Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - at all levels, 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size), including lead to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, mixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability including lead, lift upto floor three level as per direction of Engineer - in - charge. PCC Work (raised area and under carpet) |
| 2 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads, lift above third floor as per standards, specification; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Concrete of M25 grade with minimum cement content of 400 kg /cum |
| 3 | Proving and laying steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for all leads, lift above third floor as per standards and direction of the engineer-in-charge. Mild steel and Medium Tensile steel bars- FE500D or above. |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, screeda, girders, bressumers and cantilevers for all leads, lift upto third floor as per standards and direction of the engineer-in-charge. |
| 5 | Providing and constructing solid block masonry in CM 1:4 (1 cement, 4 crushersand) in partition walls, parapets, etc. with blocks of standard sizes and of approved quality (average compressive strength not less than 10N/mm2) including scaffolding, raking out of joints, curing, cost and conveyance of all materials, lead,lift, etc.complete including providing 2 Nos. of 6mm dia bars as reinforcement at every third layer wherever specified (Reinforcement shall be measured and paid for under relevent item ) and for all leads, lift upto third floor as per standards and direction of the engineer-in-charge. |
| 6 | Providing and laying of light weight AAC block after laying of soil pipes, floor traps is completed the floor of the sunken portion shall be covered with block embedded manually, having top layer of 50 mm thk waterproof mortar 1:4 ( 1 cement : 4 coarse sand ) using specialized W.P. chemical, finished smooth / rough with floating coat of neat cement all complete and as per specification, for all leads, lift upto third floor as per standards and direction of the engineer-in-charge. |
| 7 | Providing and applying of single coat backing plaster of 15-18 mm thick in CM 1:4 proportion to the walls & others surface including scaffolding, curing the joints, etc. The rates are inclusive of providing chicken mesh of 18mm gauge & 150mm width at junction of brick & RCC etc. at the walls, columns, beams etc., seven days water treatment as anti crack of plaster. Complete as per site engineer's instruction. |
| 8 | Providing and fixing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel epoxy primer and epoxy paint all complete. (for curve ceiling support and other frames- Like bulkhead etc) |
| 9 | Providing and fixing aluminium framework for all types of partitions, panelling etc fabricated from extruded aluminium hollow box sections of approved make and quality in sizes 25mm x 25mm, 25mm x 50mm, and 50mm x 50mm, etc of minimum 1.2mm thickness or as per approved structural requirement, including vertical studs, horizontal runners, perimeter framing, intermediate members at required spacing (400–600mm c/c or as per drawings), securely fixed to floor, ceiling, walls, columns and beams using suitable cleats, brackets, anchor fasteners, dash fasteners and self-drilling screws, including provision for electrical and plumbing services within the framework, complete with all necessary accessories, hardware, labour, tools, tackles, scaffolding, wastage, transportation and incidental works, finished true to line and level, ready to receive cladding boards, complete in all respects as per drawings and site instructions. |
| 10 | Providing & fixing in position single Leaf Door in main kitchen made up of 48mm thick branded fire rated flush door shutter of approved make & thickness, back side finished with laminate and front side finished with venner. Providing & fixing 700mm X 200mm glass Vision panel and 12mm thk lipping all around, including of 950mm X 300mm SS push plate and 300mm high SS kick plate, including P/F of Door frame made out of first class seasoned Teakwood with PU polish finish. Size of the frame approximate 175mm wide X 50mm thick. Cost of applicable hardware's such as s/s Heavy duty floor spring or door closer, handles, hinges/ lock and any other hardware etc required to complete the related works as per design & detail, including lead, lift upto floor three level complete. (Purchase price of venner considered as Rs.180 per sqft excluding GST, Purchase price of door closer considered as Rs.4500 each excluding GST, Purchase price of handle considered as Rs.2500 each per sqft excluding GST) Referance drawing no: CPL44, CPL 43, CPL44, CPL44A, CPL45. |
| 11 | Providing & fixing in position single Leaf aluminium louvered door of 50mm thick shutter of approved make & thickness, including P/F of Door frame made out of granite. Size of the frame approximate 175mm wide X 20mm thick. Applicable hardware's such as handles, hinges/ lock and any other hardware etc required to complete the related works as per site engineer instruction, including lead, lift upto floor three level complete. Door size: 900 x 2400mm, Basic cost of laminate is 500 Rs per Sqm, Door accesories: 1 handle with hinges and dead lock.Location: Electrical room door (D5)Referance drawing no: CPL43 |
| 12 | Providing & fixing in position single Leaf sliding Door for physically challeged made up of 48mm thick branded fire rated flush door shutter of approved make & thickness, both side finished with veneer and clear PU polish, including P/F of pelmet for sliding mechanism made out of first class Teakwood with PU polish finish, including lead, lift upto floor three level complete. Applicable hardware's such as s/s conceal door closer, handles, hinges/ lock and any other hardware etc required to complete the related works as per design & detail. Elevational area of the opening will be measured. |
| 13 | Providing kota stone flooring using slab or prepolished tile of available size over suitable tile heavy duty adhesive and spacer gaps filled with epoxy with pigment to match the shade of the slab, including rubbing and polishing, including lead, lift upto floor three level complete as directed by engineer-in-charge. Dado using same material upto height of 30cm. Kota stone thickness 20mm. |
| 14 | Providing and laying machine cut, mirror polished Marble stone (18-20mm thick) flooring, in required design (in geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of white cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, or suitable adhesive including pointing with white cement slurry admixed with pigment or joint epoxy as per manufacturer specification to match marble shade, including rubbing, curing and polishing etc. all including lead, lift upto floor three level complete as specified and as directed by the Engineer-in-Charge. Agency shall consider cost of rubbing stone of various numbers, polishing epoxy of approved make, cost of skilled labour and protection of finished surface using sheets till hand over. Elevational area of the opening will be measured. (Purchase price of natural marble considered as Rs.650 per sqft excluding GST) |
| 15 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone (16-18mm thick) work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick white cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm or suitable adhesive including pointing with white cement slurry admixed with pigment or joint epoxy as per manufacturer specification of matching shade including rubbing, curing, polishing etc. all including lead, lift upto floor three level complete as per Architectural drawings, and as directed by the Engineer-in-Charge. Agency shall consider cost of rubbing stone of various numbers, polishing epoxy of approved make, cost of skilled labour and protection of finished surface using sheets till hand over. (Purchase price of natural marble considered as Rs.650 per sqft excluding GST) |
| 16 | Providing and laying machine cut, mirror polished artificial manmade composite Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over suitable heavy duty adhesive etc. all including lead, lift upto floor three level complete as specified and as directed by the Engineer-in-Charge. 18 mm thick composite Marble stone slab. (Purchase price of natural marble considered as Rs.800 per sqft excluding GST) |
| 17 | Providing and fixing Ist quality vitrified glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in any colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over suitable adhesive and jointing with epoxy of matching shade complete as per manufacturer specification. (Purchase price of vitrified tile considered as Rs.60 per sqft excluding GST) |
| 18 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all including lead, lift upto floor three level complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board |
| 19 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100 ms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 20 | Providing and fixing curved false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all including lead, lift upto floor three level complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Designer curve ceiling Dining area (ceiling height 3200mm) |
| 21 | Providing and fixing 12mm thick oak wood planks on ceiling without warpping/ bend etc. over 18mm thick BWP 710 fire rated plywood with aluminium framework (frame paid extra) handing from true ceiling or truss. Oak wood shall be finished with PU polish. Rate quoted should be including cost of 18mm plywood, polish, all hardware fixture, fittings, and labour for electrical & IT fixtures, scaffolding, floor covering, masking tape and cleaning the area all complete as per drawing, design & manufactures specification all complete. Surface area of the ceiling will be measured. (Purchase price of Oak wood considered as Rs.5000 per cubic ft excluding GST) |
| 22 | Providing & fixing Access panel of Size specified below with - 1. Outer aluminium frame - thickness : 1.5mm ( plus 0.2mm thick powder coating) Material : ENAW6063. 2. Inner Aluminium frame - thickness: 1.5mm (plus 0.2mm thick powder coating) Material : ENAW6063. 3. Corner fittings, inner frame - material: Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 4. Corner fittings, outer frame - material: Hot dipped galvanized steel plate Thickness 2.0mm, with zinc Coating of 200g. 5. 12mm plasterboard of approved make , Type: moisture resistant ( MR) in green plasterboard liner. 6.Screw ( self - drilling black phosphate ) - Material: mild steel C1018 - 1022. 7. Sealing strip, width, thickness - width: 9.0mm, thickness: 4.0mm. 8. Snap Lock ( spring catch/ catch lock ) - Type of lock: touch latch, Material of lock: plastic ABS, cold rolled steelQ235. 9. Hinge - Thickness : 4.0mm, Length: 82 mm; Material: SS2172 ( cold drawn steel wire ). 10. Powder coating - Color: white, RAL 9010 or as per Approved shade. The rate inclusive of Material, Labour, Installation , providing & removing necessary Scaffolding, making cut out for electrical, cove lights & switches etc., including lead, lift upto floor three level complete at all levels as per the Detailed drawings & As per standards, specification and directed by the Engineer-incharge. Size 600x1200mm. |
| 23 | Providing and cladding of marble wall existing wall/ platform cladding for counters, etc. on adhesive in proper line and level including epoxy resin, joints, filling joints with, cleaning, rubbing, complete. Scope includes laying of floor protective cover on the wall and removing of the same when directed along with supply of all necessary materials, labour, tools and tackles complete as per Specification, Drawings and as per the direction of the engineer in charge, Including Polishing. Agency shall consider cost of rubbing stone of various numbers, polishing epoxy of approved make, cost of skilled labour and protection of finished surface using sheets till hand over, including lead, lift upto floor three level complete. (Purchase price of natural marble considered as Rs.1250 per sqft excluding GST) |
| 24 | Providing & laying of wool blend carpet/ matting on existing tile as per design and drawing and directed by engineer incharge etc. complete. Agency shall consider cost of adesive, cost of skilled labour and protection of finished surface using sheets till hand over, including lead, lift upto floor three level complete.(Purchase price of carpet considered as Rs.250 per sqft excluding GST) |
| 25 | Providing & laying of 100mm high tile for marble skirting with bedding of appropriate approved make adhesive & colour joint filler inclusive of making all groove/ chamfering/ rounding/ epoxy resin, hole where ever required, in proper line and level in all direction, polishing/finishing/cleaning etc. including lead, lift upto floor three level including lead, lift upto floor three level complete as per detail drawing, specification and as directed by engineer in charge. (Purchase price of natural marble considered as Rs.650 per sqft excluding GST) |
| 26 | Providing and constructing marble step as per drawings. includes of epoxy resin, making all groove/ chamfering/ rounding/ hole where ever required, in proper line and level in all direction, polishing/finishing etc. including lead, lift upto floor three level complete as per detail drawing, specification and as directed by engineer in charge. Size - 300mm wide x 2200mm length x 150mm height (Purchase price of natural marble considered as Rs.650 per sqft excluding GST) |
| 27 | Providing and constructing marble sill & jamb for live kitchen as per drawings in Display kitchen marble frame/ border/ Sill & Jamb. Inclusive of epoxy grout, making all groove/ chamfering/ rounding/ hole where ever required, in proper line and level in all direction, polishing/finishing etc. including lead, lift upto floor three level complete as per detail drawing, specification and as directed by engineer in charge. 250mm Wide Ledge - Marble. (Purchase price of natural marble considered as Rs.650 per sqft excluding GST) |
| 28 | Providing and fixing of decorative wall tiles on exsting low height wall of Live kitchen counter, which includes epoxy grout-approved make where ever required, joint filler epoxy grout of approved make and colour, in proper line and level in all direction, at all height with lead and lift, polishing/ inishing/ cleaning etc as per design, drawing and directed by engineer in charge etc. all including lead, lift upto floor three level complete. (Purchase price of decorative tiles considered as Rs.350 per sqft excluding GST) |
| 29 | Providing and fixing of marble on exsting low height wall of Live kitchen counter, which includes epoxy grout-approved make where ever required, joint filler epoxy grout of approved make and colour, in proper line and level in all direction, at all height with lead and lift, polishing/ inishing/ cleaning etc as per design, drawing and directed by engineer in charge etc. all complete. (Purchase price of marble considered as Rs.1450 per sqft excluding GST) |
| 30 | Providing and fixing of clay brick wall tiles 25-30mm Thk which includes-laticrete epoxy grout, and clear laquor coating for proction approved make of adhesive like bal Endura or equivalent adhesive, where ever required, joint filler epoxy grout of approved make and colour, in proper line and level in all direction, at all height with lead and lift, polishing/finishing/cleaning etc as per design, drawing and directed by engineer in charge etc. all including lead, lift upto floor three level complete. (Purchase price of clay considered as Rs.175 per sqft excluding GST) |
| 31 | Providing and fixing of 304 grade 3mm thick SS Corner guard (30mm x 30mm, mat finished as per approved sample) fixing with conceal tile on each corner of the kitchen's wall before cladding of tiles, so that the corner may be protected from the damages including lead, lift upto floor three level complete in proper line & level and site engineer's instruction. (height upto 2.40 meter) (30mm x30mm box section built before wall tile fixing) |
| 32 | Providing and fixing of 6-8 mm thick and 18mm height Antique brass floor inlay fixing with thread screws on each corner of the kitchen's wall before cladding of tiles, so that the corner may be protected from the damages. including lead, lift upto floor three level complete. in proper line & level and site engineer's instruction. (Purchase price of clay considered as Rs.250per rft excluding GST) |
| 33 | Providing and fixing of 10 mm thk. fire rated glass partitions with required patch fittings of approved make, height upto 900mm including all necessary required framework, fireproof seal, groove, required all hardware fitting with required approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all including lead, lift upto floor three level complete. (10mm EI/EW certified)) |
| 34 | Providing and applying Plaster of Paris punning/ Gypsum of average thickness 12-18mm to existing wall surfaces prepare the wall for paint/ wall covering in true level and plumb complete as per design and drawing cleaning the surface properly with sand paper, filling cracks/holes with plaster of Paris. Rate include cost for making grooves up to 12mm thick if required in horizontal or vertical direction near doors, windows, skirting, floor covering, masking tape and cleaning the area all including lead, lift upto floor three level complete as per drawing, design & manufactures specification. |
| 35 | Providing and fixing of tile flooring for carpet area which includes- epoxy grout, approved make of adhesive, where ever required, joint filler epoxy grout of approved make and colour, in proper line and level in all direction, at all height with lead and lift, polishing/ finishing/ cleaning etc as per design, drawing and directed by engineer in charge etc. all complete. (Purchase price of tiles considered as Rs.45 per sqft excluding GST) |
| 36 | Providing & applying two or more coats till an even finish is obtained using premium acrylic emulsion of approved paint on exposed surface on ceiling and walls including scraping, primer , filling with putty etc.including lead, lift upto floor three level complete with final coat no brush mark to be visible after painting colour shade as specified. |
| 37 | Providing & applying approved texture paint on exposed surface on ceiling including scraping, primer, filling with putty etc. complete with final coat no brush mark to be visible after painting colour shade as specified including lead, lift upto floor three level complete. (including base preparation and texture with base & top coat etc.) (Purchase price of texture paint considered as Rs.150 per sqft excluding GST) |
| 38 | Providing & applying of approved texture paint on walls including scraping, primer , filling with putty etc. complete with final coat no brush mark to be visible after painting colour shade as specified including lead, lift upto floor three level complete. (Purchase price of texture paint considered as Rs.175 per sqft excluding GST) |
| 39 | Providing & applying two or more coats of fire rated paint (Fire Sprinkler paint) as per standard on exposed surface on metal including removing of old paint etc. including lead, lift upto floor three level complete with final coat no brush mark to be visible after painting colour shade as specified. |
| 40 | Providing and applying PU (Polyurethane) paint finish for metal surfaces in 2 tone of approved make and shade on prepared surface, including thorough surface preparation by cleaning, filling dents and imperfections with approved putty, complete sanding with emery paper to achieve smooth and even surface, application of suitable sealer where required, followed by one coat of PU-compatible primer, intermediate sanding after primer coat, and application of two or more coats of PU paint (matt / satin / gloss as specified) using spray method to achieve uniform, smooth and scratch-resistant finish, including all materials, labour, masking, protection of adjacent surfaces, scaffolding, tools and tackles, including lead, lift upto floor three level complete in all respects as per manufacturer’s specifications and site. |
| 41 | Providing and applying PU (Polyurethane) paint finish of loung egrid wall napproved make and shade on prepared surface, including thorough surface preparation by cleaning, filling dents and imperfections with approved putty, complete sanding with emery paper to achieve smooth and even surface, application of suitable sealer where required, followed by one coat of PU-compatible primer, intermediate sanding after primer coat, and application of two or more coats of PU paint (matt / satin / gloss as specified) using spray method to achieve uniform, smooth and scratch-resistant finish, including all materials, labour, masking, protection of adjacent surfaces, scaffolding, tools and tackles, including lead, lift upto floor three level complete in all respects as per manufacturer’s specifications and site. |
| 42 | Providing, making and fixing of partition using 12mm thk BWP plywood complying IS 710 and fire rating with aluminium framework (aluminium frame cost considered seperatly) strong enogh to received marble. Including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. |
| 43 | Providing, making and fixing of 6-8mm thk fluted oak wood cladding on existing plywood paneling finished wtih approved polish/ PU with all necessary required framing (aluminium frame cost considered seperatly) including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Purchase price of Oak wood considered as Rs.5000 per cubic ft excluding GST) |
| 44 | Providing, making and fixing of 50mm wide oak wood molding having 35mm half round wooden caps finished with approved polish/ PU with all necessary required framing (aluminium frame cost considered seperatly) including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Purchase price of Oak wood considered as Rs.5000 per cubic ft excluding GST) |
| 45 | Providing, making and fixing of 50mm wide oak wood edge molding (around entrance flutted paneling) finished wtih approved polish/ PU with all necessary required framing (aluminium frame cost considered seperatly) including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Purchase price of Oak wood considered as Rs.5000 per cubic ft excluding GST) Reference drawing CPL25 |
| 46 | Providing, making and fixing of 200mm wide HDMR molding (around entrance flutted paneling at ceiling) with all necessary required framing (aluminium frame cost considered seperatly) including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Excluding paint) (Purchase price of HDMR 19mm thick considered as Rs.140 per sqft excluding GST) |
| 47 | Providing, making and fixing of lasercut 18mm thk HDMR paneling Lounge area wall with all necessary required framing (aluminium frame cost considered seperatly), grooved/ pattern as per approved design, fixed with approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete including PU polishing. (Purchase price of HDMR 18mm thick considered as Rs.180 per sqft excluding GST) |
| 48 | Providing, making and fixing of lasercut 25mm thk HDMR artwork fixed on exisitng paneling with all necessary required framing including aluminium/ wooden framework, grooved/ pattern as per approved design, fixed with approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Purchase price of HDMR 25mm thick considered as Rs.210 per sqft excluding GST) |
| 49 | Providing, making and fixing of lasercut 18mm thk HDMR paneling with all necessary required framing (aluminium frame cost considered seperatly), grooved/ pattern as per approved design, fixed with approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. (Excluding Wall Panelling which is covered above in carpentry point 1b)(Purchase price of HDMR 18mm thick considered as Rs.210 per sqft excluding GST) Reference drawing CPL25 |
| 50 | Providing, making and fixing of fishskin pattern made up of 12mm thk pinewood planks fixed on top of each other same as detail drawing. The surface to be scrap and smooth to receive the stain and clear PU polish including all complete finish. The paneling with all necessary required framing including lasercuting/ grooved/ pattern as per approved design, fixed with approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. size of one piece- 150mm wide and thickness-12mm. (Purchase price of pine wood thick considered as Rs.3120 per sqm excluding GST) |
| 51 | Providing, making and fixing of 2mm thk lasercut SS screen/ Jali in curve shape fixed on 20 x 40mm SS box section all finished in antique brass pvd coating, fixed on exsiting marble flooring with required base plate, vertical and horizontal support, all hardware, welding, grinding, SS bidding, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. Referance drawing no: CPL28,29,30,31 |
| 52 | Providing, making and fixing of 18mm thk BWP 710 plywood bulkhead Live kitchen bulkhead and Metal Screen with Shelf of size of 600 high and 450mm wide including shelf with required aluminium framework (aluminium framework consdiered seperatly) finished with apporved wallpaper. the unit to have metal screen made up of 20 x 20mm SS box section finished in antique brass pvd coating having intermediate vertical and horizontal member @ every 450mm/600mm fixed on existing wall. the screen bottom to have 350m wide 25mm thk HDMR shelf finished PU paint with cove lighting detail. the screen to fixed on exsiting wall/ ceiling with required base plate, vertical and horizontal support, all hardware, welding, grinding, SS bidding, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete.Referance drawing no: CPL39 |
| 53 | Providing, making and fixing with approved veneer of thickness not less than 3.5mm from all 4 side and center to have 200mm X 25mm deep niche finished in SS Pvd coating sheet in C shape. including all hardware, welding, grinding, SS bidding, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing and site engineer instruction all complete. Base plywood cladding will be measured in respective item. (Purchase price of veneer is considered as Rs.210 per sqft excluding GST)Referance drawing no: CPL36 |
| 54 | Providing and fixing of 50mm thk. Bar counter made out of 19mm thk approved make branded fire rated ply. Apron to be cladded with app. leatherette & 15mmx 6mm SS brass pvd coating railing finished in anqtiuq brass railing to be fixed with bamboo cane as per detail with necessary ms barcket. 38mm DIA SS pvd coated foot rail to be fixed on the floor. Top finish Marble. Top service Counter Ply Base with Neccesary Support to receive the marble- 600mm wide. Front Elevation (apron) to be to be made out of 12mm thk approved make nd cladded with app. leatherette with upholstery and form & with necessary hardware as per design finished from outside. Provision for indirect lighting to be made under the counter. 15mm x 6mm SS anqtiuq PVD coated railing as per design all round the bar having bamboo cane as per detail. 750mm Flap door for bar area entry finished same as counter appron. 150 mm high SS pvd coated skirting. 38mm DIA SS antique pvd coating foot rail fixed on floor with vertical and horizontal support. Referance drawing no: CPL32 |
| 55 | Providing and fixing of 300 mm deep bar Display unit having 20 x 20mm SS box section framework finished in antique pvd coating. the unit to have 8mm thk toughtned sandwich fabric glass shelf @every 350mm c/c distance on multiple levels as per design with required base plate, vertical and horizontal support, all hardware, welding, grinding, SS bidding, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. over all Unit/ framework with Toughned glasss shelf -10mm 4000 x 1500mm. Referance drawing no: CPL33 |
| 56 | Providing and fixing ofwith 18mm thick fire rated BWP 710 plywood verticals finished with laminate , counter having 4 nos. of open able shutters (may change as per design) on front side of the unit. Shutters & all the visible part to be finished with Laminate, counter's internal part to be finished with light walnut laminate (selected make, basic cost INR. 2500.00/ sheet) and 100mm SS skirting. Rate inclusive of all necessary hardware fittings - like hinges, draw telescopic channels, cup board lock, decorative antique bolt handle, wire managers, etc. (approved & branded make) & necessary cut out for services requirements. Counter having 100 mm high kota skirting .Complete as per architectural detail drawing & site engineer's instruction. 3500+4000mm x 600mmx 900mm height |
| 57 | Providing and fixing of washbale fabric wall covering for bar counter back wall as per custom design pattern with installtion all complete including required framework as per design. (Purchase price of fabric considered as Rs.2500 per sqm excluding GST) |
| 58 | Providing and fixing of clay pot installation above bar counter from ceiling having 20 x 20mm SS pvd coated framework in arch shape for support in 3 layers inclduing the SS string to hang the pots as per custom design pattern with installtion all complete. SS pvd framework with suspention kit. Clay pot with required paint finish. Measurement will be in numbers of clay pots |
| 59 | Providing and fixing Hostess desk made out of approved make branded fire rated Ply, IS 710 BWP, finished with flex stone from fonrt and top internal side Desk to have 4 no drawers of ht 250mm, finished with app. laminate inside with inbuilt recessed handles. lower portion to have 4 number plywood openable shutter with laminate finish and one openable sliding trolly for printer of height 400mm. the unit to have 300mm metalic base made out of plywood and SS pvd coated sheet. rate including all necessary required framing including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. 3000mm X 600mm deep x 1000MM HIGH. Referance drawing no: CPL24 |
| 60 | Providing and fixing Stainless Steel (SS) guard rail for Reception desk fabricated from SS 304 grade with brass shade pvd finish, comprising vertical posts of minimum 50mm dia, horizontal members/handrails of 38mm dia pipe, including intermediate balusters or horizontal rails as per design, complete with base plates, cover plates, brackets, connectors, bends, welding, grinding, polishing and finishing to approved profile, securely anchored to RCC slab, using suitable anchor fasteners and chemical anchors, including all cutting, drilling, alignment, levelling, scaffolding, labour, tools, tackles, transportation and incidental works, finished smooth with all joints neatly ground and polished, complete in all respects as per drawings and site instructions.Referance drawing no: CPL24 |
| 61 | Providing and making of 450mm wide Library unit made up of 18mm thk HDMR board shelf finished with duco paint and vertical main support member made up of oak wood in round shape multilayered ball finished with Pu paint. The shutters to be provided with all required hardware, adhesive complete in all respect. Size/ Dimenison: 3000 x 450 x 2800 HT (Purchase price of oak wood considered as Rs.5000 per cubic ft excluding GST) Referance drawing no: CPL26 |
| 62 | Providing and making of 750mm wide buffet counters made of 18mm thk BWP 710 plywood to receive the marble. The unit to have 8 number openable shelf (niche). the unit to have required cutout for bainmaries. The shutters to be provided with fittings such as hinges, finger pull handle; ball catch, lock etc. complete in all respect. 150 mm high SS pvd coated skirting. The rates for the shelves to be included as per design and details. Size/ Dimenison: 2000 x 750 x 900 HT Referance drawing no: CPL39 |
| 63 | Providing and making of 750mm wide and 900 high buffet counters made of 18mm thk BWP 710 plywood to receive the marble. (marble item and installtion considered as seperate item) The unit to have 8 number open shelf (niche) finished with veneer and clear PU paint. the unit to have 25mm x 6mm thk SS pvd coated inlay inbetween the marble. the unit to have required cutout for bainmaries electrical sockets. complete in all respect. The rates for the shelves to be included as per design and details. including 150 mm high SS pvd coated skirting to all periphery of counter. Size/Dimension: 9000 x 750 x 900 HT Referance drawing no: CPL40. |
| 64 | Providing and fixing storage below counter made up in 18mm thk BWP 710 plywood finished with laminate from all sides. The storage under the Counter should be provided with Openable Shutters finished with 25mm thl plwood laminate finish with wooden molding on all 4 sides of each shutter. The shutters to be provided with fittings such as hinges, handles, ball catch, locks etc. complete in all respect. The rates for the Shutters and reuired cut out to fix the washbasin to be included. as per design and details. Location: Male & female washroom. Size/ Dimension: 600mm W X 450mm H. Referance drawing no: CPL37 |
| 65 | Providing, making and fixing mirror of 20 x 20mm SS pvd coated framework all around havning pluwood backing with 5mm clear mirror fixed on the exisitng wall with all necessary required framing as per design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. |
| 66 | Providing, making and fixing of 100mm thk partition using 18mm thk biosn board partition above kitchen wall with aluminium framework (aluminium frame cost considered seperatly) . all necessary required framing including grooved/ pattern as per approved design, approved make adhesive and fasteners, cutting/ chamfering/ groove/rounding wherever required, at all height with lead and lift, finishing, cleaning as per design and drawing etc. all complete. |
| 67 | Providing and fixing marble sandwich urinal partitions fabricated from approved marble of minimum 18–20mm thickness, machine cut and mirror polished on all exposed faces and edges, with smooth rounded corners, fixed vertically between urinals as per approved size and drawing, including necessary stainless steel brackets/clamps, base supports, screws, fasteners and adhesive for secure fixing to wall and floor, complete with edge polishing, sealing of joints with matching sealant, proper alignment and levelling, including all cutting, drilling, finishing, labour, tools, transportation and incidental works, complete in all respects as per site instructions. Size/ Dimension: 450mm L X 40mm thk X 750mm H (Purchase price of stone considered as Rs.650 per sqft excluding GST) |
| 68 | Providing Pest Control & Anti-termite treatment by appointing a specialized agency as per the specifications mentioned by the Bureau of Indian Standard & Agencies specification ( Whichever is higher ) for General Civil , Plumbing / Drainage & timber / Carpentry works , Gypsum related work including 5 Years guarantee under suitable undertaking on stamp paper etc complete as directed . (Mode of Measurement to be on carpet area of floor & not the area of surface treated) |
| 69 | Providing and applying polyurethane (PU) based waterproofing system over prepared surfaces, including thorough surface cleaning, crack sealing, and application of suitable PU primer as recommended by the manufacturer. The waterproofing membrane shall be applied in two or more coats to achieve the specified dry film thickness, complete with reinforcement fabric at corners, joints, and cracks if required. The work shall include all materials, labour, tools, curing, and protection, complete as per manufacturer’s specifications and engineer’s approval. After all there should be a water pond testing to be done for water tightness & rectifications of defects if any. Complete with 10 years performance guarantee with client's satisfaction. Entire process to be done under guideline & supervision of appointed engineering team. Loation: for Kitchen, Bar and Washrooms floors and walls up to 1000mm |
| 70 | Providing and applying expansion joint treatment using IS-12118 compliant two-part polysulphide sealant with compatible primer and closed cell PE backer rod, including cleaning and preparation of joint surfaces, placement of backer rod to required depth, masking, application and tooling of sealant to specified joint width and depth, removal of masking tape, finishing and curing complete as per manufacturer’s specifications and as directed by the Engineer-in-Charge. |
| 71 | Providing and applying expansion joint treatment including surface and edge preparation ,applying masking tape to prevent discolouration or application on unwanted Areas and cover the joint,mixing of epoxy adhesive premix each component individually in a proportion of 2 parts of component A to 1 part of component B by wt. and mix for about 3 minutes with a low speed drill or paddle until get a uniform colour. Apply theapproved adhesive on both sides of the joint. Place the high performance, Polyol Phin based membrane system 2mm thickness and 40cm width/ strip in position on to the epoxy adhesive and using a hard roller force the tape into the epoxy. Apply a top layer of adhesive on the membrane / strip. The adhesive should extend upto 5-10mm beyond the edge of the sheeting as per site condition. Remove the masking tape.Overlapping joints shall be sealed with PU Sealant. Fix the cover plate (0.4mm or 0.6mm aluminum sheet) fixing on one side of the joint and keeping the other end free for protecting the membrane. The top layer of the backup board shall be cut and this gap then again be sealed with a flexible, 1 part polyurethane sealant .The installation and the setting instructions should be strictly followed as per the manufacturers recommendations and as directed by Engineer in Charge .The rate shall be inclusive of cost of all materials, transportation, lead, lift, labour charges, cleaning and clearing the debris from all levels and disposing etc complete, as specified by the Engineer-In-Charge. (The above work shall be carriedout by an agency having sufficient experience in expansion joint treatment and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.) |
| 72 | Providing & Fixing of aluminium Floor to Floor Flat Model, for 50 mm Expansion Joints Aluminum Covers Profiles, having a Hard Wearing, Maintenance Free, long Lasting design having Smooth Surface. The Exp. Joint Covers should have large movement capacity +/- 10mm. The design of the Exp. Joint Cover System should be such that it should avoid any accumulation of dirt. The Exp. Joint Cover should have an Semitic and non-bump with minimum expose surface. The surface of the system should be in the Mill finish. The total Visible width of the profile should not be more than 37 mm (+/- 5 mm).The system should be capable of heavy load capacity upto 600 KN of lorry tier load. |
| 73 | Chasing in existing ACC/ siphorex/concrete wall, up to 200mm wide and 75mm deep, for installation of A.C. copper pipes/drain pipes as required and making good of chases with cement plaster/POP ready for application of paint including filling with Jali and with proper levelling as per site requirement |
| 74 | Making punctures in existing ACC/siphorex/concrete wall block. Up to 450mm DIA for passing A.C. copper pipes/HVAC DUCT/ drain pipes as required and making good the same with cement plaster/POP. |
| 75 | Core cuts in mother slab for drain pipes 200mm dia as per required and making good the same with cement plaster and waterproofing before slab waterproofing and kobah. |
| 76 | Removing Debris out of site included loading, unloading & shifting as per statutory rules and regulations upto lead of 5kms |
| 77 | Providing and fixing flex board out including flex printing and installation. |
| 78 | Demolision of exisitng floor tiles /stone along with the cement motar and chipping to remove all the loose material from the floor. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 79 | Demolision of raised floor 300-450 mm height aloong with the Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 80 | Demolision of wall 600 mm along with the plaster & Tiles /Panneling. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 81 | Demolision of wall 250 mm along with the plaster & Tiles /Panneling. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 82 | Removing of door shutters & door frames along with hardwares. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 83 | Removing of all the fixed carpentry panneling/unit/cladding along with hardwares. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 84 | Demolision of exisitng gypsum/ply false ceiling along with the frames and supports. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 85 | Removing of all the fixed and openable glass door and partition along with hardwares. Trasporting the debris to loading gate and loading it in the vehicle, and disposing it to designated area from third floor level uoto a lead of 5km as directed by the engineer in charge. |
| 86 | Providing and fixing of 20mm Dia - CPVC Pipes conforming and CPVC solvent weld fittings like elbows, tees, couplers, brass threaded adaptors, insert ring etc. suitable for (domestic and flushing) cold applications rated, concealed piping within wall / floor including jointing with fittings using solvent cement, brass threaded end fittings for making connection to fixtures. The work shall also include chasing the walls with machine wherever required for concealed piping and making good the same after laying of pipes & necessary pressure testing Chasing finishing shall be done with 1:1 cement mixed mortar, restore the same original condition for internal and shaft piping, including necessary hot deep galvanised supports vertical / horizontal, as per direction of Site incharge direction. [The rate shall include supply of S.S.screws and nut bolts etc.chasing in walls done by machine] (For Domestic and Flushing water-Toilet internal) (Pipe shall be tested with 1.5 times working pressure as covered in specifications) |
| 87 | Providing and fixing of 25mm Dia- CPVC Pipes conforming and CPVC solvent weld fittings like elbows, tees, couplers, brass threaded adaptors, insert ring etc. suitable for (domestic and flushing) cold applications rated, concealed piping within wall / floor including jointing with fittings using solvent cement, brass threaded end fittings for making connection to fixtures. The work shall also include chasing the walls with machine wherever required for concealed piping and making good the same after laying of pipes & necessary pressure testing Chasing finishing shall be done with 1:1 cement mixed mortar, restore the same original condition for internal and shaft piping, including necessary hot deep galvanised supports vertical / horizontal, as per direction of Site incharge direction. [The rate shall include supply of S.S.screws and nut bolts etc.chasing in walls done by machine] (For Domestic and Flushing water-Toilet internal) (Pipe shall be tested with 1.5 times working pressure as covered in specifications) |
| 88 | Providing and fixing of 32mm Dia- CPVC Pipes conforming and CPVC solvent weld fittings like elbows, tees, couplers, brass threaded adaptors, insert ring etc. suitable for (domestic and flushing) cold applications rated, concealed piping within wall / floor including jointing with fittings using solvent cement, brass threaded end fittings for making connection to fixtures. The work shall also include chasing the walls with machine wherever required for concealed piping and making good the same after laying of pipes & necessary pressure testing Chasing finishing shall be done with 1:1 cement mixed mortar, restore the same original condition for internal and shaft piping, including necessary hot deep galvanised supports vertical / horizontal, as per direction of Site incharge direction. [The rate shall include supply of S.S.screws and nut bolts etc.chasing in walls done by machine] (For Domestic and Flushing water-Toilet internal) (Pipe shall be tested with 1.5 times working pressure as covered in specifications) |
| 89 | Providing & Fixing of gun metal heavy 20mm Dia Ball Valves-PN-16 (approved makes as covered in specification) screwed type for water system of the following diameters. Valve shall have with unions. |
| 90 | Providing & Fixing of gun metal heavy 25mm Dia Ball Valves-PN-16 (approved makes as covered in specification) screwed type for water system of the following diameters. Valve shall have with unions. |
| 91 | Providing & Fixing of gun metal heavy 32mm Dia Ball Valves-PN-16 (approved makes as covered in specification) screwed type for water system of the following diameters. Valve shall have with unions. |
| 92 | Providing ,fixing, testing and commissioning online water meter including providing & fixing matching with required accessories 16Kgs/Sq.cm)- 32 mm Dia incoming line. |
| 93 | Supply, installation,testing & commissioning of 5L Capacity Storage Type Electric Hot Water Generator of mentioned capacity, suitable for 3 KG/cm2 pressure, Wall Mounted / Floor standing type, with Auto Shut-off Thermostat, along with isoltion Valves, Air Release valve, SS flexible connections andall other std accessories. Note- Geyser order shall be placed as per site feasibility. Electrical geyser or Gas geyser to be checked at site prior to proceed. |
| 94 | Supply, installation,testing & commissioning of 20L Capacity Storage Type Electric Hot Water Generator of mentioned capacity, suitable for 3 KG/cm2 pressure, Wall Mounted / Floor standing type, with Auto Shut-off Thermostat, along with isoltion Valves, Air Release valve, SS flexible connections andall other std accessories. Note- Geyser order shall be placed as per site feasibility. Electrical geyser or Gas geyser to be checked at site prior to proceed. |
| 95 | Supply, installation, testing and commissioning of oil & grease separator of approved make. This shall have a compact one-piece consturction in stainless, with inbuilt flow reducer, flexible coupling, drain valve and a sloped bottom. All inner parts shall be of stainless steel and equipment shall be movable. Above floor/ below counter installation; dimensions L=540mm, W=400mm, H=325mm. Nominal Size: GT40 with inlet dia of 1.5'' & oulet dia of 2\\", with a slit basket and overall capacity of 63 litres. |
| 96 | Providing and fixing of 40mm Dia- UPVC-SWR pipes (TYPE-B-working pressure 6kg/cm2) conforming to including fittings conforming to and agri type pipes above 100 mm dia. conforming to cutting the pipes to required lengths, laying in the position to required grade and level, jointing, supporting with PVC cleat,hot deep galvanised bracket supports,hot deep galvanised nut-bolts, anchor fastners, PVC coated U-clamp, testing and rectifying leakages for piping within vertical shafts / supported on wall / hung below slab etc. with all material & labor complete and as directed. [The Rate shall include supply and fixing of hotdip galvanised bracket nut bolts/ PVC Coated U-Clamp and screws] Vertical line bracket shall be fixed at every 0.8 mtr to 1.00 mtr.] (INTERNAL /VERICAL PIPING-DRAINAGE) |
| 97 | Providing and fixing of 50mm Dia- UPVC-SWR pipes (TYPE-B-working pressure 6kg/cm2) conforming to including fittings conforming to and agri type pipes above 100 mm dia. conforming to cutting the pipes to required lengths, laying in the position to required grade and level, jointing, supporting with PVC cleat,hot deep galvanised bracket supports,hot deep galvanised nut-bolts, anchor fastners, PVC coated U-clamp, testing and rectifying leakages for piping within vertical shafts / supported on wall / hung below slab etc. with all material & labor complete and as directed. [The Rate shall include supply and fixing of hotdip galvanised bracket nut bolts/ PVC Coated U-Clamp and screws] Vertical line bracket shall be fixed at every 0.8 mtr to 1.00 mtr.] (INTERNAL /VERICAL PIPING-DRAINAGE) |
| 98 | Providing and fixing of 65mm Dia- UPVC-SWR pipes (TYPE-B-working pressure 6kg/cm2) conforming to including fittings conforming to and agri type pipes above 100 mm dia. conforming to cutting the pipes to required lengths, laying in the position to required grade and level, jointing, supporting with PVC cleat,hot deep galvanised bracket supports,hot deep galvanised nut-bolts, anchor fastners, PVC coated U-clamp, testing and rectifying leakages for piping within vertical shafts / supported on wall / hung below slab etc. with all material & labor complete and as directed. [The Rate shall include supply and fixing of hotdip galvanised bracket nut bolts/ PVC Coated U-Clamp and screws] Vertical line bracket shall be fixed at every 0.8 mtr to 1.00 mtr.] (INTERNAL /VERICAL PIPING-DRAINAGE) |
| 99 | Providing and fixing of 75mm Dia- UPVC-SWR pipes (TYPE-B-working pressure 6kg/cm2) conforming to including fittings conforming to and agri type pipes above 100 mm dia. conforming to cutting the pipes to required lengths, laying in the position to required grade and level, jointing, supporting with PVC cleat,hot deep galvanised bracket supports,hot deep galvanised nut-bolts, anchor fastners, PVC coated U-clamp, testing and rectifying leakages for piping within vertical shafts / supported on wall / hung below slab etc. with all material & labor complete and as directed. [The Rate shall include supply and fixing of hotdip galvanised bracket nut bolts/ PVC Coated U-Clamp and screws] Vertical line bracket shall be fixed at every 0.8 mtr to 1.00 mtr.] (INTERNAL /VERICAL PIPING-DRAINAGE) |
| 100 | Providing and fixing of 100mm Dia- UPVC-SWR pipes (TYPE-B-working pressure 6kg/cm2) conforming to including fittings conforming to and agri type pipes above 100 mm dia. conforming to cutting the pipes to required lengths, laying in the position to required grade and level, jointing, supporting with PVC cleat,hot deep galvanised bracket supports,hot deep galvanised nut-bolts, anchor fastners, PVC coated U-clamp, testing and rectifying leakages for piping within vertical shafts / supported on wall / hung below slab etc. with all material & labor complete and as directed. [The Rate shall include supply and fixing of hotdip galvanised bracket nut bolts/ PVC Coated U-Clamp and screws] Vertical line bracket shall be fixed at every 0.8 mtr to 1.00 mtr.] (INTERNAL /VERICAL PIPING-DRAINAGE) |
| 101 | Supply, Install CP clean out plug including fixing with necessary consumables with Circular SS Grating with anti cockroach jali Suitable. 110 mm dia |
| 102 | Supply and fixing PVC Multi floor trap (anti cockroach & anti foul smell trap with cup) and with frame and cover (110 mm x 110mm square) P trap of 75mm with boss connection which is water sealed. Including stainless steel gratings of approved make. Outlet fixed on a bed of cement concrete with self-cleansing design with or without vent arm including cutting and making good the walls and floors., complete as per standards, specifications and direction of the Engineer-in-charge |
| 103 | Supply, installing, testing and commissioning of white colour European water closet wall hung mounted water closet with 'P' or 'S' trap, matching colour solid plastic seat and lid with C P brass hinges, rubber buffers, C.I / M.S Brackets, 40 mm diameter flush bend with fittings and clamps, and SS nut Bolt only considered overflow arrangements with specialsand 25 mm dia mosquito proof coupling of approved design, concealed flushing cistern, front operated with cover plate, flush pipe, flush actuator, actuator plate as required. The cost shall include painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all nut and Bolt are SS 304 to be considered all complete as per standards, specifications and direction of the Engineer-incharge. (Purchase price of EWC with seat cover considered as Rs.20000 each per sqft excluding GST) |
| 104 | Providing, fixing and commissioning of concealed flush tank of approved make. The cost shall include painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all nut and Bolt are SS 304 to be considered all complete as per specifications. (Purchase price of concealed tank considered as Rs.4500 each per sqft excluding GST) |
| 105 | Supplying, Installing, testing, and commissioning of approved make 15mm SS/matte finish/ polymer/ powder coated health faucet. Work shall include cost of flexible tube 1.0m long, SS/matte finish crutch, nozzle, angle valve, etc., complete as per specifications and direction of the Engineer-in-charge. All nut and Bolt are SS 304 to be considered. (Purchase price of health faucet considered as Rs.2775 each per sqft excluding GST) |
| 106 | Supplying, installing, testing, and commissioning of countertop/ under counter wash basin. The basin is mounted over granite/ C.I./ M.S Bracket with the following fittings like 32 mm CP brass full thread waste coupling, 32 mm CP brass P trap of casted type with extension pipe, 450 mm long PVC inlet connecting pipes and brass/ SS nuts, 1 Nos 15 mm CP brass angular stop cock with wall flanges with extension pipe, 15mm dia SS/matte finish/matte finish angle cock, flexible inlet connection pipe G.I. expansion bolts etc., complete including silicon sealant. Flow rate 1.5 Lts/min all nut and Bolt are SS 304 to be considered all complete as per standards, specifications and direction of the Engineer-in-charge. (Purchase price of wash basin bowl considered as Rs.25000 each per sqft excluding GST) |
| 107 | Supplying, installing, testing and commissioning of sensor tap for wash basin. Cost shall include angle value, connection tubes, brackets, cutting and making good the wall and floor wherever required, all nut and Bolt to be considered all complete as per specifications and direction of the Engineer-in-charge. (Purchase price of sensor tap including control unit considered as Rs.30000/- each per sqft excluding GST) |
| 108 | Supply, installing, testing and commissioning of faceplate polished chrome. The cost shall include painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including lead and lift charges, all nut and Bolt are SS 304 to be considered all complete as per specifications and direction of the Engineer-in-charge. (Purchase price offaceplate including control unit considered as Rs.7000/- each per sqft excluding GST) |
| 109 | Supplying, installing, testing and commissioning of CP sink long body cock. Cost shall include painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour including including lead, lift upto floor three level, SS/matte finish crutch, nozzle etc., complete. all nut and Bolt are SS 304 to be considered all complete as per specifications. and direction of the Engineer-in-charge. |
| 110 | Supply, installation, testing and commissioning of vitreous china Large Flat Back Urinal patio touchless urinal, water saving of size of approved make with inbuilt Sensor, battery operated,. Work shall include cost of CP Bottle trap, Spreader, Pipe, Dome Coupling etc. connecting the urinal with waste pipe, trap, all nut and bolt are SS 304 including lead, lift upto floor three level complete. Urinal shall have pre and post flush. Purchase price of urinal with sensor & control unit considered as Rs.40000/- each per sqft excluding GST) |
| 111 | Installation testing and commissioning of S.S.Gratings- Making chamber in RCC including internal tiling etc for S.S Grating size, 600mm x 300mm, in 16 swg 25mm x25mm Square Pipe around the Frame and 20mmX 20mm Square pipe in center of frame with SS perforated tray (304 SWR) including lead, lift upto floor three level Complete as per architectural detail drawing & Site Engineer's instruction. |
| 112 | Supplying, drilling, cleaning hole and injecting chemical into a hole of 14-16 dia & depth as per manufacturer specification and supply & fixing GI thread rod of approved make & of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - GI bolt/ steel will be paid under separate subhead. Rate inclusive of Drilling in Blockwork / RCC etc. as per the requirement including lead, lift upto floor three level complete., to the requirement of EIC. Dia 12mm Please Enable Macros to View BoQ information |
| 113 | Supplying, drilling, cleaning hole and injecting chemical into a hole of 14-16 dia & depth as per manufacturer specification and supply & fixing GI thread rod of approved make & of the required diameter subsequently. The chemical should have successfull usage in wet/water saturated concrete/diamond cored holes. The chemical should have approval against creep & corrosion. Fixing methodology to be followed as per manufacturers guidelines. - GI bolt/ steel will be paid under separate subhead. Rate inclusive of Drilling in Blockwork / RCC etc. as per the requirement including lead, lift upto floor three level complete., to the requirement of EIC. Dia 12mm Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
| 8 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
