Tender For Maintenance & Repair Work At Kanchanpur Market Area From Km 43+050 To Km 43+560 & Km 43+670 To Km 43+935 Of Lalchera - Kanchanpur Via Shivbari Road Section On Nh-44A (New Nh-108) At The Risk And Cost Of Epc Contractor In The State Of Tripura In, Tripura-Tripura
TDR : 54619379
Tender Notice
BOQ
16 Days Left
Tripura
Tripura
Tender For Maintenance & Repair Work At Kanchanpur Market Area From Km 43+050 To Km 43+560 & Km 43+670 To Km 43+935 Of Lalchera - Kanchanpur Via Shivbari Road Section On Nh-44A (New Nh-108) At The Risk And Cost Of Epc Contractor In The State Of Tripura In
Name of Work:- Maintenance & Repair work at kanchanpur market area from Km 43+050 to Km 43+560 & Km 43+670 to km 43+935 of Lalchera – Kanchanpur via Shivbari road section on NH-44A (New NH-108) at the risk and cost of EPC Contractor in the state of Tripura in the FY 2025-26 on item rate basis & work order basis
Sl. No.
Item Description
1
CTSB Providing, laying, spreading and compacting graded stone Aggregte of CTSB specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Technical Specification Clause 403 & Gradation as per MoRT&H Table 400-1 Grade IV.
2
Geotextile Geotextile 120 gsm non woven membrane,100% polyester of thickness 1 to 1.25 mm
3
WMM Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MoRT&H Technical Specification Clause 406.
4
Tack CoatProviding and applying tack coat bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with Hydraulic broom as per MoRT&H Technical Specification Clause 503
5
Prime CoatProviding and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.6 kg/sqm using mechanical means as per MoRT&H Technical Specification Clause 502.
6
Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ min. 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. With Viscosity Graded Bitumen of VG-40. DBM Grade-II
7
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ min. 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. With Viscosity Graded Bitumen of VG-40. BC Grade-II Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
