|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR TO FLOORING, PLASTERING, PLUMPING, WKS, PERIODICAL SERVICES AND MISC REPAIR IN JWG AREA UNDER AGE B/R-III Contract No : GE/PNH-111/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION;-Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 3 | Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and as directed.. |
| 5 | Dismantling wall/ceiling board (fibre, pulp, insulation, etc) or insulation board, slabs/ blankets, of any thickness, including cover fillets complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. |
| 7 | 4 mm thick E-board with and including fixing to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including fixing of E-board as per manufacturer instructions complete all as specified and directed. |
| 8 | Hollow PVC wall Lining / panelling consisting of 5mm thick plain colour PVC sheet including PVC fillets as per manufacturer instructions and fixing at site complete all as specified and directed |
| 9 | 50mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 10 | Chequered cement concrete tiles with grey cement and pigment 300x300x 25mm thick, set & jointed in neat cement slurry in floors and pointed with grey cement mixed with pigments, laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed |
| 11 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 12 | All as per item No.10 but in vertical surfaces such as skirtings, dados and risers to steps etc including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 13 | Rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | Rendering 15 mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified. |
| 15 | Applying two coats of cement base paint (in any pattern with multi colour) on walls over a coat of primer including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.Note:- Pattern and colour shall be approved by GE. |
| 16 | Preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed |
| 17 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 18 | Dismantling mild steel or wrought iron work of any description, complete all as specified and directed. |
| 19 | Dismantling of timber scantling 40sqcm and over in section, as in any position, complete all as specified |
| 20 | Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 21 | Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws as specified. |
| 22 | Mild Steel rolled section in purlin, main and cross beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250 quality A) all as specified and direcetd. |
| 23 | Mild steel as in flat iron for wind ties for roof, for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 24 | Second class Hard-wood in scantlings , clean sawn timber framed and fixed, all as specified and directed |
| 25 | Taking down shutter of any description, not exc 1.0 sq.m each, complete all as specified and directed. |
| 26 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame), complete all as specified and directed. |
| 27 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) , complete all as specified and directed. |
| 28 | 2nd class HW plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints. |
| 29 | 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat complete all as specified and as directed. |
| 30 | 30 thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed by engr in charge. |
| 31 | Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified. |
| 32 | Mild steel butt hinges, medium weight, cold rolled,75mm long, complete all as specified. |
| 33 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 34 | Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed. |
| 35 | Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 36 | Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 37 | 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 38 | Preparation of wood and wood based surfaces over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 39 | Figured glass, pin headed type, 3mm thick & glazing with oil putty n. exc 0.5 sqm in each pane complete all as spd & directed . |
| 40 | Preparation of steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome primer complete all as spd & directed. |
| 41 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 42 | Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts ,plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed. |
| 43 | Plain cement Concrete 1:3:6 type-C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts ,plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified and directed. |
| 44 | Preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash on walls complete all as specified and directed. |
| 45 | Preparation of old plastered or unplastered surfaces of walls and applying one coat of cement base on walls complete all as specified and directed. |
| 46 | Taking up or down steel tubing of 15mm bore , medium grade, including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 47 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 48 | Bib tap fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed in repairs, complete, all as specified and directed. |
| 49 | Stop valve/angle valve cast copper alloy,chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repair complete, all as specified and directed. |
| 50 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 'S' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified and directed. |
| 51 | S&F in repairs PVC low level flushing cistern of capacity 10 Litres with all internal fittings including flush pipe and fixing to supply pipe complete all as specified and directed. |
| 52 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair, complete all as specified and directed. |
| 53 | Pillar taps 15mm bore, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and directed. |
| 54 | S&F in repairs 32mm bore PVC waste pipe, complete all as specified and directed. |
| 55 | Vitreous china bowl urinal flat back small- normal, size of 465X355X265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement etc excluding flushing cistern, flush pipe and waste pipe, fixed in repair, complete all as specified and directed. |
| 56 | Supply and fixed in repair 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 57 | Dismantling water tanks of any size or capacity above 500 ltr but n exc 1000 Ltr and removing to store complete all as specified and directed. |
| 58 | Rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with threaded closed top), ISI marked, hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs complete all as specified and as directed. |
| 59 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm dia, ( Minimum Wt 210 gms) complete all as specified and directed. |
| 60 | Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed. |
| 61 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 62 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 63 | PCC 1:4:8 (nominal mix) type D-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete complete all as specified and directed. |
| 64 | Walling of random rubble stone masonry , well bonded, bedded and solidly hearted, built in cement mortar (1:6), brought upto course complete all as specified and directed. |
| 65 | All as per Item No.63 above but except stone |
| 66 | Brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 67 | Precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in bond stones walling, bed plates, anchorage blocks etc and set in CM 1:6 complete all as specified and directed. |
| 68 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of randow rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 69 | Boulder filling dry, as in backfilling for retaining wall complete all as specified and directed. |
| 70 | Flush pointing to random rubble masonary, in CM 1:3 complete all as specified and directed. |
| 71 | S&F in repair 110 mm PVC (SWR) pipes, Type B, single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed. |
| 72 | Plain cement concrete 1:2:4 type B-2,(using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 73 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified. |
| 74 | Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in hard/dense soil, returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 75 | Supply only chain link MS galvanised fencing, any type or size complete all as specified and directed. |
| 76 | Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. |
| 77 | S & F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 78 | Mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 79 | Mild steel screw bolts (machine made) 5 to 10mm dia of neck with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 80 | Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 81 | MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 82 | Cleaning/Disinfecting of PVC/ Cemented water storage tanks of any capacity with disinfecting chemicals (Chlorine) properly with water, thoroughly flushed out, complete all as specified and directed by Engr-in-Charge |
| 83 | 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. |
| 84 | Sand filling under floors including watering and consolidation, compelte all as specified and directed. |
| 85 | Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed. |
| 86 | Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade complete all as specified and directed. |
| 87 | Cleaning of blocked Water Closet any type/pattern (pedestal/squatt pattern) upto 1st manhole and making the drain pipe of any size full functional by flushing with water to entire satisfaction of Engr-in-Charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n.exc 50m and burring the same in pits complete all as directed by Engr-in-Charge.(Measurement will be carried out each time depend on blockage). |
| 88 | Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sluding / de-watering contaminated waste materials (liquid sludge) alongwith solid waste from septic tank and soakage wells/pits of any capacity/depth by mechanical pumping (Truck mounted mechanically operated machine or as directed by the Engr-in-charge) to make it fully functional to entire satisfaction of Engineer-in- charge and removing & depositing the sludge outside the periphery of defence land at a minimum distance of 50 m from nearby living accn and burrying in borrow pits including covering with fresh mud and refixing the cover after cleaning / removing the liquid waste material of septic tanks / soakage wells / pits including cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces complete all as specified and directed by Engr-in-Charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
