|
| 1 | Improvement work |
| 2 | Earth work excavation in hard gravelly soil with an initial lead of 10 m and lift of 2 m etc.for foundation |
| 3 | Supply and filling the basement with 'M' sand for foundation and basement including watering consolidation etc., complete |
| 4 | PCC 1:3:6 using 40m HB stone for foundation including cost of all materials and labour etc., complete (Column & Column Footing) |
| 5 | RCC 1:1.5:3 using 20mm HB stone with form work for lintels and sunshade including cost of cement, all materials lead and lifts etc., complete (Column & Column Footing) |
| 6 | RCC 1:1.5:3 using 20mm HB stone with form work for lintels and sunshade including cost of cement, all materials lead and lifts etc., complete (Grade Beam & Plinth Beam) |
| 7 | Providing steel reinforcements for RCC works including cost of steel, binding wire and labour for cutting bending tying and placing in position etc., complete. |
| 8 | Brick Work in Cement mortar 1:5 using Country bricks for basement and super structure including cost of all materials,labour lead ,lift etc complete ( Basement) |
| 9 | Brick Work in Cement mortar 1:5 using Country bricks for basement and super structure including cost of all materials,labour lead ,lift etc complete (Super structure) |
| 10 | Plastering the walls with CM 1:5,12mm thick including cost of all materials,labou,lead,lift and scafolding etc complete. |
| 11 | Fabrication,Supply & Fixing of steel framed single leaf door using 50x6mm MS angle for door frame,40x40x6mm Ms angle for shutter frame 16 gauge GI sheet panels including cost of all materials etc |
| 12 | Fabrication,Supply & Fixing of steel framed double leaf window using 35x35x6mm MS angle for window frame,25x25x6mm Ms angle for shutter frame,ISNT 40 for centre Tee, 4mm pinheaded galss panels, 10 mm Square road spacing at 10 cm including cost of all materials etc |
| 13 | Supplying and fixing of steel Gate using MS flats of size not less than 12x5mm and suitable angles as per the instruction of Engineer incharge including painting two coats of enamel paint over a coat of one coat of primer including cost of materials, labour charges, lead, lift etc., complete |
| 14 | Supplying and fixing G.I Sheet roof for New Vizhunthamavadi Section Office accommodation, including cost of all materials, lead,lift, labour charges etc Complete. |
| 15 | Fabrication for steel roofing to Collection center and Shed Premises including cost of steel, and labour for cutting, bending, tying and placing in Position, lead, lift,etc.,complete. |
| 16 | Plastering with C.M.1:3, 12mm thick for flooring including cost all materials,labour,lead,lift, Scafolding etc., complete. |
| 17 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC light point and Fan Point.(As per PWD Electrical Data SD25) (Fan point) |
| 18 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW switch box and 5 A F.T switch with continuous earth wire connection of 14 SWG TC for making good of the concealed portion with suitable colour for PVC concealed PVC light point and Fan Point.(As per PWD Electrical Data SD25) (Light point) |
| 19 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with 150mm X 100mm X 113 mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking CS plug wire with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug poit. (As per page No.24 SD 38 of PWD Electrical Data Book). |
| 20 | Wiring with 2 x 1.5sq mm (22/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3 mm thick hylem sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point |
| 21 | Supplying and Fixing of Single box type 4’ 40W flu. Fitting complete with copper choke and condenser with TW round blocks on wall or ceiling with flu. tube with PVC unsheathed copper leads from terminals to the fitting. |
| 22 | Supplying and fixing of 1200 mm (48”) AC ceiling fan complete with stepped electronic 300W regulator with 300 mm down rod on the existing clamp |
| 23 | Cement paint for outer and Inner walls two coats including cost of all materials,lead,lift etc complete Please Enable Macros to View BoQ information |
