|
| 1 | Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. (i) 160 mm o/d |
| 2 | (i) 200 mm o/d |
| 3 | (i) 110 mm o/d |
| 4 | Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. for all type of soil except rocky |
| 5 | Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metre for sewers and manholes to full depths as shown in drawings, including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 metre, for all works other than connections to complete in all respects. A. For depths not exceeding 2.0 metre B.G.L. |
| 6 | Making the connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda Sewer connections upto 300 mm id |
| 7 | First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. |
| 8 | Dismantling interlocking pavers and relaying in same condition complete in all aspects. |
| 9 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete |
| 10 | Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type |
| 11 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick withcement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cementand making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects:-Inside size 75x120 cm and120 cm deep |
| 12 | Construction of brick masonry inspection chambers size as given below upto 0.60 metreaverage depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation,cement concrete 1:2:4 benching 12.50mm thickcement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm,455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of blackbitumastic paint conforming to I.S.I complete as per standard design.Size 450mm x 450mm insidewith RCC 455mm x 455mmcover and frame lightduty double seal |
| 13 | 12.5mm thick cement plaster 1:5. Please Enable Macros to View BoQ information |
