Tender For General-Budget 2025-26( 20% Provision)Providing 20Mm Chipping Carpet To Vanchikavala Girijothy Road In Vazhathope Gramapanchayath.-2025-26-General Civil Work, Vazhathoppu-Kerala
TDR : 54614804
Tender Notice
BOQ
Expired
Vazhathoppu
Kerala
Tender For General-Budget 2025-26( 20% Provision)Providing 20Mm Chipping Carpet To Vanchikavala Girijothy Road In Vazhathope Gramapanchayath.-2025-26-General Civil Work
Name of Work:- GENERAL-Budget 2025-26( 20% provision)Providing 20mm chipping carpet to Vanchikavala Girijothy Road in Vazhathope Gramapanchayath.-2025-26-General Civil Work
Sl. No.
Item Description
1
DETAILED ESTIMATE
2
55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
3
55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
4
3.15:Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres by Mechanical Means <br>
5
4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method
6
4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
7
5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.
8
5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.
9
OD287895/2025-2026:Mix seal Surfacing Providing, laying and rolling of close-graded premix surfacing material of20 mm thickness composed of 11.2 mm to 0.9 mm Type-A aggregate using penetration gradebitumen to required line, grade and level to serve as wearing course on previously preparedbase, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 KN staticroller and finishing to required level and grades as per Technical specification clause 509 ofMORD (Usage of bitumen is 22.00 kg /(10 m2) By Manual Means
10
8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
