|
| 1 | S/I/T/C of New 80 HP VT Pump Set |
| 2 | Supplying,installation,Testing and Commissioning of VT Pumpset (confirming to IS1710:2021 standards) with 35 ft suitable size MS column pipe assembly in random length of 5 ft.(Make-JYOTI/WPIL/KIRLOSKAR) with SS/Bronze Impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft TEFC IE3,IP55 type Squirrel Cage Induction Motor (Make-Siemens/Crompton/ABB) operating on 3 Phase 50 Hz,415V+- 10% supply and having speed 1400-1500 RPM (BHP of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories |
| 3 | Repairing of 80 HP VT pump set at raw water |
| 4 | Supplying all labour tools and tackles for taking out the 40HP VT pump set with bowl assembly, column pipe and line shaft etc. |
| 5 | Cost towards dismantling of complete bowl assembly. |
| 6 | Cost towards repairing and fitting the parts of VT Pumpset as per requirement (Works as Complete Overhauling of the pump) such as:-1.Machining/Lathe work 2.Changing SS Top Shaft,Line Shaft(2 Nos of 5 feet) of and Bottom Shaft2.Repairing of Bowl assembly and Impleller3.supplying and fitting C.l spider bearing with rubber cut less bush-4Nos4.Supplying and fitting of worn-out nut-bolts,Bolt-Nut washer,Gland body bush machining,Other machining works,etc as per requirement |
| 7 | Complete assembling the pump set and lowering including supplying all petty materials. |
| 8 | Cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 Amp Contactor-2 No (for 1 No Starter)160 Amp,Breaking Capacity -36kA MCCB – 1 No56-90 A Electronic overload relay-2 NosTimer-2 NosVolt Meter – 1 NosAmp Motor – 1 NosPilot Lamp – 6 NosSelector Switch – 4 NosSingle Phase Preventer – 2 Nos[ All accessories of reputed make]With complete internal wiring with suitable size of copper wire and testing on load. |
| 9 | Repairing of 30HP C/F pump sets at clear water |
| 10 | Cost for dismantling of 30 HP C/F and Pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, C.I bearing housing with cap -1 set, Ball bearing 6306 (SKF)-2 Nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc. |
| 11 | Cost towards complete repairing of Motor control panel starter 30HP CF pump set opening and changing of damaged parts such as 1.MCCB - 50 Amp,25KA,3Pole-2 Nos (For Motor Backup Protection),MCCB -100 Amp,50KA,3Pole-1 No (Main MCCB)2.Overload Relay 26-40 Amp-1No3.Star delta timer-1No4.Digital Volt meter,Ampere meter,Three pahse indicator lamp,Push Button ON/OFF,ON/OFF/TRIP Indicator,Wiring,etc as per required |
| 12 | Repairing of 15HP C/F pump sets at clear water |
| 13 | Cost for dismantling of 15HP C/F and Pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, C.I bearing housing with cap -1 set, Ball bearing 6306 (SKF)-2 Nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc. |
| 14 | Cost towards complete repairing of Motor control panel starter 30HP CF pump set opening and changing of damaged parts such as 1.MCCB -25 Amp,15KA,3Pole-2 Nos (For Motor Backup Protection),MCCB -50 Amp,25KA,3Pole-1 No (Main MCCB)2.Overload Relay 20-25 Amp-1No3.Star delta timer-1No4.Digital Volt meter,Ampere meter,Three pahse indicator lamp,Push Button ON/OFF,ON/OFF/TRIP Indicator,Wiring,etc as per required Please Enable Macros to View BoQ information |
