|
| 1 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 2 | Dismantling tiled roofing (mangalore or pot or country tiles) with battens etc. complete including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 3 | Dismantling wood work of sectional area 40 sq.cm. and above wrought framed and fixed in frames other frames and trusses including stacking of material within 50 mts. lead (span upto 10 mtrs.) |
| 4 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 5 | Removing white or colour wash by scrapping sand papering and preparing surface smooth including necessary repairs to scratches etc. complete. |
| 6 | Dismantling rolling shutters top covers and shafts etc. for replacement of springs ball bearing complete and refixing the shutter after replacement of springs and ball bearing(cost of replacement parts excluded) including all labour and returning the unserviceable parts to the department complete. |
| 7 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 8 | Steel work in single sections (SAIL TATA.VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting hoisting fixing in position and applying a priming coat of red lead paint.;In R.S. joists channels angles tees |
| 9 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
| 10 | Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins rafters trusses flashings etc. complete as per the directions of the Engineer in charge. |
| 11 | Proving ridges or hips of width 60 cm over all in plain G.I. sheet fixed with galvanized iron J or L hooks bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete; 0.80 mm thick sheet. |
| 12 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts nuts and flat iron brackets 40 x 3 mm size complete.;140 mm nominal size |
| 13 | Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. Complete (single/double) socketed:; 110 mm dia |
| 14 | Extra for providing and fixing prince or equivalent make PVC SWR stop end outlet with one clamp for socketed half round eaves gutters.;140 mm nominal size |
| 15 | Extra for providing and fixing prince or equivalent make PVC SWR short stop ends for socketed half round eaves gutters.;140 mm nominal size |
| 16 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 17 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on old work to give an even shade. |
| 18 | Supplying and fixing rolling shutters of approved make made of 80 x 1.25 mm M.S. laths interlocked together through their entire length locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25 mm thick for folling shutterstop cover and spring. and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25 mm thick for folling shutterstop cover and spring. Please Enable Macros to View BoQ information |
