|
| 1 | Material and labour for hard core of broken bricks gauge n. exc 63 mm, deposited spreaded and leveled in layer not exc 15 cm thick, watered and rammed to a true surface, broken stone or boulder complete all as specified and directed. |
| 2 | Excavation in trenches not exceeeding 1.5 m wide and not exceeding 1.5 M deep for foundation and getting out in hard /dense soil complete all as specified and directed. |
| 3 | Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm (soil) complete all as specified and directed. |
| 4 | Removing excavated materials not exc 50 Metre and depositing where directed at a level not exceding 1.5 M above the starting point (soil) complete all as specified and directed. |
| 5 | Material and labour for Cement concrete 1:4 :8 type D2 using using 40mm graded stone aggregate as in filling, fdn, mass concrete and sub base of floors etc complete all as specified and directed. |
| 6 | Material and labour for precast cement concrete block masonary exc. 10 cm width with solid block type C1 (1:3:6) using 20 mm graded stone aggregate and setting in cement mortar (1:4) complete all as specified and directed. |
| 7 | M&L Plain Cement Concrete (1:3:6) Type C-2 using 40 mm graded aggregate for as in fdn or mass concrete all as specified and directed . |
| 8 | Material and labour for Plain Cement Concrete (1:2:4) Type B-1 using 20 mm graded aggregate as in coping complete all as specified and as directed. |
| 9 | Material and labour for Reinforced cement concrete 1:1.5:3 (Nominal mix) using 20mm graded stone aggregate as in Cantle Beam, Roof beam, Tie beam, Coping etc. complete all as specified and directed. |
| 10 | Material and labour for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, urinal partitions and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding edges complete all as specified and directed. |
| 11 | Formwork to sides of Cantilever Beams, Roof beam , lintels fair finished complete all as specified and directed . |
| 12 | Taking down chowkats or frames with shutters (without) taking of shutters) from the frame exceeding 1.5 but not exceeding 4 Sqm each complete all as specified and directed. |
| 13 | Providing & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 105mm x 65 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 850 kg/ cbm & manufactured by \\"SMP-IMPEX\\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity of Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 with property of being termite / borer proof , water / Moisture Proof & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length complete all as specified and directed. |
| 14 | Providing & Fixing Factory Made 30 mm thick 100% Solid WPC ( Wood polymer Composite ) Decorative /Laminated / Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum compressive strength of 50 N/mm2, Modulus of elasticity 850N/mm2 with Property of being Termite/ Borer Free, Water/ Moisture Proof & fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. |
| 15 | Providing & Fixing factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 90mm x 45 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer, Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having good screw holding capacity of Min. 990 N) with property of being termite / borer proof , water / Moisture Proof & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, , all as per specifications drawings complete all as specified and directed. |
| 16 | Providing & Fixing Factory Made 25 mm thick 100% Solid WPC ( Wood polymer Composite ) decorative /Laminated / Plain Flush Door Shutter of required size comprising of virgin PVC resin, Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC sheet Single Extruded (Inner) having good screw holding capacity with Property of being Termite/ Borer Free, Water/ Moisture Proof & fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. |
| 17 | Supply & Fixing 75mm auto concealed hydraulic stainless steel spider/butterfly hinges suitable for cupboards complete all as specified and directed. |
| 18 | Supply & Fixing for 100mm size handles of stainless steel fixed with screws complete all as specified and directed. |
| 19 | Supply & Fixing for aluminium anodized barrel tower bolts 200mm of extruded section complete all as specified and directed. |
| 20 | Supply & Fixing for aluminium anodized handles 150mm long complete all as specified and directed. |
| 21 | Supply & Fixing for 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy complete all as specified and directed. |
| 22 | S&F floor door stopper of aluminum alloy body 140mmcomplete all as specified and directed. |
| 23 | Supply & Fixing in repairs 100mm Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 24 | Material and labour for Steel work in tubular trusses including special/any shaped required at site with washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, incl welding, drilling to RCC pillar all complete all as specified and directed. |
| 25 | Material and labour for Expanded metal not.exceeding 4kg, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed. |
| 26 | Supply and fixing in repair stainless steel (Grade 304) railing made of hollow tubes, S&F channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 27 | Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars complete all as specified and directed. |
| 28 | Material and labour for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or twisted bars as in stirrpus/spacers complete all as specified and as directed. |
| 29 | Supply & Fixing for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 30 | Supply & Fixing for Fibre glass reinforced translucent corrugated sheeting of any colour with two corrugations or plain 2mm thick side lap fixed with coach screw and washer in iron pipe or framed as in roofing/wall covering etc complete all as specified and directed. |
| 31 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 32 | Supply & Fixing for Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed or bedding layer of mortar 1:4 complete all as specified and directed. |
| 33 | Supply & Fixing for Non - skid Ceramic colouerd tiles 7 to 8 mm thick (square/ rectangular) of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 34 | Material and labour for glazed ceramic coloured tiles (premium quality) 450x350 or 350x250 x6-7mm thick coloured on vertical surfaces such as dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , including 10 mm thick cement plaster in Cement Mortor 1 :4 complete all as specified and directed. |
| 35 | Material and labour for for Sadarhalli stone polished (Marble pattern) 20-25mm thick machine cut as laid over & including 15mm thick rendering in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match and incl polishing complete all as specified and directed. |
| 36 | Material and labour for Heavy duty vitrified tiles 12mm thickness area not exceeding 0.18 Sqm of each tiles, set and jointed and pointed in neat cement slurry in floors with grey cement and pigments over 20mm thick screed bed in Cement Mortor 1:4 complete all as specified and directed. |
| 37 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 38 | Material and labour for PCC 75mm thick, 1:4:8 type D-2 40mm stone aggregate as in sub base of flooring complete all as specified and directed. |
| 39 | Taking down cement plaster on brick work or stone walls etc incl raking out joints hacking for key scrubbng down with water complete all as specified and directed. |
| 40 | Material and labour for Rendering 15mm thick Cement Mortor (1:4) on block masonry surface, finshing the surface even and smooth without using extra cement complete all as specified and directed. |
| 41 | Material and labour for Complete removal of old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applaying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,building height upto 15.00 mtr complete all as specified and directed. |
| 42 | Material and labour for complete removal of existing treatment of wall and applying two coat of distemper oil emulsion over a coat of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. |
| 43 | Material and labour for complete removal of existing treatment of ceiling and applying two coat of distemper oil emulsion over a coat of wall care putty to obtained smoothness of plastered surfaces complete all as specified and directed. |
| 44 | Material and labour for preparation steel surfaces with two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 45 | Material and labour for Preparation of old painted surfaces of steel work of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint complete all as specified and directed. |
| 46 | Material and labour for Preparation of old painted surfaces of wooden work of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint complete all as specified and directed. |
| 47 | Supply & Fixing in repair sinks without drainage board made of stainless steel 1mm thick kitchen with Steel waste coupling 40mm with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 48 | Supply & Fixing for Brass chromium plated bottle traps 40mm for sinks/wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap all as complete fixing arrangementcomplete all as specified and directed. |
| 49 | Supply & Fixing for 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 including complete fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 50 | Supply & Fixing for15mm CP fancy type angle cock concealed type screwed for iron pipe or for brass ferrules complete all as specified and directed. |
| 51 | Supply & Fixing for PVC connection 15mm dia and 450mm long complete all as specified and directed. |
| 52 | Supply & Fixing for 15mm bore fancy type Bib tap Chromium plated fancy type long shanks and flynuts screwed for iron pipe complete all as specified and directed. |
| 53 | Supply & Fixing for PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to floor/trenches complete all as specified and directed. |
| 54 | Supply & Fixing in repair for PVC (SWR) 75mm junction single, bends complete all as specified and directed. |
| 55 | Material and labour for preparation of plastered wall surfaces and applying two or more coats of texture exterior paint of required shade applied @ 3.28 ltr/ 10 Sqm over and including primimg coat of exterior primer @ 2.20 kg/10Sqm complete al as specified and directed. Note :- Colour, pattern and design complete all as specified and directed. |
| 56 | Material and labour for Preparation of old decorated surfaces of wall or RCC Jallies by washing, rubbing down and stopping of painted surfaces and applying two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm,building height upto 15.00 mtr complete all as specified and directed. |
| 57 | Taking down submain wiring any size) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 58 | Material and labour submain wiring /Circuit wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Conduit/Casing capping with accessories fixed on wall /ceiling with GI screws complete with 2x 2.5 Sqmm +1x 2.5Sqmm for earth continuity conductor complete all as specified and as directed. Note:- 3 Runs of 2.5 Sqmm copper conductor and 1 run of PVC conduit/casing capping will be measured as one unit length. |
| 59 | Supply & Fixing for MCB distribution board SPN 2 way single door 240V etc complete all as specified and as directed.. |
| 60 | Supply & Fixing for MCB SPN 6 to 32 Amps10 KA 240V 50HZ, ISI Marked complete all as specified and as directed.. |
| 61 | Supply & Fixing for Decorative Wall light for name plates for fixed on wall of 40 W warm type, Complete hanging arrangement with pendent holder frames and fixing accessories complete all as specified and as directed. |
| 62 | Supply & Fixing in repair MCB distribution board SPN 8 way single door 240V powder coated with 200 Amps rated bus bar neutral link etc complete all as specified and as directed.. |
| 63 | Material and labour in replacement submain wiring /Circuit wiring with PVC insulated, single core, multi stranded, 1100 volts grade unsheathed copper conductor cable in and including PVC Conduit/Casing capping with accessories fixed on wall /ceiling with GI screws complete with 2x4 Sqmm +1x 4 Sqmm for earth continuity conductor complete all as specified and as directed. Note:- 3 Runs of 4Sqmm copper conductor and 1 run of PVC conduit/casing capping will be measured as one unit length. |
| 64 | Material and labour for cutting road / hard standing to depth not exceeding 60 CM and to width not exceeding 45 CM for laying HDPE Pipes and making good the disturbed surfaces by 1:3:6 type C1 using 20 mm graded stone aggregate complete all as specified and as directed . |
| 65 | Supply and laying High density polyethylene pipes(HDPE) of 32 mm dia pressure rating 6 kgf/cm2 laid in trenches and fixed on poles complete all as specified and directed. |
| 66 | Material and labour in replacement PVC insulated,PVC round sheathed multicore industrial copper cable of size 3 Core ,1.5 Sqmm for voltage grade upto 1100 V,as per IS 694 complete all as specified and directed. |
| 67 | Demolition of plain cement concrete of any description and in any position complete all as specified and directed. |
| 68 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl Nainital or similar pattern roof covering complete all as specified and directed. |
| 69 | Demolition of stone/boulder , brick/PCC block masonry work built in cement mortar complete all as specified and as directed. |
| 70 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 71 | Demolition of reinforced cement concrete in ground floor and paving (reinforcement has to cut as required to facilitate demoliton) complete all as specified and directed. |
