|
| 1 | Supplying& Delivery At Site Of 11 Mt. GI Oclagonal Pole Including Arangement Of Monkey Ladder, Arms Fixing With Octagonal Cross Section And Contentiously Tapered With Single Longitudinal Welding.Total Length of The Pole Will Be 11 Mtr. Thickness Of Sheet Should Not Be Less Than 3 Mm, Diarneter Of The Polo At Bottom & Top Will Be 340 Mm And 150 Mm Respectively Base Plate 520 X 25mm. Pole Shafts Shall Be Provided With Fixed Flange Plate Of Minimum 16 Mm Thickness With A Provision Of Minimum 4 Nos Fixing Foundation Hot Dipped Galvanised Bolls. AlI Other Hardware I.E Nuts& Bolts, Washers, Spring Washers, Flats, Split Pins Elc. Should Be Hot Galavanised. (BAJAJ/ TRANSRAL/ Utkarsh/ CG/ Approved Make.) |
| 2 | ERECTION OF 11 MTR HIGHMAST WITH MODERN ENGINEERING PRACTICES WITH TESTING AND COMMISIONING ALL |
| 3 | Making Of RCC Foundatlon With M20 Grade Of Concrete (6:3:1)With Graded Stone Chips (20mm Normal Size) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant IS Codes For Soil Bearing Capacity Of 8 To 10 Ton/Sqm At A Depth Of 1.00m To 1.50m, Collaring Shall Be 200mm Above The Ground Level. |
| 4 | Supplying Fitting And Fixing 1.1 KV Grade 10 sq Mm 2 Core PVC Insulaled Armour Amounted Alluminium Conductor Cable For Hanging Make - Havells /Pollycab / KEIIGlostar OR Equievalent |
| 5 | Laying Of One No. Cable Upto 35 Sqmm In Underground Trench 460 Mm Wide X 760 Mm Average Depth, With Brick Protection On The Top Of The Cable With 8 (Eight) Nos. Bricks Per Metre, Including Filling The Space Shifted Between The Brick & Cable And Also The Trench shifted Soil, Leveling Up And Restoring Surface Duly Rammed |
| 6 | Supplying And Fixing 32 Amp MCB DP.240 V(Havells/Slandard/Anchor/Legrand) |
| 7 | Supply And Fixing Manual Timer 24 Hours And Sintex Box With Conductor.6-10 A Mcbsp C Type Toggole Switch, Fixed On Sintex Box on Pole Including supply And Insrtallation With Nut Bolt Clamp. |
| 8 | Supply & Fixing Of LED Flood Light Luminaries 150W LED (IP65 With Eticiency > 100 Lumen/ Watt And < 20% Lumen Depreciation Over Min. 2 Years) With Pressure Die Cast Aluminium Housing And Heat Resislant Toughened Flat Glass Complete Of Approved Make With Constant Current LED Driver. Make - Crompton Or Equivalent Make Of Philips/ Havells/ Bajaj/ Magik/ Orient/ HPL/ HALONIX (PWD APPROVED) |
| 9 | Supplying And Drawing 1.1KV Single Core Standard 'FR' PVOC Insulated & Unsheathed Single Core Stranded Copper Wire (Brand Approved By EIC) Of The Following Sizes In 19mm Sia 3mm Thick Polythene Pipe And By The Prelaid GI Fish Wire And Making Necy. Connection As Required 2x36/0.3(2.5sqmm) + 1x22/0.3(1.5 Somm) As ECC(From Loop To Fitings) |
| 10 | Supplying And Fixing Compression Type Gland Complete With Brass Gland, Brass Ring & Rubber Ring For Dust & Moisture-Proof Entry Of XLPE/PVC ArmouredCables For Following XLPE/PVC ArmouredCable. 2C 10 Sgmm |
| 11 | Finishing The End Of Following XLPEIPVC Armoured Cables By Crimping Method Incl. Supplying And Fixing Solderless Socket (Dowels Make), Tapes, Anticorrosive Paste & Jointing Materials: 2C 10 Sqmm |
| 12 | Earthing By 50mm Dia ISI-Medium Gl Pipe 3.64 Mm Thick X 3.04 Mts. Long And 1X4 SWG GI (Hot Dip) Wire (4 Mts. Long), 13 Mm Dia X 80 Mm Long GI Bolls, Double Nuts, Double Washers Incl. S &F 15 Mm Dia GI Pipe Protection (1 Mts. Long) To Be Filled With Bitumen Partly Under The Ground Level And Parly Above Ground Level Driven To An Average Depth Of 3.65 Mts. Below The Ground Level |
| 13 | Excavation of soil for installation of Earth Electrode and filling & ramming.For Morrum Soil |
| 14 | Providing & Flxing GLOW SIGN Board(2.5\\"*3.5\\") For Name And Details Of The Work As Per Dlrectlon Of The Engineer-In Charge. |
| 15 | Sub Total |
| 16 | GST 18% |
| 17 | CESS 1% Please Enable Macros to View BoQ information |