|
| 1 | INCOMER FEERDER/ TIE FEEDER:SUPPLY AND DELIVERY OF 11 KV, 800 A, 26.3 KA FOR 3 SEC, BIL- 20 KV RMS/60 KVP, 12NO+12NC, 64 PIN 8BK88 PLUS INDOOR TYPE VCB SWITCHBOARD WITH COPPER BUS BAR COMPRISING THE FOLLOWING EQUIPMENTS- CT- 800- 400/5- 5A, (15 VA, CL 1.0 & CL 5P10), PT - 6600 / 1.732 /110/ 1.732 (200 VA, CL- 0.5 AND 50 VA, CL-3P), FEEDER PROTECTION RELAY- 7SR1003 (50-51-50N-51N) WITH MODBUS PROTOCOL, AUX RELAY- VAJH 13, VAX-31, VOLTMETER WITH VSS, AMMETER WITH ASS AND MFM- ELITE 447, CL- 1.0 WITH RS 485, 8-WINDOW ANNUNCIATOR, 110 V DC FOR CLOSING AND TRIPPING THROUGH POWER PACK, 220 V AC FOR SPRING CHARGING MOTOR, HOOTER, INDICATION LAMP, TERMINAL BLOCK, FUSE, MCB ETC. (DETAILED BILL OF MATERIALS ENCLOSED IN SEPARATE SHEET) MAKE: SIEMENS/SCHNEIDER/ABB (COMPLYING SPECIFICATIONS) |
| 2 | ERECTION, TESTING & COMMISSIONING OF 11 KV, 800 A, 25 KA FOR 3 SEC, 12 PANEL VCB SWITCH BOARD WITH AI BUSBAR COMPRISING FOLLOWING PANEL-(FOR EACH PANEL) 1. INCOMER-2 NOS., 2. BUS COUPLER -1 NO., 3. MOTOR FEEDER- 5 NOS. 4. TRANSFORMER FEEDER- 02 NOS. ALL REQUIRED TOOLS AND TACKLES ARE TO BE PROVIDED BY THEIR OWN TO EXECUTE THE JOB |
| 3 | 5.3 A.3. SUPPLYING OF 11KV GARDE 3 CORE 400 SQ.MM HT POWER CABLE WITH STRANDED COMPACT CIRCULAR ALUMINIUM CONDUCTOR , CONDUCTOR SCREEN WITH EXTRUDED SEMI CONDUCTING COMPOUND, XLPE INSULATED, INSULATION SCREENING WITH EXTRUDED SEMI CONDUCTING COMPOUND IN COMBINATION WITH COPPER TAPE CORES LAID UP, INNERSHEATH OF PVC, GALVANISED STEEL FLAT STRIP ARMOURED, AND OVERALL PVC SHEATHED CABLE CONFORMING TO IS 7098(PART-2) WITH UP TO DATE AMENDMENTS. PAGE- 102 USOR (M&E) IRRIGATION AND WATERWAYS DEPARTMENT. WEF 10 MAY 2022 |
| 4 | Making Indoor type End termination Joint by providing all required terminal joints accessories {viz Heat Shrink Type End Termination Jointing Kits complete with all accessories for 3 core 6.6KV(UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor}& man/equipments tools & tackles etc with the relevant Switch Gear inside the Pumping Station or Switch Room with care & caution including compliance of relevant safety norms & conforms to the relevant IS and complete in all respect as per direction of EIC. 3 core 6.6KV (UE)-11KV (E) XLPE Screened Cable, Aluminium Conductor of following Sizes 400 Sq mm Indoor type Heat Shrinkable Joint (Rechem KIT No- EPKT 3131) |
| 5 | Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 3 core.(xv)upto 400 sqmm |
| 6 | SUPPLY OF COPPER CONDUCTOR, PVC INSULATED ARMORED 1100 VOLTS GRADE CONTROL CABLE OF SIZE 2.5 SQMM X 10 CORE. (RATE APPROVED BY DG WS 31/11/19) |
| 7 | 5.3 B/4 LAYING OF ONE NUMBER PVC INSULATED AND PVC SHEATHED/XLPE POWER CABLE OF 11 KV GRADE OF FOLLOWING SIZE IN THE EXISTING MASONRY OPEN DUCT AS REQUIRED. (B) ABOVE 120 SQ.MM. AND UP TO 400 SQ.MM. PAGE- 103 USOR (M&E) IRRIGATION AND WATERWAYS DEPARTMENT. WEF 10 MAY 2022 |
| 8 | SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation by GI pipe ... (FOR Sub(station Neutral/Equipment earthing).Earthing with 80 mm dia GI pipe (TATA(Medium)x 3.0 Mts. long and 1 No. 65 mm x 8 mm galvanized (HOT Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 80 mm dia GI pipe (ISI Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. |
| 9 | Earth busbar Supplying & fixing earth busbar of galvanized (HOT Dip) MS flat 65 mm x 8 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 10 | Fan : Supply & Fixing of per FORated GI cable tray with per FORation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With 25x25x3mm angle iron support 300x50x1.25mm (18SWG) |
| 11 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m |
| 12 | CHAPTER - VIII SUPPLYING OF MATERIALS HIRE CHARGES OF MACHINERIES 8.26 Hire charges of moveable crane with fuel & manpower having load handling capacity upto 14MT with the 45 deg. moveable arrangement & the boom length of 40 feets for loading & unloading of various materials / accessories of water supply works. For minimum engagement of 8 hrs. In a day |
| 13 | SEMI-SKILLED CATAGORY (AS PER MUNICIPAL SECRETARY CIRCULAR NO.06 OF 2025-26 DATED 24.07.2025 ) |
| 14 | SUPPLY ,FIXING ,TESTING & COMMISSIONING WALL/FLOOR MOUNTED LT PANEL PRIMER COATED WITH POWDER COATED PAINT & PROVIDED WITH REQUIRED GASKET FOR DUST / VERMIN PROOF WITH DEGREE OF PROTECTION IP42 SUITABLE FOR 415 VOLT 3 PHASE ,50 HZ, 4 WIRE SYSTEM FABRICATED OUT OF CRCA SHEET UP TO 2 MM THICK (1.6MM FOR DOORS) DULY COMPARTMENTALIZED FOR INCOMER ,BUS SECTION ,OUTGOINGS, CABLE ALLEYS & CT,PT AMPERE ,VOLT ,SELECTOR SWITCHES, FREQUINCY ,PHASE INDICATING LAMP, ENERGY COMPLETE INCLUDING COST OF BUSBAR SUPPORTS ,DETACHABLE CABLE GLAND PLATES, 2 EARTHING TERMINALS , INTERNAL WIRING & FIXING OF SEPERATELY SUPPLIED MCBS, MCCBS, ACB, PANEL MOUNTED CHANGEOVER SWITCH/SFUS,ETC AS REQUIRED BUT EXCLUDING COST OF BUSBAR STRIPS, AMPERE,VOLT SELECTOR SWITCH AS PER APPROVED DESIGN & SPECIFICATION. UNIFIED SCHEDULE OF RATES (ELECTRICAL & MECHANICAL ) IW DEPT , ITEM 5.3 D 1,PAGE 105 |
| 15 | SUPPLY OF COPPER BUSBAR FOR ELECTRICAL POWER DISTRIBUTION. UNIFIED SCHEDULE OF RATES (ELECTRICAL & MECHANICAL ) IW DEPT , ITEM 5.3 D 5,PAGE 105 |
| 16 | Sub Total |
| 17 | GST 18% |
| 18 | CESS 1% Please Enable Macros to View BoQ information |
