|
| 1 | Chair CB steel with/with out Arms; FD-75(m) (a) Removing the existing unserviceable broken seat & back frame of Chair CB Steel and supply and fixing new seat as existing made out of Ist class hard wood teak (Tectona Grandis) 1st quality duly painted in teek wood colour and canned as per drawing (Godrej pattern) . Canning hole shall be bored at 12.5 mm centre to centre. Back & Seat shall be fixed to frame with bolts and nuts making required holes to frame and steel tubuler (4 nos nuts and bolts each).Rest all as per drawings and as directed by Engineer -in -charge. |
| 2 | (b) Taking out unserviceable cane from chair CB steel and then cleaning the holes for re canning and supply & re-canning with new half round cane 2/4 mm wide superior quality ISI Marked color as approved by Engr-in-charge. Viewing shall be as per godrej pattern complete All as specifieid in drg and directed by Engr-in-charge |
| 3 | (c) Taking out unserviceable hand rest from Chair CB steel with arm and S&F new hand rest of size 45x25mm, 440mm long duly polished matching with the existing hand rest (Each chair has 02 handrest). Rest all as per drawing and directed by Engineer -in -charge. |
| 4 | Almirah large steel /Med Steel FD-67(m)/1031/1032(a) Removing the unserviceable handle and S&F new MS handle Chromium plated superior quality as approved by Engr -in Charge . Fixing shall be done as per drg and directed by engineer in charge |
| 5 | (b) Removing the unserviceable shelves for almirah large and supply and fix new shelves made out of 1 mm thick MS Sheet as existing. Rest all as per drg and directed by engineer in charge |
| 6 | (c) Removing the unserviceable shelves for almirah med and supply and fix new shelves made out of 1 mm thick MS Sheet as existing. Rest all as per drg and directed by engineer in charge |
| 7 | (d) Repair the door single side wherever unserviceable from Almirah large steel and supply and fix new door made out of 1 mm thick MS sheel with hinges as existing . Rest all as per drg and directed by engineer in charge |
| 8 | (e) Repair the door single side wherever unserviceable from Almirah Med Steel and supply and fix new door made out of 1mm thick MS sheel as existing . Rest all as per drg and directed by engineer in charge. |
| 9 | (f) Replace the unserviceable leg and S & F new leg made out 1 mm thick MS sheet as existing. Rest all as per drg and directed by engineer in charge |
| 10 | Chair revolving with arm FD/TP :- (a) Taking out U/S tapestry cloth from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc. all as approved and directed by Engr-in-charge |
| 11 | (b) Taking out unserviceable hand rest from chair revolving and S&F new hand rest matching with the existing hand rest.all as approved and directed by Engr-in-charge. (Each Chair content 02 Nos hand rest) |
| 12 | (c) Taking out u/s prang MS/PVC from chair revolving and S&F new prang MS/PVC with wheel matching with the existing shape and size all as approved and directed by Engr-in-charge |
| 13 | (d) Taking out of Hydrualic Assembly from Chair revolving High back/Low back/Med back/Computer and S&F new Hydrualic assembly different type as per trade pattern with the existing shape and size as all as approved and directed by Engr-in-charge |
| 14 | (e) Taking out U/S caster wheel from any type of chair revolving and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size all as approved and directed by Engr-in-charge. (each chair content 05 Nos caster wheel) |
| 15 | (f) Taking out U/S rexin cloth from seat & back of chair revolving Executive and S&F new rexin cloth of approved quality & shade including replacement of foam cushion and plywood etc. all as approved and directed by Engr-in-charge |
| 16 | Charpoy GI with plywood top FD-220(a) Removing the existing broken long rail and supply and fixing 32mm dia GI Pipe med grade of 1980mm long duly threaded at both ends as shown on drawing make: Jindal /TATA. Rest all as per drg and directed by engineer in charge |
| 17 | (b) Removing the existing broken short rail, cutting and threading for short rails of 900 mm long from broken long rails retreved from old charpoy (S.No (a) and fixing as shown on drg and directed by engineer in charge. |
| 18 | (c ) Removing the existing broken legs, cutting and threading for legs of 440mm long from broken short rails retriieved from old charpoy (S.No (b) and fixing as shown of drg and directed by engineer in charge |
| 19 | (d) Removing the existing check nut and Supply and fixing check nut suitable for 32mm bore GI pipe, 6mm thick conforming to IS and directed by engineer in charge |
| 20 | (e) Removing the existing 3 way elbow Supply and fixing elbow 3 way suitable for 32mm bore GI pipe ISI marked and directed by engineer in charge |
| 21 | Removing the unserviceable lock and supply and fixing new 6 lever MS lock Make Harrison/Link with duplicate keys of following items (S.No atod). Rest all as per drg and directed by engineer in charge.(a) Almirah Large Steel FD-67(m)/1031 |
| 22 | (b) Almirah med Steel FD-1032 |
| 23 | (c) Table office clerk steel FD-64(m)/1003 |
| 24 | (d) Table Office Officer Steel FD-1004 |
| 25 | (e) Four door Book case make - godrej |
| 26 | (f) Locker steel FD- 1029 |
| 27 | Taking out unserviceable stiffner and supply & fixing of new stiffner including painting the stiffner with 2 coats of synthentic enamel black paint over a coat of red oxide of following items(S.No (a) & (b). Stiffner should be welded and size all as directed by Engineer in charge.(a) Charpoy GI with plywood top FD-220. (MS Tee angle iron of size 25mm x 6mm x 25mm and 90cm long) |
| 28 | (b) Charpoy IP Hard top FD-FD/MAP-II/01 (stiffner of size of size 25 x25 mmx90cm long 16 gauge MS squar pipe |
| 29 | Removing the unserviceable plywood and supply and fixing new BWR plywod of size 12mm thick ISI Marked of Make Kitply/greenply /century of S.No (a),(b) & (c ) Size as per Drg and directed by engineer in charge(a) Charpoy GI with plywood top FD-220. |
| 30 | (b) Bed Hard with plywood top FD/E6/MAP/8 (R) |
| 31 | (c) Charpoy IP Hard top FD-FD/MAP-II/01 |
| 32 | Chair verandah FD-256. (a) Taking out unserviceable cane from chairs and then cleaning the holes for re canning and supply & re-canning with new half round cane 2/4 mm wide superior quality ISI Marked color as approved by Engr-in-charge. Viewing shall be as per godrej pattern complete All as specifieid in drg and directed by Engr-in-charge |
| 33 | Table top from table office officer/clk steel FD-1003,84,1004(a) Removing the unserviceable table top from table office clerk steel/Table office officers steel (FD-1004/FD-84 & FD1003) and supply and fixing new top made out of prelaminated particle board of 18/19 mm thick ISI marked teak finish on top including 4 mm thick teak wood edging all around the top as shown on drawing and directed by Engr - in- Charge Make : Noavapan/Ecoboard. |
| 34 | (b) Removing the unserviceable drawer table office clerk steel/Table office officers steel (FD-1004/FD-84 & FD1003) and supply and fix new drawer made out of 22 guage MS sheet as shown on drg and directed by engineer in charge. (Each drawer) |
| 35 | (c) Cutting the unserviceable portion of leg/stiffner table office clerk steel/Table office officers steel (FD-1004/FD-84 & FD1003) and supply & fix through welding 25 mm square tube 1.6 mm thick 250mm long as existing shape and directed by engineer in charge. |
| 36 | Preparing the old painted steel surfaces by sand papering , removing dents and bents and repainting/filling with steel putty and spray painting with 2 coats of synthetic enamel Olive Green/black/gray Paint to give glossy finish over a coat of primer S.No (a) to (f) .Rest all as per drawing and directed by Engineer -in -charge. (a) Chair tubular steel without arms FD-75(m) |
| 37 | (b)Table office clerk steel/Table office officers steel FD-1004 |
| 38 | (C) Almirah large steel FD-67(m)/1031 |
| 39 | (d) Almirah medium steel FD-1032 |
| 40 | (e) Charpoy IP Hard Top FD-FD/MAP-II/01 |
| 41 | (f) Chair Verandah FD-256 |
| 42 | (g) Book case steel FD-1028/90/1032 |
| 43 | (h) Locker steel FD-1029 |
| 44 | (j) Almirah MAP steel FD-83 |
| 45 | (k) Rack storage steel adjustable 6 Tier FD-106 (M) |
| 46 | (l) Shoe rack steel MAP FD/E6/M/02R |
| 47 | (m) Table dining steel 900x900x760mm FD-1009 |
| 48 | Removing unsv bush/shoes/knobs/toes and supply and fixing of new bush/shoe/toes/knobs. All as specified in drg and directed by the Engr-in-charge.(a) Chair tubular steel With arms (Each chair content 04 Nos bush) |
| 49 | (b) Charpoy GI With plywood top (Each charpoy content 04 Nos toes) |
| 50 | (c ) Table office Officer steel/ Table office clerk steel (Each table content 04 Nos toes) |
| 51 | (d) Chair verandah (Each chair contain 04 Nosbush |
