|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd class deodar wood |
| 2 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) 2nd Deodar wood wood 40 mm thick shutters. |
| 3 | 15 mm cement plaster in single coat on rough side of brick/stone walls for interior plaster up to all floor level i/c arrises internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth in all leads and lifts with finished with cement mortarof mix 1:6 (1 cement: 6 fine sand) on |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (300 x 300 mm) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. Complete as per direction of Engineer-in-charge. 250 x 16mm |
| 7 | Providing and Fixing MS Tower Bolts 150 mm x 10 mm s direction by the Enginner-in-Charge:- |
| 8 | Providing and Fixing MS handles 125 mm as direction by the Enginner-in-Charge: |
| 9 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 10 | Wall painting one or more coats on old work with plastic emulsion of approved brand and manufacture on undecorated wall surfaces including priming coat to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth as required for making the surface including carriage of material within all leads and lifts in all floor levels as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
