|
| 1 | Lobby Acoustic and interior works |
| 2 | OD331819/2025-2026:Acoustic Ceiling -Supply and installation of Acoustic Ceiling with PET panels of 9 mm thick installed on ply framework with Acoustic polywool infill 50 mm 1000 GSM .-NRC-0.7, Shades -As per selection.The PET panels are fixed using GI ultra section and 9mm plywood framing to get seamless Finish.Panels shall be back lined with acoustical infill of Poly fibre 50mm thick 1000 including providing supporting frame work of 150mm thickness using BWP grade plywood and GI section channels. |
| 3 | OD331939/2025-2026:ACOUSTIC DOOR-Door size: 210 x 120 cm-Supply of Acoustic Door 50mm thick,STC 40dB with frame.(Seasoned Hard Wood Door Frame, Engineered Shutter 45mm thick with hard wood lip & Laminate Finish. incl. AccessoriesLocks, Peremeter, Seals,Various Iron Mongery, Door Closure Drop down seal. Door handle, Door Type - Single Door, SOUND PROOF DOOR is constructed as below An Aluminum/Wooden Section Frame is constructed to the size complaint measurement to accommodate Locks and other accessories on final finishes. Inside the frame is ZONO STING levelled to the frame on One End and 2.7mm gap on the other end. Zono block Viny Barrier is used on either side of Aluminum till the edge. High Density Board is also framed on either side with edge finishing and provision for door accessories is also made to the selected variants. Finishing on the surface and the sides are done using approved Laminate. Door size: 120 ? 210 cm) |
| 4 | OD333689/2025-2026:Acoustic Door- Door size: 90cm x 120 cm- Supply of Acoustic Door 50mm thick, STC 40dB with frame.(Seasoned Hard Wood Door Frame, Engineered Shutter 45mm thick withhard wood lip & Laminate Finish. incl.Accessories,LocksPeremeter Seals,Various Iron ,Mongery, Door Closure ,Drop down seal. Door handle ,Door Type - Single Door. SOUND PROOF DOOR is constructed as below An Aluminum/Wooden Section Frame is constructed to the size complaint measurement to accommodate Locks and other accessories on final finishes. Inside the frame is ZONO STING levelled to the frame on One End and 2.7mm gap on the other end. Zono block Viny Barrier is used on either side of Aluminum till the edge. High Density Board is also framed on either side with edge finishing and provision for door accessories is also made to the selected variants. Finishing on the surface and the sides are done using approved Laminate. Door size: 90cm x 120 cm |
| 5 | OD42232/2025-2026:Supply and installation of Acoustic Cloud Ceiling with PET panels of 12 mm thick 1200mm X 1200 mm suspended from the ceiling .-NRC-0.5, Shades -As per selection.(Cost for painting in ceiling is not included -measured separately) |
| 6 | 15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar |
| 7 | OD332040/2025-2026:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 8 | 12.25.1:Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete ( frame work to be paid separately):12 mm thick |
| 9 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 10 | 15.23.2:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm |
| 11 | OD335419/2025-2026:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand),including grouting the joint of skirting tiles having joints of 3mm width, using epoxy grout mix of 0.70kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg)with white cement & matching pigments, etc. complete. ( based on spec 11.37 & 11.48.2) |
| 12 | 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | 50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 |
| 14 | 50.18.8.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2 |
| 15 | 50.18.8.7.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc 63 mm pipe 4 kgf/ cm2 |
| 16 | 50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 17 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall |
| 18 | 50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall |
| 19 | 50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall |
| 20 | OD164525/2025-2026:Providing and fixing Cabinet wash basin floor mount ,including 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tap with cabinet of Material: BWR plywood Cabinet, PU painted doors, Good Quality 304 Grade Hinges, Color: White Urban Brown ,black including cost of all materials and labour charges. (Based on DSR item no.17.7.1). |
| 21 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 22 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 23 | 17.78:Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete. |
| 24 | OD164581/2025-2026:Supplying and fixing PVC single panel mat finish door with steel odambal including all labor charges and material cost and conveyance etc |
| 25 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 26 | OD165671/2025-2026:Supplying Leatherette Office Chair With Adjustable Armrest, Adjustable Seat Height, Head Support, Locking Mechanism, Recline, Seat Lock, Swivel Wheels, chair Width x Height: 56 cm x 124 cm (1 ft 10 in x 4 ft), Frame Material: Metal, Upholstery Type: Cushion. |
| 27 | OD165672/2025-2026:Supplying dining table 42''x42'' square wooden dinning table with wooden cushion chairs-4nos of best quality as per direction of Engineer in charge. |
| 28 | OD165673/2025-2026:Supplying Single seater sofa of premium quality as per direction of Engineer in Charge. |
| 29 | OD165675/2025-2026:Supplying Double seater sofa of premium quality as per direction of Engineer in Charge. |
| 30 | OD167236/2025-2026:Supplying lap top table plywood make 16mm thickness of size 1.00mx0.75 meter size of automatic folding monitor type of best quality as per direction of Engineer in charge. |
| 31 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 32 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 33 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work |
| 34 | 9.156.2:Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both dide exterior Grade-I MDF Board 18 mm thick confirming to IS:14587. |
| 35 | Inverter room |
| 36 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 37 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 38 | 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 39 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 40 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 41 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 42 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 43 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work |
| 44 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 45 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 46 | OD335568/2025-2026:Supplying and fixing Pressed steel single door of standard pattern with frame as per profile of IS 4351 of section 105x60mm using 18G ( TATA GALVANO) sheet and shutter made of section 75x30cm using 20G (1.00mm TATA GALVANO) sheet outer styles and horizontal members and then inserted with enclosed and stiffened sheet as per specification with Zincromate primer coat ,SS handle ,SS aldrop SS but hinges etc.including labour charges,conveyance etc Complete. Please Enable Macros to View BoQ information |