|
| 1 | (B/R PORTION)Excavation in trench not exceeding 1.5 M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 2 | Removing excavated material to a distance n exc 50M and deposited where directed at a level exc 1.5M but n exc 5 Km from starting point complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 4 | M&L 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete all as specified and directed. |
| 5 | Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in columns, pillars,piers,posts and struts all as specified and directed. |
| 6 | S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 7 | Material and labour for 6 mm to 10 mm dia TMT bars, cut to length bend to shape as required including cranking, hooking etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 8 | M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth without using extra cement mixed with use water proofing compound, surface finished even and smooth complete. Note : Water proofing compound shall be measured and paid separately as supply only. |
| 10 | Supply only integral water proofing compound complete all as specified and directed |
| 11 | Form work Use and waste to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed. |
| 12 | M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams ; plinth beams; bases for columns, etc ; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 13 | S&F mild steel Framed work as in doors or sliding gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-W(Gde-E-250) quality-A all as specified and directed. |
| 14 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified. |
| 15 | S&F Mild steel plates Fe-410-W(GdeE-250) quality B Mild steel, plain, sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed. |
| 16 | S&F Mild steel screw bolts (machine made) 16 to 20 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long all as specified and directed. |
| 17 | M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed |
| 18 | S&F 12mm thick clear toughened sheet glass for aluminium window/partition wall, exc 0.5 SQM in each pane complete all as specifed and directed |
| 19 | M & L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed. |
| 20 | M&L for Anodized aluminum frame for doors, windows, ventilators and partition with one or more rebate including joining cleat for fixing etc complete all as specified and directed.. |
| 21 | M & L 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars, window cills, cooking plate from and similar places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Please Enable Macros to View BoQ information |
| 22 | M & L 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars, window cills, cooking plate from and similar places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. Please Enable Macros to View BoQ information |
