|
| 1 | MGNREGS MATERIAL SUPPLY |
| 2 | 100 mm S.C.I. trap with vent heel |
| 3 | 15 mm C.P.brass tap |
| 4 | 200 mm Aluminium aldrop |
| 5 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 6 | Adjustable span ESO+SI (2.35-3.40) |
| 7 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 8 | Aluminium T or L Sections |
| 9 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 10 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 11 | Beam clamp 300-380 mm (450-1070 mm) |
| 12 | Black Japan |
| 13 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 14 | Bright finished or black enameled mild steel screws 20 mm |
| 15 | Bright finished or black enameled mild steel screws 40 mm |
| 16 | C.I. bracket for wash basin and sinks |
| 17 | C.P. brass waste 32 mm |
| 18 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 19 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 20 | Chromium plated Brass screws 20 mm |
| 21 | Chromium plated Brass screws 25 mm |
| 22 | Chromium plated Brass screws 30 mm |
| 23 | Coarse sand (zone III) |
| 24 | Column clamp 450x1070 mm |
| 25 | Corner angle 45x45x5 mm 2.50 long |
| 26 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
| 27 | Fine sand (zone IV) |
| 28 | Flats up to 10 mm in thickness |
| 29 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 30 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 31 | Hard board 6 mm thick |
| 32 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 33 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 34 | Iron hooks & eyes 100 mm |
| 35 | Mild steel round bar 12 mm dia and below |
| 36 | Multi surface paint |
| 37 | Neoprene / EPDM rubber gasket |
| 38 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 39 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 40 | Portland Cement |
| 41 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 42 | Powder coating 50 microns on aluminium sections |
| 43 | Prop 2 m (2-3.5m) |
| 44 | PTMT - Soap Dish/Holder 138x102x75 mm |
| 45 | PTMT - Towel Rail (600 mm) |
| 46 | PVC bend 110 mm dia |
| 47 | PVC door Elbow 110 mm dia |
| 48 | PVC Elbow 63 mm dia |
| 49 | PVC pipe 110 mm outer dia 6kgf/cm2 |
| 50 | PVC pipe 25 mm outer dia. 10kgf cm2 |
| 51 | PVC pipe 63 mm outer dia. 4 kgf/cm2 |
| 52 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 53 | PVC Socket/coupling 110 mm dia |
| 54 | PVC Socket/coupling 63 mm dia |
| 55 | PVC Tee 110x110x110mm dia |
| 56 | PVC Tee 63x63x63 mm dia |
| 57 | PVC vent cowl 63 mm dia |
| 58 | PVC bend 63 mm dia |
| 59 | PVC Reducer 63x50 mm dia |
| 60 | Quarry Waste |
| 61 | Rawl plug 50 mm (designation 10 nos) |
| 62 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
| 63 | Red oxide Zinc chromate primer |
| 64 | Second class kail wood in planks |
| 65 | Second class kail wood in scantling |
| 66 | Second class teak wood in scantling |
| 67 | Solid blocks of size 30x20x15cm |
| 68 | Solid blocks of size 30x20x20cm |
| 69 | Solid blocks of size 40x20x10cm |
| 70 | Special primer (C.W) |
| 71 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 72 | Stone Aggregate(single size): 06 mm nominal size |
| 73 | Stone Aggregate(single size): 10 mm nominal size |
| 74 | Stone Aggregate(single size): 40 mm nominal size |
| 75 | Stone Aggregate(single size):20 mm nominal size |
| 76 | Stone for masonry work |
| 77 | Structural steel such as tees, angles, channels and R.S. joists |
| 78 | Synthetic enamel paint in black or chocolate shade |
| 79 | Through and bond stone size 24 x 24 x 39cm |
| 80 | Twisted steel/deformed bars |
| 81 | Vibrator (Needle type 40 mm) |
| 82 | Vitreous China flat back wash basin 630x450 mm |
| 83 | Vitreous China orrisa type w.c. pan size 580 mm |
| 84 | Vitrified floor tile 60x60 cm |
| 85 | Wall form panel 1250x450xmm |
| 86 | Welding by electric plant |
| 87 | Sundries |
| 88 | Binding wire |
| 89 | GI Chicken mesh ( 24 guage 12.5x12.5mm) |
| 90 | GI trafford profile sheet 0.35mm thick |
| 91 | Bitumen washer |
| 92 | G.I Limpet washer |
| 93 | Galvanised steel J or L hooks 8 mm dia |
| 94 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 95 | Mild steel tubes hot finished welded type |
| 96 | Welding by electric plant |
| 97 | wall form panel 1250x500 mm |
| 98 | Stainless steel screws 50 mm |
| 99 | Adjustable span ESO+SI (2.35-3.40) |
| 100 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 101 | Corner angle 45x45x5 mm 1.50 m long |
| 102 | 100 mm channel shoulder 2.5 m long |
| 103 | Double clip (bridge clip) |
| 104 | Single clip |
| 105 | M.S. Tube 40 mm dia Please Enable Macros to View BoQ information |
