|
| 1 | Table 900x600 mm with/without drawer/Table one piece (Drg No : 233 & FD-224) |
| 2 | Dismantling of unserviceable leg of table 900mm x 600mm with/without drawer and providing and fixing new teak leg of 1st class hard wood (Teak) and polishing to match all as per drawing and as specified by the Engr-in-charge. (Drg No : 233, FD-224, 283 & 284) |
| 3 | All as per item No 1.01 here-in-before but top side long rail (Drg No : 233, FD-224, 283 & 284) |
| 4 | All as per item No 1.01 here-in-before but top side short rail (Drg No : 233, FD-224, 283 & 284) |
| 5 | All as per item No 1.01 here-in-before but Manufacturing and fixing of Drawer complete of table 900x600mm all as specified and shown in drawings. (Drg No : 233, FD-224, 283 & 284). Note: The size of the drawer shall be reduced to allow fixng of telescopic channels to both the sides of the drawer. Good quality soft closing telescopic channels and recessed handle/Profile handle of size 100mm in powder coated metallic finish all as approved by GE shall be fixed on the drawer. |
| 6 | All as per item No 1.01 here-in-before but stiffner completes all as specified and shown in drawings. (Drg No : 233, FD-224, 283 & 284) |
| 7 | Chair Verandah :- (Drg No : FD-359) |
| 8 | Removing the old newar/cane from chair veranda and re-weaving with new 4mm wide white colour cane complete all as specified and as directed by the Engineer-in-Charge. (Drg No : FD-359) Make : Shah/Maharastra/Premier/Arihant/BR |
| 9 | M & L for painting with the help of Spray machine to the frame of chair verandah with white synthetic Satin paint 1st quality after preparation of surface and applying Red oxide Primer (after removing the newar) complete all as specified and directed by Engineer-in-Charge. Make : ASAIN apcolite/ NEROLAC/BERGER. (Drg No : FD-359) |
| 10 | M & L for Gas welding to frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (Drg No : FD-359) |
| 11 | Supply and fixing with gas welding in replacement of unserviceable conduit of frame of Chair Veranda with 18 -20 mm conduit pipe of wall thickness 1.6mm duly gas welding complete all as directed by Engr-in-Charge. (Drg No : FD-359) |
| 12 | Chair dining :- FD-279 |
| 13 | Supply and fixing in replacement of rear leg with new leg to chair dining of 1st class hard teak wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD-279) |
| 14 | All as per Srl item No 3.01 here-in-before but front leg of chair dining. (Drg No : FD-279) |
| 15 | All as per Srl item No 3.01 here-in-before but front rail, side rail, back rail of chair dining. (Drg No : FD-279) |
| 16 | All as per Srl item No 3.01 here-in-before but bottom stiffener of chair dining (Drg No : FD-279) |
| 17 | All as per Srl item No 3.01 here-in-before but back rest of chair dining (Drg No : FD-279) |
| 18 | Material and labour for refixing and retightening of loose joints of chair dining with the help of wooden dowel and wood adhesive complete all as specified by Engineer-in-charge |
| 19 | Chair writing :- (Drg No : FD-202, FD-250 & FD-280) |
| 20 | Supply and fixing in replacement of rear leg with new legs of 2nd class hard wood to chair writing made to shape and complete including polishing to match all as specified and shown in drg complete all as specified and directed by the Engineer-in-Charge. (Drg No : FD-202, FD-250 & FD-280) |
| 21 | All as per Srl item No 4.01 here-in-before but front legs. (Drg No : FD-202, FD-250 & FD-280) |
| 22 | All as per Srl item No 4.01 here-in-before but arms. (Drg No : FD-202, FD-250 & FD-280) |
| 23 | All as per Srl item No 4.01 here-in-before but side, front & back rail. (Drg No : FD-202, FD-250 & FD-280) |
| 24 | All as per Srl item No 4.01 here-in-before but stiffner (Side & central one). (Drg No : FD-202, FD-250 & FD-280) |
| 25 | All as per Srl item No 4.01 here-in-before but back rest. (Drg No : FD-202, FD-250 & FD-280) |
| 26 | Material and labour for refixing and retightening of loose joints of chair dining with the help of wooden dowel in best workmanship all as specified by Engineer-in-charge |
| 27 | Chair Easy :- (Drg No : FD-201 & FD-229) |
| 28 | Supply and fixing in replacement of rear leg with new leg to chair easy of 2nd class hard wood made to shape and size complete including polishing to match shown in drg complete all as specified and as directed by the Engineer-in-Charge. (Drg No : FD-201 & FD-229) |
| 29 | All as per Srl item No 5.01 here-in-before but front leg. (Drg No : FD-201 & FD-229) |
| 30 | All as per Srl item No 5.01 here-in-before but front batten. (Drg No : FD-201 & FD-229) |
| 31 | All as per Srl item No 5.01 here-in-before but back batten. (Drg No : FD-201 & FD-229) |
| 32 | All as per Srl item No 5.01 here-in-before but arms rest . (Drg No : FD-201 & FD-229) |
| 33 | All as per Srl item No 5.01 here-in-before but front & back rail of seat/back. (Drg No : FD-201 & FD-229) |
| 34 | All as per Srl item No 5.01 here-in-before but side rail of seat/back. (Drg No : FD-201 & FD-229) |
| 35 | Chair Revolving Computer (TP) |
| 36 | Supply and fixing in replacement of unserviceable seat and back of chair revolving with new seat and back made of 50mm thick foam of good quality 32 density with new tapestry cloth. The cloth type shall be Cotton linen/ jute/ cotton velvet not less than Rs. 200/meter of shade as approved by GE. The seat shall be fixed over 6 mm thick ply made to shape complete all as per sample and directed by Engineer-in-Charge. |
| 37 | All as per Srl item No 6.01 here-in-before but base chromium plated/ PVC depending upon the model of the TP chair with wheels of Chair revolving. |
| 38 | All as per Srl item No. 6.01 here-in-before but PVC arms of chair revolving. |
| 39 | All as per Srl item No. 6.01 here-in-before but tapestry cloth of seat and back of chair revolving. The cloth type shall be Cotton linen/ jute/ cotton velvet not less than Rs. 200/meter of shade as approved by GE and as complete all as specified and directed by Engineer-in-charge. |
| 40 | All as per Srl item No.6.01 here-in-before but hydraulic system/ shock up frame of Chair revolving Executive. |
| 41 | Side Board. (Drg No : FD-241) |
| 42 | Removing old unserviceable top of side board and supply and fixing new top made out of 19mm thick commercial ply wood over which 1m thick plastic laminated sheet as approved by GE will be fixed on one side irrespective what is shown in drgs (Drg No : FD-241). The top shall have a projection of approx 20mm toward the front of the side board. PVC edge band of shade to match with top shall be glued to the top with the help of Probond Edgelock from Pidilite or similar strong adhesive complete all as specified and directed. |
| 43 | Removing old u/s back of side board and supply and fixing new back made out of 6mm thick commercial plywood irrespective what is shown in drgs. (Drg No : FD-241) |
| 44 | Removing old unserviseable drawer of side board and supply and fixing new drawer. The front of drawer shall have 19mm thick commercial ply over which 1 mm thick plastic laminated/sunmica sheet will be fixed both sides. The front of the drawer shall overlap the side of the side board in closed position to align with the level of front shutters. The sides of the drawer shall be made of 19mm thick both side prelaminated particle board. The bottom and back of drawer shall be made of 12mm thick both side prelaminated particle board. Irrespective what is shown in drgs the size of each drawer shall be reduced to allow fixing of telescopic channels of appropriate size. Good quality soft closing telescopic channels as approve by GE shall be fixed. All open edges of plywood shall be covered with PVC Edge band to be fixed with strong adhesive (edgelock) upto the satisfaction of Engineer-in-charge.(Drg No : FD-241) |
| 45 | Removing old u/s shutter of side board and supply and fixing new shutter made out of 19mm thick commercial plywood over which 1mm thick plastic lamination sheet/ sunmica shall be fixed on both sides including PVC edging alround. The shutter shall be fixed to the sides with the help of hydraulic soft close hinges of Make as approved by GE irrespective what is shown in drgs. The shutter shall be overlapping the sides when in closed position. (Drg No : FD-241) |
| 46 | Removing old unserviceable sides of the side board and supply and fixing new side made of 19 mm thick commercial plywood over which a 1mm thick lamination / sunmica shall be fixed on one side complete all as specified and directed. |
| 47 | Removing old knobs/ handles from the drawer and shutters and fixing with new handles 100 mm long of superior quality in Rose gold finish or shade as approved by GE and all as directed by Engineer-in-charge. |
| 48 | Removing old unserviceable legs of the side board and supply and fixing new Y- shaped metallic furniture legs 4 inches, Chrome plated of superior quality as approved by GE in matching finish with the handles. |
| 49 | Chair Visitor/Chair writing cushioned (MAP) (TP) :- |
| 50 | Supply and fixing in replacement of unserviceable seat and back of chair visitor with new seat and back made of 50mm thick foam 32 density with new tapestry cloth. The cloth type shall be Cotton linen/ jute/ cotton velvet not less than Rs. 200/meter of shade as approved by GE. The seat shall be fixed over 6 mm thick ply made to shape complete all as per sample and directed by Engineer-in-Charge. |
| 51 | Supply and stitching in replacement of old/worn out tapestry of chair visitor with new tapestry cloth. The cloth type shall be Cotton linen/ jute/ cotton velvet not less than Rs. 200/meter of shade as approved by GE and as directed by Engineer-in-charge. (TP) |
| 52 | Supply & fixing in replacement of unserviceable PVC arms of chair visitor with new PVC arms all as specified and directed by the Engineer –in- charge. (TP) |
| 53 | M & L for Gas welding to frame of chair visitor including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. (TP) |
| 54 | M & L for painting to frame of chair visitor with black synthetic enamel paint including preparation of surface as specified and directed by Engineer-in-Charge. (TP) |
| 55 | Chair Revolving Executive (TP) :- |
| 56 | Supply and fixing in replacement of unserviceable seat and back of chair revolving executive with new set of seat and back made of 75mm thick foam of good quality 32 density covered with new leatherette/Rexine/Fabric tapestry cloth. The type of cloth shall be Suede plain velvet/ cotton line/ suede jute fabric not less than Rs 400/- per metre in shade as per sample approved by GE including 12mm thick curved plywood, made with 7 number ply for base complete all as per directed by Engineer-in-Charge. New PVC arms shall be screwed firmly to the set of seat and back as per best trade practice. |
| 57 | All as per Srl item No.9.01 here-in-before but hydraulic system/ shock up frame of Chair revolving Executive. |
| 58 | All as per Srl item No.9.01 here-in-before but Base iron plate of Chair revolving Executive. |
| 59 | All as per Srl item No. 9.01 here- in before but CP Base heavy duty with caster wheels of Chair revolving Executive. |
| 60 | Chair dining MAP drg :- FD/E6/MAP/10 |
| 61 | Supply and fixing in replacement of rear leg with new leg to chair dining MAP of 1st class hard teak wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. (Drg No : FD/E6/MAP/10) |
| 62 | All as per Srl item No 10.01 here in before but front leg of chair dining MAP (Drg No : FD/E6/MAP/10) |
| 63 | All as per Srl item No 10.01 here in before but back stiffener of chair dining MAP (Drg No : FD/E6/MAP/10) |
| 64 | All as per Srl item No 10.01 here in before but bottom stiffener of chair dining MAP (Drg No : FD/E6/MAP/10) |
| 65 | Supply of new cool foam/ HR foam/ Latex plus foam cushion 40 density (Make: sleepwell / KOMFORT Universe for seat of chair dining of size 44 cm x 39 cm, five inches thick duly stitched with new tapestry cloth. The type of cloth shall be Suede plain velvet/ cotton linen/suede jute fabric of Make D Decor/ Mahindra/ AV decor/ SSTF/SB India/ GM Syntex not less than Rs 350/- per metre in shade as per sample approved by GE and as specified and directed by Engr-in-charge. Make of foam : Feather foam / Sleepwell / Kurlon. (Drg No : FD/E6/MAP/10) |
| 66 | Sofa set five seater (TP) |
| 67 | Material and labour for removing existing worn out tapestry cloth and damaged cushioned seat and back from the sofa set and fixing new cushion sheet of thickness 100 mm and 32 density and of best local Make as approved by GE including re-upholstering of sofa set seat and back five seater (Trade Pattern) with new tapestry cloth sewn in tufted pattern in the back as directed by Engineer-in-charge. The cloth shall be of best quality not less than Rs 300/- per metre of Make D' Decor/ Mahindra/ AV decor/ SSTF/SB India/ GM Syntex in shade as per sample approved by GE and complete all as specified and directed by Engr-in-charge. |
| 68 | Sofa set five seater (Drg No. FD-281) |
| 69 | Supply and fixing of new Foam cushion to the sofa set five seater, soft foam cushion of size 21'' x 22'', 40 density, 100mm thick. The foam cushion shall be Latex plus / HR foam/ cool foam of Make Sleepwell / KOMFORT Universe/ Wakefit/ Neelkamal as approved by GE. The cushion will be stitched in piping pattern with the suede tapestry cloth of best quality not less than Rs 350/- per metre of Make D' Decor/ Mahindra/ AV decor/ SSTF/ SB India/ GM Syntex in shade as per sample approved by GE. |
| 70 | Bed Hard Steel (Drg No. FD/E6/MAP/08) |
| 71 | Material and labour for removing denting wherever required making the surface smooth after removing old paint, scrubbing with emery paper (i.e. complete removal of existing treatment) filling putty at required places and spray painting in Black shade with two coats of 1st quality Satin enamel paint to bed hard steel over a coat of red oxide primer complete all as specified and directed. (Drg No. FD/E6/MAP/08) |
| 72 | Removing of unserviceable ply of bed hard steel and fixing of 12 mm thick plywood, made with 7 number ply Grade BWR (Exterior Grade) ISI Marked of Make Green ply/ Kitply/ Century/ National , with GI screws as specified on drg. (Drg No. FD/E6/MAP/08) |
| 73 | Removing of unserviceable particle board from the head board or foot board of Bed hard steel and supply and fixing new prelaminated particle board 18mm of approved shade and Make as approved by GE. PVC edge banding shall be provided to the particle board affixed with strong adhesive. |
| 74 | Charpoy folding IP(Drg No. FD-388) |
| 75 | Material and labour for removing denting wherever required making the surface smooth after removing old paint, scrubbing with emery paper (i.e. complete removal of existing treatment) filling putty at required places and spray painting in OG shade with two coats of 1st quality synthetic enamel paint to charpoy folding IP over a coat of red oxide primer complete all as specified and directed. (Drg No. FD-388) |
| 76 | Removing of unserviceable ply of charpoy IP folding and fixing of 12 mm thick plywood, made with 5 number ply Grade BWR (Exterior Grade) ISI Marked, with GI screws. The GI screw shall be embedded in plywood top such that the head of the screw should not lie above the level of plywood top. as specified on drg. Make: Centuri/ Duro/ National. (Drg No. FD-388) |
| 77 | Material and labour for welding to broken joints of Charpoy IP and Bed hard steel all as specified by Engr-in-Charge. (Drg No. FD-388) |
| 78 | Table centre (Drg No. FD-235 & 274) |
| 79 | Dismantling of unserviceable leg of table centre and providing new 1st class hard wood teak legs including polishing to match all as per drawings and complete all as specified and directed. (Drg No. FD-235 & 274) |
| 80 | All as per Srl item No 15.01 here-in-before but top side long rail. (Drg No. FD-235 & 274) |
| 81 | All as per Srl item No 15.01 here-in-before but top side short rail. (Drg No. FD-235 & 274) |
| 82 | All as per Srl item No 15.01 here-in-before but stiffner. (Drg No. FD-235 & 274) |
| 83 | Table dining 6/8 persons (Drg No. FD-273) |
| 84 | Dismantling of unserviceable leg of table dinning 6/8 pers and providing of new 1st class hard wood teak legs including polishing to match all as per drawings and complete all as specified and directed. (Drg No. FD-273) |
| 85 | All as per Srl item No 16.01 here-in-before but top side long rail. (Drg No. FD-273) |
| 86 | All as per Srl item No 16.01 here-in-before but top side short rail.(Drg No. FD-273) |
| 87 | Teapoy (wooden) (Drg No. FD-232/278 |
| 88 | Dismantling of unserviceable leg of teapoy wooden and providing of new 1st class hard wood teak legs including polishing to match all as per drawings and complete all as specified and directed. (Drg No. FD-232/278) |
| 89 | All as per Srl item No 17.01 here-in-before but top side long rail. (Drg No. FD-232/278) |
| 90 | All as per Srl item No 17.01 here-in-before but top side short rail. (Drg No. FD-232/278) |
| 91 | All as per Srl item No 17.01 here-in-beforee but stiffner.(Drg No. FD-232/278 |
| 92 | Table peg (Drg No.FD-236/277) |
| 93 | Dismantling of unserviceable leg of table peg and providing of new 1st class hard wood teak legs including polishing to match all as per drawings and complete all as specified and directed.(Drg No.FD-236/277) |
| 94 | All as per Srl item No 18.01 here-in-before but top side long rail. (Drg No.FD-236/277) |
| 95 | All as per Srl item No 17.01 here-in-before but top side short rail.(Drg No.FD-236/277) |
| 96 | All as per Srl item No 17.01 here-in-before but stiffener. (Drg No.FD-236/277) |
| 97 | Table writing (Drg No.FD-275) |
| 98 | Dismantling of unserviceable leg of table writing and providing new 1st class hard wood teak wood leg including polishing to match complete all as specified and directed by Engineer-in-Charge. (Drg No.FD-275) |
| 99 | All as per Srl item No 19.01 here-in-before but top side long rail. (Drg No.FD-275). Irrespective of drg the front top rail shall be long joining the front legs. |
| 100 | All as per Srl item No 19.01 here-in-before but top side short rail (Drg No.FD-275) |
| 101 | All as per Srl item No 19.01 here-in-before but stiffner of table writing. The middle long stiffener shall join the short side stiffeners irrrespective of the drg. (Drg No.FD-275) |
| 102 | Material and labour for replacement of wooden drawer of table writing with new drawer. Sides and back of the drawer shall be made of 12mm thick plywood, made with 7 number ply. Front of the drawer shall be of 19mm thick commercial plywood over which 1 mm thick plastic lamination/ sunmica shall be fixed. The shade shall be as approved by GE. Bottom of the drawer to be made of 6mm thick ply. (Drg No.FD-275). The drawer shall run on soft closing telescopic channels. The channels shall be povided from BSO Yard. |
| 103 | Material and labour for removing old unserviceable shutter of the cupboard of table writing and fixing new shutter made out of 19mm thick 19mm thick commercial plywood over which 1 mm thick plastic lamination/ sunmica shall be fixed along with PVC edge banding alaround the edges. The shade of lamination sheet shall be as approved by GE. The shutter shall be fixed with the help of soft closing hydraulic hinges of apprpriate sizeas specified and directed by the Engr-in-charge. (Drg No.FD-275) |
| 104 | Material and labour for removing back ply and sides of the box which house the drawer and cupboard of table writing and replacing them with new back made of 6mm th ply and sides made of 19 mm thick commercial plywood over which 1 mm thick lamination/ sunmica of approved shade shall be fixed. (Drg No.FD-275) |
| 105 | Bed ply top (Drg No. FD-246/FD-1102 &FD/MAP/01) |
| 106 | Material and labour for removing of damaged Teak face ply and beading from existing head board and replacing with 6mm commercial plywood on both sides of the foot board. The ply on outer side exposed to view shall be covered with lamination/ sunmica sheet of shade as approved by GE. (Drg No. FD-246) |
| 107 | Material and labour for removing of damaged Teak face ply and beading from existing foot board and replacing with 6mm commercial plywood on both sides of the foot board. The ply on outer side exposed to view shall be covered with lamination/ sunmica sheet of shade as approved by GE. (Drg No. FD-246) |
| 108 | Material and labor for opening of different components of Bed hard and rejoining after tightening the joints/ carryiing out required repairs as above in best manner of workmanship. (Drg No FD-246) |
| 109 | Material and labour for removing existing unserviceable ply of bed ply top and supply and fixing new ply of 12mm thick plywood, made with 7 number ply commercial both side (BWR). Make of ply : CENTURI/ DURO/ NATIONAL (Drg No. FD-246) |
| 110 | Table dressing ladies (FD-251 & MAP drg) |
| 111 | Material and labour for repair/rejointing of mirror frame and fixing new ply at the back alongwith key plates to the mirror of the dressing table ladies. (FD-251 & MAP drg) |
| 112 | Material and labour for replacement of legs of table dressing ladies with new 100mm Y- shaped metallic legs chrome plated in required Golden/ metallic finish as approved by GE and complete with GI screws all as directed by the Engr-in-charge. (FD-251 & MAP drg) |
| 113 | Removing old unserviceable drawers of table dressing ladies and S&F new drawers. Side and back of drawer shall be of 12 mm thick prelaminated particle board both side. Bottom of drawer shall be of 6 mm thick commercial plywood. Front of drawer shall be of 19 mm thick prelaminated particle board both side of Make Action Tessa/ Greenply. 3 mm thick teak wood edging shall be provided to all sides, front and edges of drawers. Irrespective of the drg the size of the drawer shall be reduced so as to allow housing of soft closing telescopic channels on both sides. (FD-251 & MAP drg) |
| 114 | Removing old unserviceable back of table dressing ladies and S&F new back made out of 12m thick commercial ply of Make approved by GE. Rest all as per drg. (FD-251 & MAP drg) |
| 115 | Removing old unserviceable top of table dressing ladies and S&F new top made out of 19 mm thick Pre laminated particle board of Make Action Tessa/ Greenply of approved shade. PVC edge banding of same shade shall be applied to the edges of the top. Rest all as per drg. (FD-251 & MAP drg) |
| 116 | Table dressing gents (FD-230 ) |
| 117 | Material and labour for repair and rejointing to the frame of mirror of table dressing gents and supply and fixing new ply to the back of the frame along with key plates wherever required. (FD-230 ) |
| 118 | Reapir of Drawer Box:- Removing old u/s drawer of table dressing gents and S&F new drawer made of Prelaminated particle Board of Make approved by GE. Front and sides of the drawer shall be of 18 mm thick pre laminated particle board both side. The bottom and back of drawer shall be of 6 mm thick plywood commercial. The drawer shall run on telescopic soft close channels of approved Make. (FD-230 ) |
| 119 | Material and labour for fixing of mirror frame of dressing table gents onto the wall with the help of keyplates (wherever required) and MS screws of required sizes. (FD-230 ) |
| 120 | Table Computer (TP/ FD/E6/MAP/03) & Table computer with wheels |
| 121 | Supply and fixing in replacement of unserviceable top of table computer with new top made out of 19mm thick Pre laminated particle board of Make Action tesa/Greenply with 1mm PVC edge banding of matching shade all round as specified and directed by Engineer -in- charge. (TP) |
| 122 | Supply and fixing in replacement of unserviceable side of table computer with new sides made out of 18mm thick prelaminated particle board matched to existing shade all as specified and directed by engineer-in-charge. (TP) |
| 123 | Supply and fixing in replacement of unserviceable Key Boad tray made out of 18mm thick prelaminated particle board of existing shade including PVC edge banding of matching shade all as specified and directed by Engineer-in-charge. (TP) |
| 124 | Supply and fixing in replacement of unserviceable Mouse tray and drawer of table computer with new tray and drawer including PVC edge banding of matching shade and drawer to be made out of 18 mm thick prelaminated particle board and 6mm ply for base all as specified and directed by Engr-in-Charge (TP) |
| 125 | Supply and fixing in replace ment of unserviceable Telescopic channels of drawers and trays with new telescopic channels of appropriate size complete all as specified and directed by Engineer-in-charge (TP) |
| 126 | Spply and fixing in replacement of old broken knob of drawr of table compute with new knobs Trade pattern as approved by GE and all as directed and specified by Engineer-in- charge. (TP) |
| 127 | Material and labour for removing of existing unserviceable top of the following tables and supply and fixing of new top of any size of 18mm thick commercial ply over which 1mm thic PVC lamination/ sunmica sheet shall be fixed including PVC edge banding all around. Make of PLywood and sunmica : Action Tessa/ Century/ Green lam/Kitply. ISI marked :- |
| 128 | Table Peg (FD- 236/277) |
| 129 | Table centre (FD-274) |
| 130 | Teapoy wooden (FD-278) |
| 131 | Teapy verandah (MAP drg) |
| 132 | Teapoy verandah (FD- 35/208/255/383) |
| 133 | Table 900mm x 600mm with / without drawer (FD-283) |
| 134 | Table writing medium (FD-33/249/275) |
| 135 | Table dining (900 x 900)mm (FD-3009) |
| 136 | Table dining 4 persons (MAP drg) |
| 137 | Table dining six persons (FD- 30/239/273) |
| 138 | Polishing of wooden furniture:- Material and labour for cleaning and dusting of following furntiure articles by removing of unwanted settled dirt from every exposed wooden surface with rough sand paper, filling the cracks and gaps with putty, staining of wood surface with Raw sienna/burnt sienna and re-rubbing with fine sand paper to make the surface smooth and polishing with French Spirit Polish to be applied with soft Malmal cloth/ soft brush so as to give a glossy finish as directed and specified by Engineer-in-charge :- (NOTE : The polishing shall be carried out at Furniture Yard and at the site of furniture as required and as directed by Engineer in charge) |
| 139 | Chair dining (FD-279) |
| 140 | Chair writing (FD- 20/202/250/280) |
| 141 | Chair Easy (FD- 201/229) |
| 142 | Chair dining cushioned (MAP drg) |
| 143 | Table dressing ladies (FD- 251) |
| 144 | Table dressing gents:- |
| 145 | Table Peg (FD- 236/277) |
| 146 | Table centre (FD-274) |
| 147 | Teapoy wooden (FD-278) |
| 148 | Table 900mm x 600mm with / without drawer /all purpose(FD-283/284/223/224) |
| 149 | Table writing medium (FD-33/249/275) |
| 150 | Table dining 4 persons (MAP drg) |
| 151 | Table dining six persons (FD- 30/239/273) |
| 152 | Sofa set five seater (FD-243/281/MAP) |
| 153 | Bed hard wooden |
| 154 | Material and labour for painting of following furniture articles by removing denting wherever required, making the surface smooth after removing old paint, scrubbing with emery paper, removing existing treatment completely, filling putty at required places and spray painting with enamel paint/ satin paint of shade Black/Grey/white (as required and as approved) with two coats of enamel over one coat of red oxide prime (Make of enamel:- Asian/Nerolac/Berger) :- (NOTE: The painting shall be carried out at Furniture Yard and at the site of furniture as required and as directed by Engineer in charge) |
| 155 | Almirah medium steel (FD- 1032) |
| 156 | Almirah large steel (FD-1031) |
| 157 | Almirah Large steel half hanging and half shelving |
| 158 | Teapoy verandah (FD- 35/208/255/383) |
| 159 | Teapoy verandah (MAP drg) |
| 160 | Table 900 x900 mm steel |
| 161 | Rack shoe steel |
| 162 | Material and labour for recanning of chairs or other articles of furniture with best quality plastic cane 2mm wide (white/cream shade) in Godrej pattern including removal of old cane complete all as specified and directed by Engineer-in-charge. Make of cane: PREMIER/ B.R/ ARIHANT/ SHAH/ MAHARASHTRA/ USHA |
| 163 | Note : Amount of credit of Rs. 55399.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
