts
3
Foundation work of foundation in RCC 1 2 4 including excavation, reinforcement, shuttering ,backfilling and removal of excess earth as per drawing.
4
Erection with gantry crane at site including nut bolting etc.
5
Traffic SignsRetro-reflectorised Traffic SignsProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens typer eflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting ,1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mm x 450mm x 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801600 mm x 600 mm square
6
Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
