|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Demolishing stone rubble masonry manually/by machanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per directionof Engineer-in-charge: |
| 3 | In cement mortar |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable materialwithin 50 metres lead as per direction of Engineer-in-charge. |
| 5 | 14.6.1 In Cement mortar |
| 6 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in charge. |
| 7 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 11 | 2.8.1 All kinds of soil. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - |
| 13 | All work upto plinth level: |
| 14 | 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 15 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level : |
| 16 | 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 18 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 21 | 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. |
| 22 | 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 23 | 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts.5.9.6 |
| 24 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 25 | 5.20.2 Thermo-Mechanically treated bars. |
| 26 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 27 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 28 | Half brick masonry with 1st class common burnt clay FPS (non-modular) bricks in superstructure above plinth level upto floor V level in |
| 29 | 6.9.1 Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 30 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 31 | 1:4 (1 cement: 4 coarse sand) |
| 32 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 33 | In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 34 | Finishing walls with water proofing cement paint of required shade : |
| 35 | 13.32.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 37 | 13.44.1 Two or more coats on new work Please Enable Macros to View BoQ information |
