Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | B/R Works |
| 2 | M&L for PCC type E-2 (1:5:10), using 40 mm graded crushed stone aggregates as in filling & mass concrete, sub base, complete all as specified and directed. |
| 3 | M&L for RCC type B-0 (1:2:4), using 12.5 mm graded crushed stone aggregates as in chajjas/ cooking platform etc including necessary formwork with and including 5mm thick rendering in CM 1:3 to finish even and smooth of conrete surface without using extra cement complete all as specified and directed. |
| 4 | M&L for Brick work using sub class B bricks/fly ash brick as specified in PS , straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 5 | M&L for Brick work using sub class B bricks/fly ash brick as specified in PS, straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4), complete all as specified and directed. |
| 6 | S&F, Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 7 | S&F, Factory made 30 mm thick ,2nd class hard wood Glazed and skeleton shutters for window, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 8 | M&L for Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified. |
| 9 | S & F Solid PVC door frame of the size 50mmx47mm with a wall thickness of 5mm made out of extruded 5mm thick Wood grain Printed PVC sheet reinforced with 15mmx15mm M.S. Square Tubes of 19 gauge thickness throughout the frame and miter cut at two corners and jointed with 2nos of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long M S screws through the frame by using PVC fasteners. A minimum of 4 nos of screw to be provided for each vertical member and minimum of 2 nos of screws to be provided horizontal member etc complete as per direction of Engineer in Charge & Manufactures direction. |
| 10 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC Sheet & 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mmx10mm (90 Degree)used instead of exposed portion of PVC sheet beading & PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR part-II 2020 Section-8, clause 8B.1 to 8B.2.1 and shown on drawing in page No 146 of SSR part-II 2004. |
| 11 | M&L for 2nd class hard wood beadings, straight or chamfered or rounded, 25mm wide, fixed to existing wooden frame work with necessary glue, nails etc., fixed in repairs, complete all as specified and directed. |
| 12 | M&L for Soft rubber beading, 50 to 65 mm wide, 5mm thick fixed in repairs the bottom of door shutters with screws, nails, adhesive and covered with 4mm thick teak wood beading of 20mm wide complete all as specified and directed. |
| 13 | S&F Factory made PVC Cupboard Shutter Flush type of 22mm thickness consisting of panel of hollow PVC profile of 12mm x 12mm inserted all around the hollow profile section and insert one 10mmx10mm MS tube in the center of this section and lipped with 10mm(5mmx2)thick and 12mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel. The front side of the panel visible in the front of the shutter to be edge bonded using 20mmx1mm the PVC leaping on both the edges with locking arrangement of both panels etc complete as per direction of Engineer-in Charge & Manufacturers’ Specifications. |
| 14 | S&F, Factory made PVC Cupboard Shutter Flush type of 22mm thickness consisting of panel of hollow PVC profile of 12mm x 12mm inserted all around the hollow profile section and insert one 10mmx10mm MS tube in the centre of this section and lipped with 10mm(5mmx2)thick and 12mm wide on stiles and rails using solvent cement.the inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant printed PVC sheet using solvent cement on both the sides of the panel.The front side of the panel visible in the front of the shutter to be edge bonded using 20mmx1mm th PVC leeping on both the edges with locking arrangement of both panels etc complete all as specified and directed. |
| 15 | S&F, Factory made PVC shelf of 22mm thickness consisting of panel of hollow PVC profile of 12mm thickness consisting of M S frame made out of M S tubes of 19 gauge thickness and size of 12mmx12mm inserted all around the hollow profile section and insert one 12mmx12mm M S tube in the center of this section and lipped with 10mm(5mmx2)th and 12mm wide on stiles and rails using solvent cement.The inner panel shall be laminated with 5mm th termite proof water proof and fire retardent plan PVC sheet using solvent cement on both the sides of panel.The front side of the partition visible in the front of the cupboard to be edge bonded using 20mmx1mm th plain PVC Leeping on both edges etc. complete all as specified and directed. |
| 16 | M&L for Decorative laminates type I, 0.9-1 mm thick of matt finish, colour and pattern as approved by GE, fixed with approved adhesive complete all as specified. |
| 17 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather roof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 18 | S&F Aluminium alloy, anodized, 250 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed by Engineer in Charge. |
| 19 | S&F 100 mm long, butt hinges extruded aluminium alloy type C-21 with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed. |
| 20 | S&F 250 mm long mild steel, helical, door spring including roller & roller plate fixed complete all as specified and directed |
| 21 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section, fixed as in repairs, complete all as specified and directed. |
| 22 | S&F 125 mm long, aluminium anodized, door handle, fixed in repairs, complete all as specified and directed. |
| 23 | S&F 150 mm long floor door stopper of aluminium alloy body, with rubber shoe, fixed in repairs, complete all as specified and directed. |
| 24 | S&F PVC door silencer fixed to doors with steel screws, IN REPAIR, complete all as specified and directed.. MAKE: PRAYAG CAT NO. DSR-RB-03 or equivalent make mentioned in Appendix 'B' |
| 25 | S&F 40 mm dia cupboard knobs mild steel bright finished polished fixed in repairs with nuts, screw and washer of mild steel bright finished complete all as specified and directed. |
| 26 | S&F Stainless steel curtain rod of 20mm dia, powder coated having wall thickness 1 mm, with aluminium powder coated brackets fixed to walls with screws, Gutties and including taking out the existing old pelmet box along with old curtain rods and removing complete all as specified and directed. |
| 27 | S&F Stainless steel brackets fixed to wall with raw plugs & stainless steel screws, IN REPAIR complete all as specified and directed. complete. |
| 28 | S&F PVC Phenols for Curtain rod all as per specification and as approved by Engr In Charge. |
| 29 | Repair & making serviceable mild steel cupboard shutters by adjusting locking arrangement & ms bars incl necessary welding ,riveting or belting which ever is reqd all as per specification and complete all as specified and directed. |
| 30 | S&F 6 lever lock including handle and MS Rod for built in cupboard including necessary fitting complete all as specified and as directed by engineer in charge make Godrej or equivalent |
| 31 | M&L for Mild steel bar locking arrangement, suitable for godrej pattern cupboard shutter complete all as specified and directed. |
| 32 | S&F Mild steel chromium plated handle, suitable for godrej pattern cupboard shutter IN REPAIR complete all as specified and directed. |
| 33 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 34 | S&F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | S&F door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and directed.. |
| 36 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; covers for traps etc walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 37 | S & F Rolled section as in column main beam rafter purlin where connected to common rafter and running rail including dismantling existing rusted/unserviceable member of shed confirming to FE-415 complete all as specified and directed. |
| 38 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, holing ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 39 | S&F Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete all as specified and directed. |
| 40 | All as per item above here-in-before but with out sash bars complete all as specified and directed. |
| 41 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 42 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed. |
| 43 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 44 | M&L for Welding works exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 45 | M&L for 18/19 mm thick High density board , flat pressed, single layer type or three layer type with BWR fixed as in shutter / shelf of kitchen cabinets and cupboards with necessary screws, IN REPAIRS, complete all as specified and directed. |
| 46 | S & F mild steel chrome finish handles suitable of cabinets/cupboards 200 mm size complete all as specified and directed. |
| 47 | S & F stainless steel hydraulic auto soft closing hinges 100 mm size including necessary fixing accessories complete all as specified and directed. |
| 48 | S&F in repairs Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with and including 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified. |
| 49 | S&F in repair 12 mm thick perforated particle board /tiles for insulation and accustic purpose 600x600mm size suitable for snap grid ceiling frame all as specified and directed. |
| 50 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismentling existing sheet complete all as specified and directed. |
| 51 | M&L for Rendering 15 mm thick (Average thickness) on sunken surfaces including flashings, finished even and fair in cement mortar (1:4), mixed with and including water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sqm, complete all as specified and directed. |
| 52 | M&L for clean the sunken/ lowered portion of RCC Slab surface for full depth of sunken floor by wire brush. Chisel out any mortar sticking the surface and applying FOSROC Nitoproof 600PF (minimum 0.8 mm dft) over a priming coat of Nitoproof WB Primer or equivalent product of Asian paints, M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STP applied as per manufacturers instructions and full vertical sides of sunken floors. Fill it with water and check for dampness and seepage. In case the slightest indication of seepage/ leakage to be noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC nitobond SBR or equivalent of M/s MC Bauchemie/CIPY/ SIKA/ Pidilite/ DR Fixit/ Thermex STP/ Asian Paints admixed with integral WPC or cementations crystalline waterproofing compound in the affected area to steal all cracks and micro cracks if any, and this shall be done by contractor at his own cost. All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy cement mortar complete all as specified and directed. |
| 53 | M&L for 50 mm thick, cement concrete type C-2, 1:3:6 using 20 mm graded crushed stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified and directed. |
| 54 | M&L for 40mm thick cement concrete (1:2:4) Type B-1 using 20mm graded crushed stone aggregate as in flooring and like finished etc. finished even and smooth without using extra complete all as specified and directed. |
| 55 | M&L for Granite (of any type) work (table rubbed and polished) 15-18 mm thick as in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20 mm thick screed bed in CM (1:6) for laying of Granite slab& pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and directed. |
| 56 | M&L Coloured Glazed ceramic tiles in vertical surface 450X300x 7/600x300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed. |
| 57 | S&F 6-7 mm thick non skid ceramic coloured tiles of size exceeding .06 sqm but not exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over 15 mm thick cement screed bed or bedding layer in CM 1: 4 complete all as specified and directed by Engineer-n-Charge (colour of tiles shall be as approved by GE). |
| 58 | M & L for dark shade (Double Charged) , Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exc 1.00 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed bed or bedding layer CM 1:4 etc completed all as specified |
| 59 | Ditto But as in Skirting |
| 60 | M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. |
| 61 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), complete all as specified. |
| 62 | M & L for rendering 10 mm thick in CM 1:4 finished even and fair in patch works all as specified and directed by the Engr In Charge. |
| 63 | M&L for Repairing of RCC projection chhajjas, roof, facia etc by necessary preparation. Scraping cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC with cement concrete Type A-0(1:1.5:3) and reinforcement with welded mesh of weight not more than n.exc 3 kg/Sq.m (if reqd) with or without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches of area n.exc 5 Sq.m and thickness of RCC member n.exc 70 mm incl necessary formwork at any height/location complete all as specified and directed. .NOTE: The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey bldg. |
| 64 | M&L for One coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 65 | M&L for Three coats of white wash on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 66 | M&L for One coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified and directed. |
| 67 | M&L for Two coats of white wash on old wall surfaces, including preparation of surfaces, complete all as specified and directed. |
| 68 | M&L for One coat of interior acrylic distemper (white / tinted) of old ceiling surfaces including prepration of surfaces complete all as specified and directed. |
| 69 | M&L for Preparation of old plastered/unplastered old decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots & by removing existing treatment by scrapping down with mechanical vacuum mechanism) having RPM between 600-1500 , sanding paper of 60/80 grit having dia of 7\\"/9\\" to make the surface free from dust , loose paint etc. by skilled labour and applying two coat of acrylic distemper over a coat of wall care putty after removal of nails & filling with putty on wall surfaces complete all as specified and directed by Engineer-in-charge. |
| 70 | M & L for preparation of newly plastered surfaces of walls but in patches (area of each patch not exc 3.00 Sq mtr) to match the existing surface and colour as on required basis complete all as specified and as directed by Engineer in Charge . |
| 71 | M&L for preparation of old external decorated/undecorated surfaces of walls, pilasters, cornices, etc up to three storey buildings by removing complete existing treatment from wall surfaces and applying two coats of weather proof exterior emulsion paint of approved shade including on coat of primer complete all as specified and as directed. |
| 72 | M&L for preparation of new external decorated/undecorated surfaces of walls, pilasters, cornices, etc upto three storey buildings and applying two coats of weather proof exterior emulsion paint of approved shade including on coat of primer complete all as specified and as directed. |
| 73 | M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified and directed. |
| 74 | M&L for Sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified and directed. |
| 75 | M&L for Figured glass pin head type 4 mm thick, and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified and directed. |
| 76 | M&L for Preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 77 | M&L for Preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 78 | M&L for Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and directed. |
| 79 | M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed. |
| 80 | M&L for Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed. |
| 81 | M&L for Steel tubes 15mm bore pipe ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections from existing location complete all as specified and directed. |
| 82 | M&L for Steel tubes 20mm bore pipe ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections from existing location complete all as specified and directed. |
| 83 | Disconnecting existing tanks of capacity exceeding 500 litre but not exceeding 1000 litre, setting aside (or lowering if required) for cleaning/roof repair etc. and hoisting, reconnecting and re-fixing in position after necessary cleaning by removing all scale and dirt etc. including cleaning mouth of circulating service pipes complete all as specified and directed. |
| 84 | S&F, 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIRS, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 85 | S&F, 1000 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIRS, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, IN REPAIRS, complete all as specified. |
| 86 | S&F, Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. |
| 87 | S&F 2-in-1 bib cock, long shank with flange, regular half turn with foam flow, 15mm size, fixed in repairs, all as specified and directed.Make: Cat No. 512-A of ESSCO or equivalent model in makes JOHNSON/ ESS ESS/ ARK |
| 88 | S&F 15mm bore CP stop valve (concealed type) brass cast copper alloy, screwed down, high pressure, with capstan heads, screwed both ends for iron pipe or for union fancy type with long shank and cup fixed in repair complete all as directed by EIC. |
| 89 | S&F, Pillar cock, swan neck type, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete all as specified and directed. |
| 90 | S&F Centre hole basin mixer with hot or cold mounted tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts fancy type screwed for iron pipe, fixed as in repairs complete all as specified and directed. |
| 91 | S&F, Overhead ABS 125mm shower with cast copper alloy chromium plated arm 225 mm long with flange and fixed in position, IN REPAIRS, complete.MAKE: PRAYAG Cat No. BS-76 or equivalent make mentioned in Appndix 'B'. |
| 92 | S&F, Bathroom mirror Cabinet (PTMT alloy) of size 450 x 350 x 100 mm with SS screws and fixed in position, IN REPAIRS, complete all as specified and directed. MAKE: PRAYAG Cat No. 557 or equivalent make mentioned in Appndix 'B'. |
| 93 | S&F, Looking mirror 600 x 600 mm, selected quality glass 5.5 mm thick, mounted on PVC ply not less than 4 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPAIRS, complete all as specified & directed. |
| 94 | S&F Sheet glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long in repair complete all as specified & directed. |
| 95 | S&F Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts, fixed in repairs, all as specified and as directed.Make: Onida/ High Life/ Eagle |
| 96 | S&F Tubular towel rail cromium plated 20mm dia D-type 60cm long between flanges, fixed as in repairs, complete, all as directed by EIC. |
| 97 | Supply and fixing in repair Chromium plated hand shower (Health Faucet) with 8mm dia, 1.2metre long flexible tube & wall hook complete all as specified and directed. |
| 98 | S&F Chromium plated, Brass, jet spray including PVC connection for wash down water closet (pedestal pattern), fixed as in repairs, complete all as specified and directed. |
| 99 | S&F Vitreous china EWC (Pedestal pattern) type white complete including plastic WC seat cover white closed pattern with flat bottom and MS chromium plated hinging device complete all as specified. Fixed in repair complete all as specified and directed. |
| 100 | S & F Plastic water closet seat cover white closed pattern with flat bottom and mild steel chromium plated hinge arrangement fixed in repairs all as specified and directed. |
| 101 | S&F PVC flushing cistern 10 litre capacity, valve less symphonic action type, low level, white with inlet ball valve, float and handle including brackets fixed in position and connection to water tubing with PVC connection 15 mm dia with PTMT check nuts including PVC 32mm dia flush pipe fixed in repair complete all as specified and directed.Make: HINDWARE / PARRYWARE / WATER BIRD / COMMANDER |
| 102 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 103 | S&F Wash hand basin vitreous china white, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore, including connection to water tubing with PVC connection 45cm long with PTMT check nuts (excluding tap) fixed in repairs complete all as directed by EIC. Make: HINDWARE/ PARRYWARE/CERA |
| 104 | S&F 32 mm dia waste fittings, brass chromium plated for stainless steel sinks etc. with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed in repairs complete all as specified and as directed by Engineer in Charge. |
| 105 | S&F 32mm dia PVC waste pipe for WHB, fixed in repairs, complete, all as directed by EIC. |
| 106 | S&F Stainless steel gratings with frame, dome type, 125 mm dia, with or without hole for waste pipe connection fixed in repairs,complete all as specified and directed. |
| 107 | S&F 15 mm dia, PVC bib taps, standard of PTMT, any colour, screwed for iron pipe and fixed in repairs (minimum weight 90 gms complete all as specified and directed. |
| 108 | S&F PVC connections 450mm long between ends with 2 Nos. brass nuts and washers, 15mm size, fixed in repairs, complete all as specified and directed. |
| 109 | S&F in repairs stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 110 | S&F Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 495mmx420mm with bowl size 410mm x 330mm x160mm IN REPLACEMENT complete all as specified and directed |
| 111 | S&F Steel plate rack made of stainless steel 0.60 mm thick over all size 600mm x 750mm complete all as specified and directed. |
| 112 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joint laid in trenches or in floors and walls including clamps. |
| 113 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joint laid in trenches or in floors and walls including clamps. |
| 114 | S&F in repairs PVC (SWR) bends 75 mm bore complete all as specified and directed. |
| 115 | S&F in repairs PVC (SWR) bends 110 mm bore complete all as specified and directed. |
| 116 | S&F in repairs PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 117 | S&F PVC kit for low level flushing cistern, fixed as in repairs, complete all as specified and directed. |
| 118 | S&F in repairs15 mm brass spindle any type 50 mm long complete all as specified and directed. |
| 119 | S&F in repairs15 mm brass spindle any type 75 mm long complete all as specified and directed. |
| 120 | S&F, CP knobs for taps/ angle cocks of any types IN REPAIRS complete all as specified and directed. |
| 121 | Taking down chowkhats or frame with shutter without taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and directed. |
| 122 | Taking down chowkhats or frame with shutter without taking off shutter from the frame area exc 1.5 Sqm but n exe 4.0 sqm each complete all as specified and directed. |
| 123 | Taking down shutters of any description exe 1.00 sqm but n exe 2.00 Sqm each complete all as specified and directed.directed. |
| 124 | Taking down shutters of any description n exe 1.00 sqm each complete all as specified and directed. |
| 125 | Taking down, easing, adjusting of old wooden shutters of any description not exc 1 Sqm each and refixing in same opening complete all as specified and directed. |
| 126 | Taking down, easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening complete all as specified and directed. |
| 127 | Dismantling floor hearth and wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.. |
| 128 | Taking down cement plaster/cast in situ terrazzo of any description on brick walls or concrete surfaces/ceiling surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 129 | Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed. |
| 130 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and pre-cast concrete articles complete all as specified and directed. |
| 131 | Demolition of cement concrete in ground floors and paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 132 | Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 133 | Dismantling framed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 134 | Dismantling framed timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40 sq. cm , in any position complete all as specified and directed. |
| 135 | E/M Works |
| 136 | M&L for pointing wiring with 1.5 sqmm (nominal area) PVC insulated FRLS H, unsheathed, multistrand, 1100 volts grade copper conductor cable single core drawn through in and including non metallic concealed PVC conduit medium grade of suitable dia as per SSR specification and its accessories including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including MS terminal box flushed to wall with 3mm thick laminated hylem sheet top cover for fixing of switch/socket etc all as specified. Note:- surface conduit shall be laid in ceiling portion only. |
| 137 | One light/ceiling fan/exhaust fan /call bell point controlled by one switch. |
| 138 | One 3 pin 5 amps socket point on independent board |
| 139 | One 3 pin 5 amps socket point on same board |
| 140 | One light point controlled by 2 Nos two way switches |
| 141 | One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed. . |
| 142 | M&L for point wiring with 4 sqmm (nominal area) PVC insulated , unsheathed, multistrand, 1100 volts grade copper conductor cable single core FRLSH drawn through with and including non metalic concealed PVC conduit medium grade and its accessories including one run of 4 sqmm PVC insulated copper conductor cable green in colour for continuous earthing and MS terminal box flushed to wall with 3mm thick laminated hylem sheet top cover for fixing of switch/socket etc all as specified. Note:- surface conduit shall be laid in celing portion only. |
| 143 | M&L for pointing wiring with 1.5 sqmm (nominal area) PVC insulated FRLS H, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metallic concealed PVC conduit medium grade of suitable size as per SSR Part 1 and its accessories including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including MS terminal box Module type alongwith modular white cover plate with frame all as specified. Note:- surface conduit shall be laid in ceiling portion only. |
| 144 | One light/fan call bell point controlled by one switch (Modular type). |
| 145 | One 3 pin 5 amps socket point on independent board (Modular type). |
| 146 | One 3 pin 5 amps socket point on same board (Modular type). |
| 147 | One light point controlled by 2 Nos two way switches (Modular type). |
| 148 | One socket outlet, 6/16 Amp (Modular type), independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed. . |
| 149 | S&F, Switch piano flush button single pole one way, 6 Amp complete all as specified. |
| 150 | S&F, Switch piano flush button single pole two way, 6 Amp complete all as specified. |
| 151 | S&F, Switch piano, bell/buzzer push, flush button single pole one way, 6 Amp complete all as specified. |
| 152 | S&F, Switch piano flush button single pole one way, 16 Amp complete all as specified. |
| 153 | S&F, Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified. |
| 154 | S&F, Socket outlet multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, flush type complete, all as specified. |
| 155 | S&F, Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified. |
| 156 | S&F, Lamp (angle) holder, insulated body, cord grip pattern, complete, all as specified. |
| 157 | S&F, Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified. |
| 158 | S&F, Fan regulator (electronic) suitable for 48”/56” sweep fan, step socket type, single phase, complete all as specified. |
| 159 | S&F, Switch modular type single pole one way, 6 Amp, complete all as specified and directed. |
| 160 | S&F, Switch modular type single pole two way, 6 Amp, complete all as specified and directed. |
| 161 | S&F, Bell push switch modular type single pole one way, 6 Amp, complete all as specified and directed. |
| 162 | S&F, Switch modular type single pole one way, 16 Amp,complete all as specified and directed. |
| 163 | S&F, Socket outlet modular type multipurpose having provision for 2&3 pin, 6 Amp, complete all as specified and directed. |
| 164 | S&F, Socket outlet modular type multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, complete all as specified and directed. |
| 165 | S&F, Fan regulator modular type (electronic) suitable for 48”/56” sweep fan, step type, two module, complete all as specified and directed. |
| 166 | M&L for Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated multi stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS PVC insulated multi stranded copper conductor 1.1 KV grade for earthing in conduits including taking down old , complete all as specified for the following: - |
| 167 | 2 runs of 2.5 Sq. mm main cable + 1 run of 2.5 Sq. mm earth cable |
| 168 | 2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable |
| 169 | 2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable |
| 170 | S&F, Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, IN REPLACEMENT, complete all as specified comprising the following: - |
| 171 | SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type. |
| 172 | TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type. |
| 173 | TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type and including MCCB 4 pole 63 Amp, 16kA. |
| 174 | S&F, in replacement MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp, complete all as specified and directed. . |
| 175 | S&F, in replacement MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 32 Amp, complete all as specified and directed. |
| 176 | S&F, in replacement MCB suitable for 415 volt AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 63 Amp, complete all as specified and directed. . |
| 177 | S&F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volt, breaking capacity not less than 10 kA, complete all as specified and directed. |
| 178 | S & F in replacement LED light fitting 1x10W bulkhead luminaires including LED light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 179 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 180 | Supply and fixing in replacement of LED mirror light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder including connecting up with flexible copper conductor cable of suitable size complete complete all as specified and directed. |
| 181 | Supply and fixing in replacement round shape 12W,220V AC, recessed type with high efficiency PMMA diffuser with soft glare free day light complete with drivers, Holdrs, LED Lamps suitable for roof ceiling including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. |
| 182 | Supply and fixing in replacement round shape 6W,220V AC, recessed type with high efficiency PMMA diffuser with soft glare free day light complete with drivers, Holders, LED Lamps suitable for roof ceiling including connecting up with tree core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 183 | Supply and fixing in replacement rigid non-metallic PVC conduit of size 20mm dia medium grade suitable for electrical wiring complete all as specified and directed. |
| 184 | Supply and fixing in replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 185 | Supply and fixing in replacement exhaust fan made of steel body complete with frame, louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of sweep 300mm complete all as specified and as directed. |
| 186 | Taking down copper/aluminium point wiring (light, fan , socket or power) complete including fixtures and fittings such as switches, ceiling rose, pendant ,regulators,sockets,light fittings etc.removing materials to store for keeping in safe custody or for taking credit (credit for items shall be made as per conditions separatly) and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 187 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
