|
| 1 | HT SF6 Load Break Switch /RMU (SW-HTS) Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 6 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 2 nos. feeder with 2 LBS and 4 nos. feeder with 4 VCB compliant to IEC 62271-100, 200 and 102 as per specification no. SW-HTS/RMU SCADA. |
| 2 | C.C. Foundation Making M-20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at size of 1.50 m X 1.50 m X 2 m including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5m raising lowering high mast). |
| 3 | LT Cables (Aluminum) (CB-LT/AL) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 4 | Supply and erecting iron work,, sheet metal work consisting of MS sheets, various sections of iron plates, chequired plates, rode bars, MS pipes etc for RMU panel, board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions of engineers. |
| 5 | Accessories Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of \\"C\\" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. |
| 6 | HT Cables (CB-HT) Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 7 | Cable Enclosures (CB-CE) Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, complete. |
| 8 | Plate, Pipe type Earthing (EA-EP) Supplying, installing and testing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all accessories of copper materials & recording the results as per specification no. EA-EP |
| 9 | Supply and erection of SS 304 fabricated frame with machined hinges for erection in cement concrete and suitable for SS gate having size 1200mm x 1200mm |
| 10 | Designing fabrication S.S.304 grade materials inlet gate with S.S. frame size 1200 mm x 1200 with vertical sliding gate 12 mm ss plate and supporting with 16 mm X 16 mm square bar with up and down arrangement with TAFLON material groved for lifting arrangement with shaft and coupling and verm gear assembly. (Rate as per excluding GST) |
| 11 | Change Over Switch, SDF (SW-SWR) Supplying and erecting switch disconnector fuse (SDF) 4 pole, 415V, 400A, with enclosure, AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC - DIN type fuse switch, insulation voltage 1000V for enclosing in panel with rotary handle for ON/OFF operation (without HRC fuse) as per specification no. SW-SWR/SDF. |
| 12 | Credit for Dismantled Material H.G. / M.S. / G.I. Materials / Poles etc. |
| 13 | Centrifugal pumps (WP-CGP) Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 415 V, three phase, 50 Hz, A.C. supply of 7.5 kW/10 HP with discharge 1380/660 lpm for head of 24/72 m and 65 mm suction/50 mm delivery pipe on provided CC foundation as per specification no. WP-CGP. |
| 14 | Accessories Supplying, erecting, testing and commissioning of fully automatic star/delta starter suitable for 12.5 HP to 15 HP for three phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. Please Enable Macros to View BoQ information |
