|
| 1 | M & L for Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | Removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. |
| 5 | M&L for plain cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 6 | M&L for brick work with fly ash bricks bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | M & L for Brickwork with fly ash bricks, straight or curved on plan to any radius inhalf brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 8 | M&L for TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 9 | All as per item No 8 above, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 10 | M&L for flat fair finished form work to sides and soffits of floor/plinth or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed. |
| 11 | M&L for RCC 1:1.5:3 Nominal mix as in lintels etc ., similar work complete all as specified and directed. |
| 12 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on internal wall surfaces and finished fair and even without using extra cement complete all as specified and directed. |
| 13 | M&L for rendering 15mm thick in two coats (10+5) on brick or concrete surfaces in CM 1:4 on fair faces of brick work or concrete surfaces of wall finished even and fair (without using extra cement) mixed with liquid water proofing compound 0.3% by weight of cement used upto 8 m height including necessary scaffolding complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately complete all as specified and directed. |
| 14 | Supply only liquid water proofing compound complete all as specified and directed. |
| 15 | M&L white washing three coats including preparation of new plastered surfaces of walls complete all as specified and directed. |
| 16 | M & L for preparation of new plastered surfaces and applying two coats of superior quality anti algae weather proof acrylic paint exterior grade (APEX) over a coat of exterior grade primer on external surface complete all as specified and directed. |
| 17 | M&L for PCC type B1 (1:2:4) using 20 mm graded aggregate as in copings, cills, surface channels etc like slightly rounded or chamfered and throating complete all as specified and directed. |
| 18 | M & L for Hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 19 | M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 20 | M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in flooring/ hard standing complete all as specified and directed. |
| 21 | Material and labour for joint free Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed. |
| 22 | Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed. |
| 23 | M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) in plinth protection including finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 24 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary screws shall be paid separately) |
| 25 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & their Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in imension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks including chowkats of doors complete all as specified and directed. |
| 27 | Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC frames complete all as specified and directed. |
| 28 | Supply and fixing Aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 29 | Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified and directed. |
| 30 | S&F for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed. |
| 31 | M&L Powder coated Aluminium anodised frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 32 | M&L Powder coated Anodised aluminium window/ventilator shutters, side hung type or sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed.. |
| 33 | M&L 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 34 | M&L aluminium anodized grill DG 916 of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) complete all as specified and directed. Make Grill No 20 of DECOREL or equivalent as approved. |
| 35 | M&L 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Cutting chases in brick work, pinning in making good to facing where required and pointing to cement mortar 1:3 to ends for concealed water tubing and making good for cutting n.exc 10 cm girth complete all as specified and directed. |
| 36 | M&L 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 37 | M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints 75 mm dia pipe,fixed in floors complete all as specified and directed. |
| 38 | All as per above item No 37 above, but 110mm dia of pipe complete all as specified and directed. |
| 39 | S&F fix PVC (SWR) bend 75 mm with access door complete all as specified and directed. |
| 40 | S&F fix PVC (SWR) bend 110 mm with access door complete all as specified and directed. |
| 41 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed. |
| 42 | S & F Stainless steel grating 100mm dia with/without hole complete all as specified and directed. |
| 43 | Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I. |
| 44 | Supply and fixing ball brass valve, high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and directed. |
| 45 | S&F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 46 | Supply & fix Vitreous china squatting pan 'Orissa' pattern of size 580mm ˣ 440mm white with integral foot rest excluding flushing cistern & flush pipe including provision of lime concrete bedding complete all as specified and directed. |
| 47 | S&F Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminised hinge device complete all as specified and directed. |
| 48 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc., complete all as specified and directed. |
| 49 | S&F vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 50 | S&F bib tap Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of about 15mm bore diameter complete all as specified and directed. (Make : Jaquar CON-037KN) |
| 51 | S&F Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges with complete fitting : Make Jaquar (ALD -579) or equivalent as approved. |
| 52 | S & F Angular cock with Flange, fancy type chromium plated with long shank and cup (concealed type) for 15 mm dia bore pipe (Make: Jaquar, Code No - CON-059KN ) complete all as specified and directed. |
| 53 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 54 | S&F pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe & fixed in repair of about 15mm diameter complete all as specified and directed. (Make: Jaquar, Code No - CON-021KN) |
| 55 | Supply only waste fittings brass chromium plated 32 mm for sinks/basin etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 56 | S&F for 600 mm x 450 mm bevelled edge mirror or selected quality glass mounted on 6 mm thick AC building board on commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washer and fixed in repair complete all as specified and directed. |
| 57 | S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass chromium plated in repair complete all as specified and directed. |
| 58 | S&F flexible PVC waste pipe of size 32mm dia used for wash basin & sinks complete all as specified and directed. |
| 59 | S&F 15 mm bore chromium plated fancy type two way bib tap with flange, screwed down high pressure complete all as specified and directed. |
| 60 | Material and labour for pre-cast reinforced cement concrete manhole cover 1:2:4, type B1, (Using 20mm graded stone aggregate) set in CM 1:4 complete including necessary formwork complete all as specified and directed. |
| 61 | M&L 150mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 62 | Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia PVC pipe complete all as specified and directed. |
| 63 | M & L for onsite conventional type LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users complete all as specified and directed. |
| 64 | M & L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed brick masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8M dia 3 M effective depth complete all as specified and directed.. |
| 65 | M & L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base complete all as specified and directed. |
| 66 | M & L for Pre-polished Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 67 | M&L for 6mm thick PVC hollow false ceiling board including 1200x600mm size aluminium concealed frame work with 4mm dia G.I wire hangers to fix the framework with RCC slab/Truss complete all as specified and directed. |
| 68 | M&L for MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and directed. |
| 69 | M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 70 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 71 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 72 | M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 73 | M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLSH grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in surface PVC Casing-Caping not less than 20mm width with pressed steel in concealed MS box duly including covered with 3 mm thick hylem sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes complete all as specified and directed. (a) For one light/Ceiling/Exhaust Fan point controlled by one switch |
| 74 | M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLSH grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in surface PVC Casing-Caping not less than 20mm width with pressed steel in concealed MS box duly including covered with 3 mm thick hylem sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes complete all as specified and directed.(b ) For one socket point 5 Amps on same board |
| 75 | Supply and fixing of switch paino, flush type, single pole, one way, 6 Amp, complete all as specified and directed. |
| 76 | S&F ceiling rose surface backlite 3 terminals 65X50mm 230V including PVC Box of size 3\\"X3\\" round type complete all as specified and directed. |
| 77 | S&F for socket out let 3 pin 6 Amps flush type, 230V complete all as specified and directed. |
| 78 | S&F for light fitting 1 x 9 Watt, 220 V connecting up with three core flexible copper conductor cable of suitable size from ceiling rose c complete all as specified and directed. Note:-Rate is inclusive of flexible copper cable. |
| 79 | Supply and fix LED building security light 35W, 230 V AC outdoor type with high pressure die aluminium housing and heat resistance complete with driver, lamp bracket with impact resistance IK08 and corrosion resistance including thermal management in multiple optics complete with IP 66 protection, lumen output 4200 complete having 40/32 mm dia GI pipe bracket having 1.5 m length complete all as specified and directed. |
| 80 | Supply and fix of exhaust Fan steel body, 300 mm sweep 1400 rpm, heavy duty, AC single phase, 230 volts including louvers, blades and frame connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed. |
| 81 | Supply and fix SPN DBs, Double metal door, 4 way,IP-54, IK 09, 240 V with 200 A bus bars complete all as specified and directed. |
| 82 | Supply & fix MCB SP 6 to 32 Amps 240 Volts, C curve, 10 complete all as specified and directed. |
| 83 | Supply & fix MCB SPN, 40 to 63 Amps, C Series, 240 Volts, 10 complete all as specified and directed. |
| 84 | M&L for submain wiring with two single core PVC insulated unsheathed stranded copper conductor of 4 sqmm (nominal area) FRLSH drawing through PVC cashing caping and one 4 sqmm stranded copper conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade FRLSH for earth continuity conductor and connecting with main earth dolly complete all as specified and directed. NOTE: 3 runs of 4 Sqmm and 1 run of casing caping will be measured as one unit i.e RM |
| 85 | M&L of 4 sqmm 3 core PVC insulated flexible copper conductor wire drawn through PVC conduit or as indicated complete all as specified and directed. |
| 86 | M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth wire 4 mm dia by means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering complete all as specified and directed and all as shown in electrical plate No.5 of SSR part 1. |
| 87 | M & L for Cutting/drilling of GI pipe of Size 50/25 mm bore and inserting 20 mm dia pipe complete all as specified and directed. |
| 88 | Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable/pole in hard/dense soil complete all as specified and directed. |
| 89 | Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and directed. |
| 90 | Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 91 | Supply and laying in trenches, in any length, Galvanised water tubing, medium grade, nominal dia 20 mm, with all fittings, testing complete all as specified and directed. |
| 92 | S&F gun-metal gate/globe valves,20 mm bore of pipe, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 93 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
