|
| 1 | Excavating in post holes(or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard / dense soil all complete as specified and directed. |
| 2 | Material & Labour for Hardcore of gauge 12.5mm chips, deposited, spread and levelled in layers not exceeding 15cm thick, watered, compacted and rammed to a true surface complete as specified and directed. |
| 3 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard / dense soil complete as specified and directed. |
| 4 | Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations,filling and mass concrete complete as specified and directed. |
| 5 | Returning,filling,including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete as specified and directed. |
| 6 | Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete as specified and directed. |
| 7 | Material & Labour for cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed. |
| 8 | Material & Labour for pre cast cement concrete block masonry type C1 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete as specified and directed. |
| 9 | Material & Labour for Plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating and including necessary use and waste of form work complete as specified and directed. |
| 10 | Material & Labour for Reinforced cement concrete (designmix) M-25 in Foundations, including rafts, footings, foundation, beams, plinth beams, bases for colunms, etc complete as specified and directed. |
| 11 | Material & Labour for Reinforced cement concrete (designmix) M-25 as in columns complete as specified and directed. |
| 12 | Formwork to sides of concrete foundations, footings, bases of columns,raft and raft beams sides and soffits (ifany) of foundation and plinthbeams and similarwork, vertical or to batter with rough finished surfaces of concrete complete as specified and directed. |
| 13 | Use and waste formwork to sides of pillars, posts, struts,piers,columns complete with fair finished surfaces complete as specified and directed. |
| 14 | Supply and fix wire netting of SS/ Fibre wire mesh 0.91 mm dia size of mesh 12 mm on wall surfaces to receive plastering fixed with tinned tacks of wire staples complete as specified and directed. |
| 15 | Supply and fix post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh or etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 and E-165 complete as specified and directed. |
| 16 | Supply and fix 10 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square exceeding 10 cm long and not exceeding 15 cm long complete as specified and directed. |
| 17 | Material & Labour for round bars for 10mm dia and over cut to lengths, bent to shape required including cranking, bending etc and binding with mild steel wire (annealed) not less than 0.9mm dia complete as specified and directed. |
| 18 | Material & Labour for TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete as specified and directed. |
| 19 | Material & Labour for TMT bars 5 mm dia and over upto and including 10mm dia in stirrups,spacers and binders etc complete as specified and directed. |
| 20 | Framed work as in door or gates of angle or other sections with gusset plates,rails,braces etc complete, drilled for fixing of steel sheeting etc and prepared for hanging or sliding with and incl either hook and hinges with locking arangement etc (Fe-410, GdeE-250, quality A) complete as specified and directed. |
| 21 | Supply only PVC Coated chain link fencing of mesh size 2\\"x2\\" - 5mm Thickness/6 SWG, (Minimum wt more than 5kg/sqm) of 12 -16 ft Height (colour as specified) including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. Including proivision of binding wire complete as specified and directed. |
| 22 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. Including proivision of binding wire complete as specified and directed. |
| 23 | Supply & Fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed. |
| 24 | Material & Labour for Providing and laying at or near ground level factory made kerb stone wall of M-25 grade cement concrete in position (Size as specified) to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 25 | Material & Labour for Machine pressed precast concrete rubber moulded interlocking paver block (With Grey cement and colour pigment) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete as specified and directed. |
| 26 | Material & Labour for 15 mm thick rendering CM 1:4 on other than fair faces of brick work or concrete surfaces etc finished even and smooth without using extra cement complete as specified and directed. |
| 27 | Taking down cement plaster on brick/ concrete/ stone in ceilings, walls, roof slab etc including racking out Joints, hacking for key, scrubbing down with water, etc complete as specified and directed. |
| 28 | Material & Labour 10 mm thick rendering Cement Mortar 1:4 on other than fair faces of brick work or concrete surfaces etc finished even and smooth without using extra cement complete as specified and directed. |
| 29 | Rendering 10mm thick in cement mortar 1:4 on brickwork or concrete surfaces finished even and smooth without using extra cement complete as specified and directed. |
| 30 | Material & Labour for new plastered surfaces including preparation of surfaces and applying two coats of cement paint over a coat of alkali resistant primer complete as specified and directed. |
| 31 | Material & Labour for old plastered surfaces including preparation of surfaces and applying one coat of cement paint complete as specified and directed. |
| 32 | Material & Labour for painting steel and iron work of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide (Zinc chrome) primer complete as specified and directed. |
| 33 | Material and labour for preparation and painting on new steel/ iron surfaces of any description by priming with red oxide and applying two coats of synthetic enamel paint , not exceeding 10 cm in width of girth when unconnected with other painting or when paintin in a different tint complete as specified and directed. |
| 34 | Material & Labour for two coats Painting lines, dashes, arrows, letters, etc. on pavements, play ground, roads and the like including preperation etc for exceeding 10cm wide with road marking paint/ PU Painting, white or golden yellow all as specified and directed. |
| 35 | Preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete as specified and directed. |
| 36 | Dismantling fencing wire mesh, any type complete as specified and directed. |
| 37 | Dismantling wrought iron or mild steel work, barbed wire of any description not other wise provided for including stacking, loading etc complete as specified and directed. |
| 38 | Demolition of cement concrete in foundation or other wise specifically provided for complete as specified and directed. |
| 39 | Demolition of Stone slabs and paver tiles of any description or thickness in floors, aprons etc laid on dry mortar complete as specified and directed. |
| 40 | Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but complete as specified and directed. |
| 41 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings (Corrugated, semi corrugated, etc) sheets in roof coverings incl ridges complete as specified and directed. |
| 42 | Removing soil/ building materials/ debris etc. to a distance of 15km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination away from the defence land complete as specified and directed. |
| 43 | Demolition of cement concrete (reinforced) or other wise specifically provided for complete as specified and directed. |
| 44 | Separating, scraping and cleaning of reinforcement from Reinforced Cement Concrete complete as specified and directed. |
