|
| 1 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or less consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed. |
| 2 | M&L for Premix bituminous, macadam (consolidated thickness 75mm or more consolidated with 4% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver and rolled with 8 to 12 tonne power roller to gradient and camber required all as specified and directed. |
| 3 | Preparing existing black top surfaces by brushing with wire brush, for removing caked mud, etc sweeping with broom & finally fanning the cleaned surface with gunny bag to remove loose dirt and applying evenly tack coat of paving bitumen VG-10 @ 5Kg per 10 Sqm. Complete all as specified and directed.. |
| 4 | M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity complete all as specified and directed. |
| 5 | M&L for prepration of road surfces and applying thermoplastic reflective paint marking 2.5 mm thick single coat as in lines, dashes, arrows, letters, zebra crossing of 100/150 mm wide on roads pavements with HOT applied thermoplastic modern propelled road marking machine incl all necessary ingredients such as binder, glass beads . titanium dioxide calcium carbonate inter fillers thermoplastic requirements for glass beads shall be table No 8004 of MORTH speccification incl spraying of glass beads etc complete all as per manufactures instruction and as directed.NOTE: Application shall be carried out through mechanical appliances by the approved applicator of the manufacturer of paint. |
| 6 | S&F in repair solar road studs of size 125mm x 125mm x 20mm, aluminium alloy & polycarbonate stud (Red/yellow LEDs) 3+3 LED's with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long, complete as per MORTH/IRC specifications |
| 7 | S&Fin repair aluminium rod stud two way reflective dimension 110mm x 128mm x 30 mm aluminium alloy body reflective panel amber/ red and weight 530 gms complete aluminium coated of approved make fixed with epoxy |
| 8 | Demolition of cement concrete any description and in any position and removal of demolished material out side of defence land not otherwise specifically provided for complete all as specified and directed. |
| 9 | M&L hardcore of gauge n.exc. 63mm of broken stone boulders n exc 100 mm deposited, spread and levelled in layers watered and rammed to a true surface for hard standing |
| 10 | M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed. |
| 11 | M & L for Sand filling under floorings/pavement spread and levelled in layers n.exc 15 cm thick complete including watering and consolidation complete all as specified and as directed. |
| 12 | M & L of Machine pressed precast conctete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade (R) with Grey cement and pigment complete all as specified and as directed. |
| 13 | M&L cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in coping complete all as specifed and directed. Please Enable Macros to View BoQ information |
| 14 | M&L cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in coping complete all as specifed and directed. Please Enable Macros to View BoQ information |
