|
| 1 | Making of RCC foundation of dimesion size- 350 mm x 350 mm x 600mm) with Gr M20 RCC and Fe 415 grade Civil Work:1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size), reinforcement for mounting of Decorative pole and with 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface. |
| 2 | Supplying and laying of 1.1KV grade 4 core × 10sqmm one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make: KEI/ Gloster/ Universal/Polycab |
| 3 | Supplying and laying of 1.1KV grade 4 core × 25sqmm one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make: KEI/ Gloster/ Universal/Polycab |
| 4 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 5 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 6 | SITC of decorative pole shall be made out of Mild Steel tube as per attached drawing. Total height of the pole shall be 3000mm nominal above the ground. The complete pole shall be of 100mm dia x 3.0mm thickness x 3000 mm long. The base plate shall be of dimension dia 250mm and thickness 10mm and joined with the pole by welding joint with the help of stiffeners. A built in service window shall be provided to accommodate a 6 amp SP MCB and 32 amp heavy duty connector for mains connections in the bottom part of the pole as shown in the attached drawing. The decorative pole shall be machined and polished properly to give it a smooth surface. The decorative pole shall be duly pretreated by shot blasting process and coated with high end epoxy primers and top coat in UV ray resistant polyurethane/Polyester coating in approved colour shade. The Coating on the pole shall be baked in oven at required temperature and parameters. The DFT of coating on pole shall be 90 microns (minimum). The coating on pole and bracket shall pass minimum 300 salt spray hours. Wind pressure calculation shall be done as per IS875 for wind speed of 180 km/hr. The contractor has to specify pole manufacturers name and manufacturing facility details in technical bid. The pole manufacturer shall have inhouse facility for pole fabrication consisting of Laser cutting machine, Pole fabrication and Mig welding plant, shot blasting machine, Oven to bake required pole and bracket. The EIC will visit the plant to ascertain the required plant and machinery at manufacturers facility. Make-Homedec Lighting Item Cat No- HL-MSP-241 (3000 MM)/TWINKLE Luminaries CAT No-3 mtr. Luxmax VICTORIA Steel-N (Cast Iron) Pole/Crompton/Philps/Wipro equivalent to specified make SITC of decorative Led Post Top Light shall be made of cast spun & extruded aluminum and shall have Ingress protection of IP65 for optical compartment and Impact Resistance of IK 06 or more. The effective Width & Height of the Led Post Top Light shall be dia 600mm x 440mm respectively. The Led Post Top Light shall be in 60w LED. Translucent Polycarbonate Diffuser shall be fitted in the Led Post Top Light. Integrated suitable BIS approved LED Driver shall be fitted inside the Led. Post Top Light having efficiency >85%, power factor shall be>0.95, THD<=10%, with driver standard voltage withstand range of 100-300V AC and inbuilt surge protection of min 4KV. The Luminaire shall have external surge protection device of 10KV. Led shall be Osram/Seoul/Cree/Bridgelux or equivalent reputed make and shall have luminous efficacy of more than 140 Lm/Watt. System luminous efficacy shall be more than 90 Lm/Watt. The CCT of Led shall be 3000/4000/6000K as required by engineer in charge. The shape and sizes of the Led Post Top Light shall be as per attached drawing. System life of 50,000 burning hours with 70% of initial lumens maintained. The Led Post Top Light shall be machined and polished properly to give it a smooth surface and shall be coated in UV ray resistant Polyurethane/ Polyester coating in approved colour shade. The Coating on the Led Post Top Light shall be baked in oven at required temperature and parameters. The contractor has to specify pole/Luminaire manufacturers name and manufacturing facility details in technical bid. The pole manufacturer shall have in house testing facility for Post Top light luminaire viz- LM-79, IP-65, IK-06. Oven to bake coating required luminaire. The EIC will visit the plant to ascertain the required testing equipments, plant and machinery. Following third party test reports will be required with the material. LM-79,IP-65,IK-06,LM-80 FOR LED,BIS OF DRIVER,BIS OF POST TOP LIGHT Make- Homedec Cat No-HL-2397 (60W led)/LuxMax-PT-232-HZ-P (60W) /Crompton/Philps/Wipro equivalent to specified make |
| 7 | Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 8 | 3 output (1output per phase) and suitable for three phase supply |
| 9 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 10 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 11 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 12 | 4 X 25 sq. mm (25mm) Please Enable Macros to View BoQ information |
