Tender For Providing & Laying Of Synthetic Track At Mahila Park Near (Mini Stadium) Naraina, Ward No.139, Karol Bagh, Rajinder Nagar Constituency (Ac-39)., Delhi-Delhi
TDR : 54610147
Tender Notice
BOQ
2 Days Left
Delhi
Delhi
Tender For Providing & Laying Of Synthetic Track At Mahila Park Near (Mini Stadium) Naraina, Ward No.139, Karol Bagh, Rajinder Nagar Constituency (Ac-39).
Name of Work:- PROVIDING & LAYING OF SYNTHETIC TRACK AT MAHILA PARK NEAR (MINI STADIUM) NARAINA, WARD NO.139, KAROL BAGH, RAJINDER NAGAR CONSTITUENCY (AC-39).
Sl. No.
Item Description
1
PROVIDING & LAYING OF SYNTHETIC TRACK AT MAHILA PARK NEAR (MINI STADIUM) NARAINA, WARD NO.139, KAROL BAGH, RAJINDER NAGAR CONSTITUENCY (AC-39).
2
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
3
PROVIDING AND LAYING IN POSITION CEMENT CONCRETE OF SPECIFIED GRADE EXCLUDING THE COST OF CENTERING AND SHUTTERING - ALL WORK UP TO PLINTH LEVEL :1:5:10 (1 CEMENT : 5 COARSE SAND (ZONE-III): 10 GRADED STONE AGGREGATE 40 MM NOMINAL SIZE) (AS PER DIRECTION OF OFFICER IN CHARGE.)
4
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
5
PROVIDING AND LAYING SBR AND EPDM MIX RUBBER FLOORING OF 36MM THICKNESS OVER WELL LAYED CEMENT CONCRETE SURFACE AT SITE IN DESIGNS AND PATTERNS AS PER THE DIRECTIONS OF OFFICER IN CHARGE OF THE SITE USING GOOD QUALITY OF BINDER OR ADHESIVE . (AS PER DIRECTION OF OFFICER IN CHARGE.)
6
Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade :
7
Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm
8
Enhancement 17% on items of DSR 2018 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
