|
| 1 | APPENDIX 1-Priyadarsini |
| 2 | 50.18.9.2.2 Providing and fixing PVC pipes includings of pipes with one step PVC solventcement, trenching, refilling & testing of joints complete as per direction ofEngineer in Charge. 20 mm dia 10 Kgf/cm2 |
| 3 | OD353482/2025-2026 Providing and fixing of 1/2 inch ( 15 mm ) Class-B Muitijet water meter .Water meter fixing. |
| 4 | 50.18.9.6.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge. 50 mm dia 10Kgf/cm2 |
| 5 | 50.18.9.7.1 Providing and fixing PVC pipes includings of pipes with one step PVC solventcement, trenching refilling & testing of joints complete as per direction ofEngineer in Charge. 63 mm dia 6Kgf/cm2 |
| 6 | 51.18.12.6 Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paidseparately) <br> External work - 50 mm nominal dia |
| 7 | OD353484/2025-2026 Providing and fixing of Mobile Operating System.Mobile Operating System. |
| 8 | OD342363/2025-2026 Supplying & erection of a motor & Pump with ISI mark specification,including all accessories & panel board, as per duty conditions - Discharge 7,000 lph of water against a total head 80 m pumping main length (approximately) 1 Km asper IE rules & KSEB standards and completion of all the works including trialrun |
| 9 | APPENDIX 2-Godavary SJVS |
| 10 | Distribution System 100.9.6Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing thepipes and specials with solvent cement and testing the pipeline with water to therequired test pressure (excluding cost of pipes and specials): 63 mm nominal outsidediameter pipes |
| 11 | OD352345/2025-2026Providing and fixing of 1/2 inch ( 15 mm ) Class-B Muitijet water meter |
| 12 | 18.17.3Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :40 mm nominal bore |
| 13 | 18.17.4Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :50 mm nominal bore |
| 14 | OD353527/2025-2026Supply of 2 Inch Class B ASTM Pipe |
| 15 | 100.1.1Excavating trenches of required width for pipes, cables, etc., including excavation forsockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, includinggetting out the excavated soil, and then returning the soil as required, in layers notexceeding 20cm in depth, including consolidating each deposited layer by ramming,watering, etc., and disposing of surplus excavated soil as directed, within a lead of50m, in all kinds of soil. |
| 16 | Providing and fixing PUMP OD352465/2025-2026 Supply erection and Trial Run of 7.5 HP Open well Submersible Pump and Motor with ISI Specification with Duty condition, Discharge 7,500 lph of water against atotal head 100 m pumping main length (approximately) 1 Km as per IE rules &KSEB standards and completion of all the works including trial run .-Starter ,PanelBoard,Earthing And All wiring including Labour Meterials etc Complete. |
| 17 | APPENDIX 3-Kissan BG |
| 18 | 50.18.9.5.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching refilling & testing of joints complete as per directionof Engineer in Charge 40 mm dia 10Kgf/cm2 |
| 19 | 50.18.9.4.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 20 | 18.17.3Providing and fixing gun metal gate valve with C.I. wheel of approved quality(screwed end) :40 mm nominal bore |
| 21 | OD342261/2025-2026Supplying & erection of a motor & Pump with ISI mark specification,including all accessories & panel board, as per duty conditions - Discharge 7,000lph of water against a total head 80 m pumping main length (approximately) 1 Km asper IE rules & KSEB standards and completion of all the works including trialrun |
| 22 | APPENDIX 4-Gangothri SJVS |
| 23 | 50.18.9.6.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge. 50 mm dia 10Kgf/cm2Distribution. |
| 24 | 50.18.9.4.1Providing and fixing PVC pipes includings jointing of pipes with one step PVCsolvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 25 | 50.18.9.7.1Providing and fixing PVC pipes includings of pipes with one step PVC solventcement, trenching refilling & testing of joints complete as per direction ofEngineer in Charge. 63 mm dia 6Kgf/cm2 |
| 26 | 18.16.1Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 27 | OD342100/2025-2026Supply erection and Trial Run of 7.5 HP Open well Submersible Pump and Motorwith ISI Specification with Duty condition, Discharge 7,500 lph of water against atotal head 100 m pumping main length (approximately) 1 Km as per IE rules &KSEB standards and completion of all the works including trial run .-Starter ,PanelBoard,Earthing And All wiring including Labour Meterials etc Complete. |
| 28 | OD353470/2025-2026Providing and fixing of 1/2 inch ( 15 mm ) Class-B Muitijet water meter . Please Enable Macros to View BoQ information |
