|
| 1 | Taking out sealing compound from partially filled joints of size 10mm wide upto complete depth of filled material (approx 30mm deep) from of rigid concrete pavements/slab (thickness of slab150mm), cleaning of joints with brushes and fanning with compressor air to remove all loose dirt/dust etc. and priming and refilling the joints with new sealing compound grade 'A' complete all as specified and directed by Engineer-in-Charge. |
| 2 | Material & labour for marking on runway/helirunway/road /pavements, like lines, dashes, arrows, letters or figures etc. using Hot applied retro-reflective thermoplastic road marking paint (in any colour as directed like white, golden, yellow, orange black etc.) confirming to MORT & H (clause 803.4) with 8% glass beads, using special applicator machine with heating arrangement upto 160 °C including cleaning and drying the existing road surface to ensure dust, oil grease and moisture free surface before applying the paint complete all as specified and as directed by Engineer-in-charge. |
| 3 | M&L for preparation of old existing concrete floor surfaces of any description and in any position by brooming down / wire brushing & finally cleaning with compressed air and to make the surface dust free and providing overall 3mm thick antistatic EPU flooring including primer coat, screed coat. Copper taps , conductive coat, self leveling top coat and application of Exoxy polyurethane paint all as specified and as per manufacturer's instructions complete of Makes M/s Fosroc chemicals, M/s STP Ltd, M/s Sika India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Bostik India Pvt Ltd. |
| 4 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) including demolition of Bricks or brick tiles in floors, channels, kerb, aprons, etc. (each layer) bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-charge. |
| 5 | Material and Labour old size Brick,sub class B laid flat in floors bedded and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 including demolition of Bricks (laid flat or on edge) or bricks tiles in floors, channels, kerb, aprons, etc. (each layer) bedded and pointed in any mortar as in drains complete all as specified and as directed by Engineer-in- charge. |
| 6 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement and taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. (Note :- WPC shall be measured & paid separately as Supply only) |
| 7 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces (internal surface), finished even and smooth without using extra cement and taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 8 | Supply only liquid water proofing compound complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 10 | Material and labour for 75mm thick cement concrete ( 1:2:4), type B-1 (using 20 mm graded stone aggregate) as in floor, hardstanding/paving/path etc., and surface finished even & smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-charge. |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge. |
| 12 | Taking down shutters only of any description area exceeding 2.0 sqm and not exceeding 4.0 sqm each complete all as specified and as directed by Engineer-in- charge. |
| 13 | Supply & fixing powder coated aluminium frame, made out of aluminium section, for doors, windows, ventilators, partition with one or more rebate and for sliding window shutter including jointing cleat for fixing etc. including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.Note :- Weight of each section shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site. |
| 14 | Supply & fixing powder coated anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 03 Nos in each door (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing glass or particle board complete all as specified and directed by Engineer-in-Charge.Note :- Aluminium chowkhat frame, glass and particle board shall be measured and paid separately under appropriate item of BOQ. |
| 15 | Supply & fixing powder coated anodised aluminium window shutter sliding type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 1 No and provision of interlocking system (size of handle as directed), anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium channel frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass (supply only) shall be measured and paid separately under appropriate item of BOQ. |
| 16 | Supply only 4.0 mm thick sheet glass ordinary quality in squares / retangular exceeding 0.5sqm in each pane complete all as specified & directed by Engineer-in- charge. Note :- Labour for fixing of glass shall be included in the main item of shutters. |
| 17 | Supply and fixing in opening PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube manufactured as per SSR part-I specifications and drawing, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Supply and fixing Factory made panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for steel wire fabric mesh not exceeding 4 Kg/ sqm in weight, Welded to steel or fixing to wood members including welding and fixing material complete all as specified and directed by Engineer-in-Charge. |
| 20 | Taking down carefully existing mild steel sliding gate/door (Hangar gate) of size exceeding 30sqm but not exceeding 40sqm each panel, height of gate 8.5m (appx), repair to sliding channel (rail), wheel and all other small steel article by welding and replacement at site in any position including oiling / greasing, alignment / adjustments as easing to slide etc and after complete repair upto entire satisfaction of Engineer-in-charge gate shall be refixed in original position complete all as specified and as directed by Engineer-in-charge. |
| 21 | Material and labour for repair of existing Rolling shutter of size exceeding 20sqm but not exceeding 35 sqm each shutter , height of shutter 6.5 m (appx), repair to Shutter ,ball bearing, as specified including top cover, anchoring rod, hasp and staple and all gear operated system,flanks other small article of rolling shutter by welding and replacement at site in any position including oiling / greasing, alignment / adjustments as easing to slide etc and after complete including takind down and repair upto entire satisfaction of Engineer-in-charge rolling shutter shall be refixed in original position complete all as specified and as directed by Engineer-in-charge. |
| 22 | Supply & fixing 4mm thick sheet glass ordinary quality in squares not exceeding 0.5sqm in each pane (for new door/window) and fixed in any type of doors/windows/ventilators with wooden bead/pin tacked/with oil putty etc. as required or as directed including cutting of glass as per site requirement complete all as specified & directed by Engineer-in- charge |
| 23 | Demolition of floor hearth or wall tiling including cement mortar bedding but not backing including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge |
| 24 | Material and labour for vitrified ceramic coloured tiles (light shade) 08mm to 10 mm thick square or rectangular area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for vitrified ceramic coloured tiles (light shade) 08mm to 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 28 | Dismantling Wall and ceiling boards, ACP boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified. |
| 29 | Supply and fixing GI powder coated frame work 605mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and duly suspended with 4mm GI wire hangers (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 600mmx600mmx6-7mm thick board in false ceiling with aluminium profile sheet on top side and PVC profile sheet on bottom side fixed in grid as per manufacturer specification and dirercted by Engineer-in-charge. |
| 30 | Supply and fixing hollow PVC lining consisting 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame, PVC sheet fleet complete all as specified and as directed by Engineer-in-charge. |
| 31 | Supply & fixing Aluminium composite panel of thickness 4mm adjusting to the aluminium frame complete all as specified and directed by Engineer-in-Charge. |
| 32 | Dismantling/Taking down of bird proofing net in hanger approx height 12 to 15 mtr etc complete all as specified and as directed by Engineer- in- charge. |
| 33 | Material and labour for Anti bird net HDPE twine garware technical fibre limited. 1mm thickness hole size 20mm by 20mm colour black UV stablize dia of border rope 4mm UV stabilized border rope jointed with the net by machine interlocking process using three twiines of the same as that of net tied to 12 mm dia hooks made to shape or welded to steel structure and 12mm dia anchor fastner bolt fixed to PEB structure as aplicable of suitable material. Bird net be fixed on GI wire dia 5mm @ 3x3 mtr grid.complete all as specified and as directed by Engineer- in- charge.Note : Bird net be fixed in hangar approx height 12 to 15 mtr all necessary scaffolding and safety material included in this item. |
| 34 | M&L for vertically hanginging in from of hanger gate and closing of open space of inside roof anti bird net HDPE twine garware technical fibre limited. 1mm thickness hole size 20mm by 20mm colour black UV stabilize dia of border rope 4mm UV stabilized border rope jointed with the net by machine interlocking process using three twines of the same as that of net tied to 12mm dia hooks made to shape or welded to steel structure and 12mm dia anchor fastner bold fixed to PEB structure as applicable of suitable material. Complete all as specified and as directed by Engineer-in-Charge.Note : Bird net be fixed in hanger approx. height 12 to 15 mtr all necessary scaffolding and safety material included in this item. |
| 35 | Material and Labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in sub base of flooring levelling course all as specified and directed by Engr-in-charge. |
| 36 | Material and Labour for machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioning complete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account. |
| 37 | Material and labour for PCC (1:3:6), type C-1 (using 20 mm graded stone aggregate) as in Kerb stone/ coping/packing around chequered tiles/interlocking tiles/PCC jalli & similar work etc complete all as specified and as directed by Engineer-in-charge. |
| 38 | Material and labour for mild steel work tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to latest relevant IS:1161-1979 grade St-240 complete all as specified & directed by Engineer-in- charge. |
| 39 | Material and labour for mild steel framed work, framed/truss work made by using hollow square/rectangular/round pipe (ERW or induction butt welded tubes conforming to latest relevant IS), or other section like angle, tee, plate, distance pieces, cleats etc. and cut to shape, drilled and counter sunk for screw, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and fixed with angle cleats or other connecting plates, gusset plates, brackets, bending and welding, riveting etc, conforming to Gde Fe-410-W (Gde E-250 quality A) complete all as specified and as directed by the Engineer-in-Charge.Note ;- Sketch of truss design and steel section to be used shall be approved by Engineer-in-charge in writing before execution) |
| 40 | Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge. |
| 41 | Supply and fixing aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed by Engineer-in-charge. |
| 42 | Supply & fixing rotational moulded polyethylene water storage tank any colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and including ball valve and gate valve, complete all as specified and as directed by Engineer-in-charge. |
| 43 | Supply & fixing rotational moulded polyethylene water storage tank any colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. |
| 44 | Supply and fixing in replacement bib tap cast copper alloy, chromium plated fancy type, long body with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 45 | Supply & fixing in replacement pillar tap cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of tap shall be as given in SSR or in relevant IS. |
| 46 | Material and labour for complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down and preparing the surfaces smooth and after that applying average 3mm thick layer (1.5mm thick each in two layer application) of white cement based putty after applying putty first and second coat sanding the surface as per requirement by using mechanical sander machine to make the surface even and smooth upto entire satisfaction of Engineer-in-charge and after prepare the surface smooth applying two coats of oil bound distemper (washable) as per approved tint/colour by using paint brush or roller brush complete all as specified and as directed by Engineer-in-Charge. |
| 47 | Material and labour for two coats of weather proof exterior emulsion paint incl preparation, washing rubbing down and stopping of painted surfaces over old surfaces of walls including applying white cement base putty we are required for filling to depression/ nail hole/ light cracks etc complete all as specified and as directed. |
| 48 | Supply & fixing mild steel sections of any size, in framed work such as window grills, framed guard bars, barred iron doors, railings, framework of watertanks, gratings, ladders etc., with end of bar shouldered and/ or reveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165. |
| 49 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe complete all as specified and as directed by Engineer-in- charge. Please Enable Macros to View BoQ information |
