|
| 1 | Dismantling and removing 2.5 cm thick grading concrete from roof slab |
| 2 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6.7mm & down grades size hard granite crusher broken chips on new work in Ground Floor |
| 3 | Dismantling and removing old tiled flooring including stacking the useful materials for reuse and removing the debris within 50m lead |
| 4 | Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) |
| 5 | Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) |
| 6 | 16 mm thick Cement Plaster (1:6) over Brick Masonry |
| 7 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface |
| 8 | Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein |
| 9 | Supplying, fitting & fixing of CeramicTiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. |
| 10 | Supplying, fitting & fixing of Ceramic Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc |
| 11 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges |
| 12 | Supplying Fitting, fixing up fully glazed aluminium framed window (sliding type) made up aluminium section 9778 as window frame, section 4095, 4096 and 9777, 3994 as shutter frame with 5mm black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, all taxes, labour, T&P excluding cost of glass etc. complete as per direction of the Engineer-in-charge |
| 13 | Providing, fitting and fixing of Al door with anodized Al. door section of 9202 as vertical member, 9201 as top and 9200 as middle and bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, labour charges , etc. |
| 14 | Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with water proof Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete |
| 15 | Supplying and Fixing of M.S. Grills, M.S.Doors, M.S. Gate etc including cost,conveyance of all materials and labour for fitting fixing etc.complete as per the instruction of Engineer-in-Charge |
| 16 | Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer |
| 17 | Providing and laying factory made chamfered edge cement concrete coloured paver block 60 mm thick of M 35 grade of required strength thickness and size/shape made by table vibratory method to attain superior smooth finishing using PU or equivalent moulds laid in required colour & pattern over 50mm thick compacted bed of course sand,compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compacting by using plate vibrator.Filling joints with fine sand and cutting of paver blocks as per required size/pattern, finishing and sweeoing sand in foot path,parks,lawns,drive ways or light traffic parking and lanes/roads etc,all complete as per spacification and direction of E.I.C. |
| 18 | Earth work in excavation in hard soil or gravelly soil including dressing and levelling |
| 19 | Sand filling as per approved drawing and technical specifications as per Section 2100 of MoRT&H Specifications for Road & Bridge works (4th Revision). |
| 20 | Plain cement concrete (1:3:6) nominal mix in foundation as per Drawing and Technical Specification |
| 21 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying |
| 22 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in Ground Floor |
| 23 | Rigid and smooth centering & shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor |
| 24 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment. in Ground Floor |
| 25 | Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % in foundation and plinth |
| 26 | 12mm thick Cement Plaster (1:6) over Brick Masonry finished smooth in Ground Floor |
| 27 | Supplying and fixing of toilet doormade of fiver |
| 28 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with coist, conveyance, taxes of all materials, labour and T&P required for the work all complete in all respect |
| 29 | Display board Please Enable Macros to View BoQ information |
