|
| 1 | Earthwork in Excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including emoving. spreading or stacking the spoils within a lead of 75m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom bailing out water as required complete. |
| 2 | Brick soling with picked jhama bricks including preparation of bed as necessary, with brick joints properly filled in and packed with powdered earth and including necessary cushion of similar material below the soling (and in between layers when more than one layer is used) complete as per direction |
| 3 | Cement concrete with graded stone ballast (40mm size ) excluding shuttering in ground floor |
| 4 | Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any in ground floor as per relevant IS codes. River Bazree |
| 5 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc initial straightening and removal of loose rust (if necessary) cutting to requisite length hooking and bending yto correct shape placing in proper position and binding with 16 gauge black annealed wire at intersection complete as per drawing and direction. For works in foundation basement and upto roof of ground floor /upto 4m |
| 6 | Hire and labour charge for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns lintels curved or straight including fitting fixing and striking out after completion of works.( upto roof of ground floor) a) 25mm to 30mm thick wooden shuttering as per decision & direction of the Engineer-In- charge |
| 7 | 125mm thick brick work with 1st class bricks in cement mortar (4:1) in ground floor |
| 8 | Plaster(to wall , floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating nosing and drip course, scaffolding/staging where necessary (ground floor) Excluding cost of chipping over concrete surface. |
| 9 | M.S. structural works in colums, beams etcwith simple roled structural members(eg. joints angle, channel sections conforming to IS:226, IS:808 & SP (6) -1964 connected to one another with bracket gusset cleats as per design, direction of Engineer-In charge complete including cutting to requisite size. fabrication with necessary metal arc welding conforming to IS:816-1956 & IS: 9595 using electrodes of approved make and brand conforming to IS: 814-1957 haulage hoisting and erection all complete. The rate includes the cost of rolled steel section consumables such as electrodes gas and hire charges of all toolsand plants and labour required for the work including all incidental charges such as electricity charges, labour insurance charges etc. (payment to be made on the basis of calculated weight of structural tubular members as specified in relevant IS code in finished work. Payment for gusset bracket cleat may be made by adding the actual weight of such items with the weight of finished structural members or 7% weight for finished structural mebers weitghing not less than 22.5kg/m 0r 15% of weight for finished structural members weighing less than 22.5 kg/m may be increased to allow for bracket, cleat, revets, bolts and nuts etc and no separate payment being made for theseitems, as per direction of Engineer-In-charge.. The rates are considered for a height of erection 8m/2nd floor leves from the ground.Add 1.5% extra over the rate for each additional floor or 4m. beyond initial 8m.or part thereof. |
| 10 | Supplying fitting, fixing chain link fencing of approved quality wih RCC posts wooden posts or iron posts by means of galvanised 'C' clips to grid of horizontal stands of galvanised high tensile spring stell wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips bolts and nuts etc |
| 11 | MS gate of jail type as per approved design made of strong M.S. framework intermediate stiffeners and round/square bars or angles. MS sheet (not less than 14 gauge) Gussets cleats etc including necessary riveting bolting Welding, locking and hanging arrangements fitting & fixing complete as per direction of the Engineer-In-charge. In ground floor |
| 12 | Plum concrete work with 40% cement concrete with 30mm down graded stone metal and 60% stone boulder of size 150mm and above placed in position as directed excluding shuttering if any Please Enable Macros to View BoQ information |
