|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. DSR 2.8 |
| 2 | All kinds of soil. DSR 2.8.1 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 4 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 5 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). DSR 4.1.8 |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). DSR 5.3 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : DSR 5.9 |
| 8 | Suspended floors, roofs, landings, balconies and access platform. DSR 5.9.3 |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. DSR 5.22 |
| 10 | Thermo-Mechanically Treated bars. DSR 5.22.6 |
| 11 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: DSR 6.1 |
| 12 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1 |
| 13 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : DSR 9.96 |
| 14 | 250x16 mm DSR 9.96.2 |
| 15 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : DSR 9.97 |
| 16 | 150x10 mm DSR 9.97.4 |
| 17 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : DSR 9.100 |
| 18 | 125 mm DSR 9.100.1 |
| 19 | 12 mm cement plaster of mix : DSR 13.1 |
| 20 | 1:4 (1 cement: 4 fine sand) DSR 13.1.1 |
| 21 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR 15.2 |
| 22 | 1:3:6 or richer mix DSR 15.2.1 |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : DSR 17.3 |
| 24 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17.17 |
| 26 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. DSR 17.7.3 |
| 27 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. DSR 17.7.4 |
| 28 | Providing and fixing white vitreous china water closet squatting pan (Indian type) DSR 17.13 |
| 29 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2 |
| 30 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. DSR 17.15 |
| 31 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. DSR 17.19 |
| 32 | 10 litre (full flush) capacity-white DSR 17.19.1 |
| 33 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : DSR 17.20 |
| 34 | White solid plastic seat with lid DSR 17.20.1 |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 36 | Flexible pipe DSR 17.28.2 |
| 37 | 32 mm dia DSR 17.28.2.1 |
| 38 | 40 mm dia DSR 17.28.2.2 |
| 39 | Providing and fixing PTMT urinal cock of approved quality and colour. DSR 17.76 |
| 40 | 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. DSR 17.76.1 |
| 41 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes. Weighing not less than 60 gms. DSR 17.75 |
| 42 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. DSR 18.10 |
| 43 | Internal work – Exposed on wall. DSR 18.10.1 |
| 44 | 15 mm dia. nominal bore DSR 18.10.1 |
| 45 | 20 mm dia. nominal bore DSR 18.10.2 |
| 46 | 25 mm dia. nominal bore DSR 18.10.3 |
| 47 | 32 mm dia. nominal bore DSR 18.10.4 |
| 48 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 49 | 15 mm nominal bore DSR 18.18.1 |
| 50 | 20 mm nominal bore DSR 18.18.2 |
| 51 | 25 mm nominal bore DSR 18.18.3 |
| 52 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 53 | 30 cm length DSR 18.21.1 |
| 54 | 15 mm nominal bore DSR 18.21.1.1 |
| 55 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 56 | 15 mm nominal bore DSR 18.46.1 |
| 57 | 20 mm nominal bore DSR 18.46.2 |
| 58 | 25 mm nominal bore DSR 18.46.3 |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 60 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49 |
| 61 | 15 mm nominal bore. DSR 18.49.1 |
| 62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 63 | 15mm nominal bore D SR 18.53.1 |
| 64 | Providing and fixing C.P. Brass extension nipple ( size 15mm x 50mm) of approved quality as per direction of Engineer-in-charge. DSR 18.53A |
| 65 | Providing and fixing PTMT bib cock of approved quality and colour. DSR 18.54 |
| 66 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. DSR 18.54.1 |
| 67 | Providing and fixing PTMT pillar cock of approved quality and colour . DSR 18.56 |
| 68 | 15mm nominal bore, 107mm long. Weighing not less than 110 gms. DSR 18.56.1 |
| 69 | Providing and fixing PTMT, push cock of approved quality and colour. DSR 18.57 |
| 70 | 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. DSR 18.57.1 |
| 71 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. DSR 18.62 |
| 72 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. DSR 18.62.1 |
| 73 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. DSR 18.62.2 |
| 74 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. DSR 18.63 |
| 75 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 76 | With F.P.S. bricks DSR 18.76.1 |
| 77 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality DSR 19.19 |
| 78 | M D - 10 DSR 19.19.2 |
| 79 | Square shape 450mm internal dimension DSR 19.19.2.1 |
| 80 | H D - 20 DSR 19.19.3 |
| 81 | Circular shape 560 mm internal diameter DSR 19.19.3.1 |
| 82 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : DSR 19.30 |
| 83 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : D SR 19.30.3 |
| 84 | With F.P.S. bricks DSR 19.30.3.1 |
| 85 | P/F of Gun metal peat valve with CI wheel of approved quality of approved make |
| 86 | 15 mm dia. nominal bore |
| 87 | Providing and Fixing of C.P. Waste of 32 mm complete in all respect. |
| 88 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 89 | Providing and fixing of C.P. Long Bend (1'-4\\" long) for OWC of size 32mm dia Complete in all respect. Of approved make |
| 90 | Providing and fixing of PVC Handle for low level cistern complete in all respect. |
| 91 | Providing and Fixing PVC Tank Cover of different sizes complete in all respect. |
| 92 | 500 to 1000 Ltr |
| 93 | Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : DSR 19.4 |
| 94 | 100x100 mm size P type DSR 19.4.1 |
| 95 | With F.P.S. Bricks class designation 75 DSR 19.4.1.1 |
| 96 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 97 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm |
| 98 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 99 | Providing and fixing of C.P. Brass Spindle (Heavy Duty) for bib taps and pipplar taps weight approx. 110 gms complete in all respect. |
| 100 | Providing and fixing of PVC fitting for low level cistern complete in all respect. |
| 101 | Construction of curb consisting of cement concrete 1:2:4 including cost of CP hinged grating and cost of sand, bajri etc. complete in al respect. |
| 102 | Making provision for OWC to EWC with 4\\" C.I. bend, 4\\" C.I. coller 1 nos lead joints 2 nos, 4\\" C.I. pipe upto1\\"-0\\" long including dismentalling of OWC pan and floor complete in all respect |
| 103 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: DSR 10.14 |
| 104 | Profile B DSR 10.14.1 |
| 105 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1 |
| 106 | Providing and fixing ISI marked water proof 30 mm thick flush door shutter of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core ,fungus resistant,eco friendly with 1mm thick lamination on both side with phenol formaldehyde resin conforming to IS:848,complete in all respect |
| 107 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead DSR 15.12 |
| 108 | Of area 3 sq. metres and below DSR 15.12.1 |
| 109 | 12 mm cement plaster of mix : DSR 13.4 |
| 110 | 1:6 (1 cement: 6 coarse sand) DSR 13.4.2 |
| 111 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. DSR 10.25 |
| 112 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 10.25.2 Please Enable Macros to View BoQ information |