|
| 1 | Exavation in trenches n.exc.1.5 mtr depth for foundation and getting out for laying of pipes in any type of soil complete all as specified and directedby Engr-in-charge. |
| 2 | Returning filling in including spreading levelling, watering and well ramming in layers not exc. 25cm in any type of soil |
| 3 | Removing exavated materials not exc 50 mtr and depositing where directed at a level not execeeding 1.5 mtr above the starting point. |
| 4 | Earth cushioning to UG cables using excavated soil riddled by using large sieve to separate the composite particles/roots etc and refilling in trenches all as specified and as directed. Notte: Punned thickness will be measured for payment. |
| 5 | Supply and laying un reinforced pre cost cable covers class LV type 1 flat of size 250x 150x 40 mm complete al as specified & directed. |
| 6 | M&L for replacement of XLPE insulated, screened, PVC bedded,galvanised steel strip or wire armoured,electric power cables (heavyduty) with aluminium conductor, 1100 volts, grade cross sectional area 6 sq. mm 2 core including taking down unserviceable cable all as directed . |
| 7 | All as per Item No 06 here - in - before but 10 sq mm 2 core |
| 8 | All as per Item No 06 here - in - before but 4 core 16 sq mm |
| 9 | All as per Item No 06 here - in - before but 4 core 10 Sq mm |
| 10 | All as per Item No 06 here - in - before but 4 core 25 Sq mm |
| 11 | Supply ,Installing ,testing and commissioning, factory made and tested,CPRI approved LT panel board out door type,weather,vermin proof, mounted on plateform with angle iron leg of size 50x50x 6 mm thick,suitable for 440 volts,3 phase 4 wire 50HZ AC supply system, conforming to IS-5039, made of 3 mm thick CRCA sheet with Bottom \\"C\\" Chanel 75 mm with cable chamber size of panel 1400x900x450 mm and aluminium bus bar 1.5 times of rated current of incoming MCCB with heat shrink insulation and mounting insulators, angle iron frame work of size 50x50x6 mm thick ,ventilation arrangement, powder coated paint of approved colour over a coat of red oxide primer complete all as specified and directed including the following:- MCCB 4 pole, 250 Amps, 35KA, 415 volts -01 No (Incoming) , MCCB 4 pole, 100 Amps, 25 KA, 415 volts -01 No (Outgoing) , MCCB 4 pole 32 Amps 25 KA - 05 Nos, Indicator lamp R,Y, B LED type -01 Set, MCB SP 6-32 Amps - 03 Nos for control wiring protection, Digital type Ammeter with suitable rating CTs -01 Nos (g) Volt meter digital type - 01 Nos (Near Porat cabinmandir , Offrs mess) |
| 12 | Supply ,Installing ,testing and commissioning, factory made and tested,CPRI approved LT panel board out door type,weather,vermin proof, mounted on plateform with angle iron leg of size 50x50x 6 mm thick,suitable for 440 volts,3 phase 4 wire 50HZ AC supply system, conforming to IS-5039, made of 3 mm thick CRCA sheet with Bottom \\"C\\" Chanel 75 mm with cable chamber size of panel 1400x1200x450 mm and aluminium bus bar 1.5 times of rated current of incoming MCCB with heat shrink insulation and mounting insulators, angle iron frame work of size 50x50x6 mm thick ,ventilation arrangement, powder coated paint of approved colour over a coat of red oxide primer complete all as specified and directed including the following:- MCCB 4 pole, 250 Amps, 35KA, 415 volts -01 No (Incoming) , MCCB 4 pole, 125 Amps, 25 KA, 415 volts -01 No (Outgoing) , MCCB 4 pole 63 Amps 25 KA - 01 Nos, MCCB 4 pole 25 KA 32 Amps -02 Nos, Change over switch 4 pole 250 Amps -01 Nos Indicator lamp R,Y, B LED type -01 Set, MCB SP 6-32 Amps - 03 Nos for control wiring protection, Digital type Ammeter with suitable rating CTs -01 Nos Volt meter digital type - 01 Nos |
| 13 | Supply ,Installing ,testing and commissioning, factory made and tested,CPRI approved LT panel board out door type,weather,vermin proof, mounted on plateform with angle iron leg of size 50x50x 6 mm thick,suitable for 440 volts,3 phase 4 wire 50HZ AC supply system, conforming to IS-5039, made of 3 mm thick CRCA sheet with Bottom \\"C\\" Chanel 75 mm with cable chamber size of panel 1500x1200x450 mm and aluminium bus bar 1.5 times of rated current of incoming MCCB with heat shrink insulation and mounting insulators, angle iron frame work of size 50x50x6 mm thick ,ventilation arrangement, powder coated paint of approved colour over a coat of red oxide primer complete all as specified and directed including the following:- MCCB 4 pole, 200 Amps, 35KA, 415 volts -01 No (Incoming) , MCCB 4 pole 63 Amps 25 KA - 01 Nos, MCCB 4 pole 25 KA 32 Amps -05 Nos, DOL Starter 3 HP capacity -2 Nos, Indicator lamp R,Y, B LED type -01 Set, MCB SP 6-32 Amps - 03 Nos for control wiring protection, Digital type Ammeter with suitable rating CTs -01 Nos Volt meter digital type - 01 Nos . |
| 14 | Supply and Laying Galvanised Iron pipe light grade laid in trnches for cable protection of size 40 mm dia all as directed Please Enable Macros to View BoQ information |
