|
| 1 | Construction of Mini CSC (Model 1) @ Direct Purchase Center in Madigai panchayat. |
| 2 | Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for foundation |
| 3 | Supplying and Filling foundation and basement with filling M.Sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 4 | Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. |
| 5 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x21/4\\" including cost and conveyance of all materials to site and all labour charges etc complete (Below basement) |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" including cost and conveyance of all materials to site and all labour charges etc complete (Above Basement) |
| 7 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 8 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. |
| 9 | Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 10 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete. |
| 11 | Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 12 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 13 | Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete |
| 14 | Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete |
| 15 | Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 16 | Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 17 | Supply and fixing of Wood plastic composit door inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Supply and fixing of Wood plastic composit door inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 19 | Cost, supply and fixing of Precast RCC Ring, including cost and labour etc., complete |
| 20 | Cost, supply and fixing of Precast RCC Round slab, including cost and labour etc., complete |
| 21 | Cost, supply and fixing of RCC Cement jolly, including cost and labour etc., complete |
| 22 | Supplying & Fixing in position of Indian type Water closet 580 x 440mm of approved quality including cost and conveance of all etc., complete |
| 23 | Supplying & Fixing in position of European Water closet of approved quality including cost and conveance of all etc., complete |
| 24 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) (SD 25) |
| 25 | Supply and fixing of CFL Bulb |
| 26 | Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 62) |
| 27 | Supplying & Fixing in position of PVC Sintex tank of approved quality including cost and conveance of all etc., complete |
| 28 | Supplying & Fixing in position of 25mm PVC pipe (M-0876) of approved quality including cost and conveance of all etc., complete |
| 29 | Supplying & Fixing in position of 25mm PVC Couplers (Mould) BIS 7834/1975 Part VI (WD-M0111) of approved quality including cost and conveance of all etc., complete |
| 30 | Supplying & Fixing in position of 25mm PVC Equal tee (Mould) BIS 7834/1975 (WD-M0113) of approved quality including cost and conveance of all etc., complete |
| 31 | Supplying & Fixing in position of 25mm PVC Elbow (Mould) BIS 7834/1975 Part VI (WD-M0112) of approved quality including cost and conveance of all etc., complete |
| 32 | Supplying & Fixing in position of 110mm PVC pipe of approved quality including cost and conveance of all etc., complete |
| 33 | Supplying & Fixing in position of 110mm PVC Couplers (Mould) BIS 7834/1975 Part VI (WD-M0111) of approved quality including cost and conveance of all etc., complete |
| 34 | Supplying & Fixing in position of 110mm PVC Elbow (Mould) BIS 7834/1975 Part VI (WD-M0112) of approved quality including cost and conveance of all etc., complete |
| 35 | Supplying & Fixing in position of 110mm PVC Equal tee (Mould) BIS 7834/1975 (WD-M0113) of approved quality including cost and conveance of all etc., complete |
| 36 | Supplying & Fixing in position of 20mm GI Waste Not Tap (WD-M0615) of approved quality including cost and conveance of all etc., complete |
| 37 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
