|
| 1 | SH-I ( Wiring) |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulatedcopper conductor single core cable etc. as required |
| 3 | Group-B |
| 4 | Wiring for circuit/submain wiring alongwith earth wire with the following size FRLS PVC insulated copper conductor single core cable in surface / recessed Medium class PVC conduit etc. as required. |
| 5 | 2 x 1.5 sq. mm + 1 x 1.5 sqmm earth wire |
| 6 | 4 x 1.5 sq. mm + 2 x 1.5 sqmm earth wire |
| 7 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 8 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 9 | Wiring for light/ power plug with 4X4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 10 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 11 | Supplying and fixing suaitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amp moduler socket outlet and 15/16 modular switch connection etc. as required. |
| 12 | Supplying and fixing of following sizes of Medium class PVC conduitalong with accessories in surface/recess including painting in case of surface codouit or cutting the wall and making good the same in case of recessed conduit as required. |
| 13 | 20 mm |
| 14 | 25 mm |
| 15 | Supplying and fixing brass batten / angle holder including connection etc as required . |
| 16 | Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in existing surface / recessed steel/PVC conduit etc. as required. |
| 17 | 3 x 1.5 sq. mm |
| 18 | 6 x 1.5 sq. mm |
| 19 | SH-II ( Distribution Board & MCBs) |
| 20 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) |
| 21 | 6 way, Double door |
| 22 | 8 way, Double door |
| 23 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Single pole |
| 25 | Double Pole |
| 26 | SH-III ( Cabling and other Misc work) |
| 27 | Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 28 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 29 | 3½ X 50 sq. mm |
| 30 | 3½ X 300 sq. mm |
| 31 | Providing, laying and fixing following dia G.I. pipe(medium class) in ground complete with G.I. fittingsincluding trenching (75 cm deep)and re-filling etc asrequired |
| 32 | 100 MM |
| 33 | SH-IV (Misc electrical work ) |
| 34 | Dismantling of the following sizes of PVC insulated PVC sheathed aluminium conductor armoured / unarmoured cable from the wall surface , from masonry open duct, cable tray and shifting the dismentled cable to store after measuring the making size wise roll proper round rolls size wise and their length as per the instructions of engineer in charge complete as required. |
| 35 | Cable Size up to 95 sqmm |
| 36 | Cable Size above 95 sqmm and up to 300 sqmm |
| 37 | Dismentling of Existing M.S cable tray of various sizes from surface of wall / ceiling and shifting the same in store / room as per the instruction of Engineer in charge complete as required at site . |
| 38 | Installation of Existing M.S cable tray of sizes up to 300 mm width on the surface of wall / ceiling with suitable size of nut bolts and existing supporting angle iron complete as required at site. |
| 39 | Fixing of following typ[e and rating dismantled switch geas/ MCBDBs like Change over switch / SFU / bus bar ron the existing angle iron frame on the wall i/c making inter connection testing etc as required at site. |
| 40 | 125 Amps 4 Pole on Load Change over switch with sheet steel enclosure. |
| 41 | 4 pole 125 Amps SFU with sheet steel enclosure |
| 42 | 6 way Vertical TPN MCBDB |
| 43 | Three phase and newtral 200 A Bus bar Chamber |
| 44 | SH-V ( Light Fittings) |
| 45 | SITC of 250 mm sweep Ventilating fan with plastic body and louvers i/c connection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as required at site. (M/s HAVELLS model Ventil Air DX or similar superior make, Other preferred makes Crompton Greaves/Usha/ Khaitan/Bajaj/Orient) |
| 46 | SITC of 150 mm sweep fresh air fan With plastic body and net i/c connection with 2x1.5 sqmm cu. Conductor FR PVC cable etc as reqd at site. ( M/s Havells Ventil Air Hush Ventil Air Hush Steel Finish or Equivalent model ofUsha,Bajaj,Khaitan , or other similar superior make ). |
| 47 | S/F of 7 watt LED Bulb in the existing batten / angle holder i/c testing complete as required . |
| 48 | SITC of 20 watt ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack.(M/s Havells make Model LED PRIDE ESSENTIAL) |
| 49 | SITC of 15 watt Slim recess mountedrecessed LED downlight designed for energy-efficient, high-performance, and uniform illuminationt with premium diffuser to ensure glare free & even light distribution ( M/s Philips make of Model DN172 15S LED DL G2 (CDL). or SS make) |
| 50 | SITC of Street Lights with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance With Day/Night Sensor i/c connection, testing and commissioning as required at site. ( Senso 45W of Crompton make or or SS make) Please Enable Macros to View BoQ information |
