|
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls build in CM 1:4 including demolition of old brick work all as specified and directed |
| 3 | M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6.0 m mean radius built in CM 1:6 including demolition of old brick work all as specified and directed. |
| 4 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | M&L for heavy duty light shade, anti-skid outdoor tiles of 8-10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm as in floor, providing durability, low porosity for extra wear, etc. set and jointed and pointed in chemical resistant mortar, resin type, in floors, over and including screed bed or beding layer of 15mm thick cement mortar for laying floor finish in CM 1:6 complete including demolition old tiles all as specified and directed. |
| 6 | M&L for heavy duty light shade, anti-skid outdoor tiles of 8-10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqm as vertical surfaces such as skirting, risers to steps,, providing durability, low porosity for extra wear, etc. set and jointed and pointed in chemical resistant mortar, resin type, in floors over and including rendering 10mm thick on fair faces of brick work or concrete surface back coat to wall tile in CM 1:4 complete including demolition old tiles all as specified and directed. |
| 7 | M&L non skid, coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match over and including screed bed or beding layer of 15mm thick cement mortar for laying floor finish in CM 1:6 including demolition old tiles all as specified and directed. |
| 8 | M&L glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10mm thick on fair faces of brick work or concrete surface back coat to wall tile in CM 1:4 complete including demolition old tiles all as specified and directed. |
| 9 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel (AZ-150) sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified including dismantling asbestos cement any type sheets including ridges in roof covering complete all as specified and directed. |
| 10 | All as per item No 8.00 above but plain sheeting, in ridges including dismantling asbestos cement, any type sheets including ridges in roof covering complete all as specified and directed. |
| 11 | S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 12 | M&L preparation of new or previously untreated surface of steel and iron surface of any description and any type and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | M&L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen VG-10 @ 1.2kg/sqm(paid separately) by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using butane torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 including Taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc, also two coat of aluminum paint over APP modified membrane after installing over the roof complete all as specified and as directed. |
| 14 | M&L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete roof slab at least for 72 hrs complete all as specified and directed. |
| 15 | M&L for cement concrete type B0, 1:2:4 using 12.5mm graded stone aggregate benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed. |
| 16 | M&L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. Note:- water proofing compound shall be measured and paid separately as supply only. |
| 17 | M&L for bituminous VG-10 @ 1.2 kg/sqm in each coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and directed |
| 18 | M&L for Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond ; for foundation, etc. or for shafts, wells , cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out soft/loose soil complete as directed by Engr in charge. |
| 19 | Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed |
| 20 | Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed |
| 21 | M&L for laying DWCP 200mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler including Demolition complete all as specified and directed. |
| 22 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 23 | M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed. |
| 24 | S&F in replacement solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 25 | S&F in repairs factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of mild steel tube for top and bottom mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails, lock rail &bottom rail, panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. |
| 26 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete complete all as specified and directed. |
| 27 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 28 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 29 | S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid plain glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note :- Wiremesh Shall be measured and paid separetely. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 31 | S&F butt hinges 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 32 | S&F for 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed. |
| 33 | S&F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in charge. |
| 34 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 35 | S&F in repairs vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed. |
| 36 | S&F in repairs vitreous china urinal half stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed. |
| 37 | S&F chrominium plated health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and directed. |
| 38 | S&F vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed. |
| 39 | S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) all as specified and directed. |
| 40 | S&F in repairs 15 mm pillar taps, cast copper alloy, with capstain head chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete all as specified and directed. |
| 41 | S&F of PVC low level flushing cistern of 10 litres capacity with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed. |
| 42 | S&F soap dish holder of bootom chromium plated and glass holder for soap complete all as specified and directed. |
| 43 | S&F in repairs stainless steel overhead square shower of size 200mmx200mm with arm and fixed to 15mm dia pipe complete all as specified and directed. |
| 44 | S&F 15 mm angle valve stopcock, cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 45 | S&F in repairs 10mm thick corner glass shelf (with bracket) of 10'' radius complete all as specified and directed. |
| 46 | S&F in repairs 15 mm bib taps, cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 47 | S&F PVC connections 15mm size with PTMT nuts of length 600mm as in repairs all as specified and directed. |
| 48 | S&F in repair to 15 mm bib, cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed. |
| 49 | S&F 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 50 | S&F 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 51 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 52 | S&F in repair 75 mm PVC(SWR) pipes, single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed. |
| 53 | S&F in repair PVC(SWR) 110mm pipes Single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes any size or pattern complete all as specified and directed. |
| 54 | S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed. |
| 55 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 56 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 57 | S&F of 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed. |
| 58 | S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed. |
| 59 | S&F of 75 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed. |
| 60 | S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed. |
| 61 | M&L in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd. |
| 62 | S&F of 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed. |
| 63 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and directed. |
| 64 | S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks complete all as specified and directed. |
| 65 | S&F of 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed. |
| 66 | Deduct Schedule of credit (calculation will be done off line) Rs. 11445.00 Please Enable Macros to View BoQ information |
