|
| 1 | Demolition of Brick work or stone/boulder masonry, laid built in cement mortor complete all as specified and directed |
| 2 | Material and labour for precast cement concrete solid block type B1 1:2:4 (using 20mm graded stone aggregate) exc 10cm in width and setting in cement morter 1:6 complete all as specified and directed |
| 3 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed |
| 4 | Material and labour Rendering 15mm thick on fair faces wall of brick work in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and directed |
| 5 | Material and labour for 10mm thick cement mortar plaster on brick wall in concrete surface in cement morter 1:6 finished even and smooth wihout using extra cement, complete all as specified and directed |
| 6 | Material and labour for preparation of new plastered surfaces of walls and applying two coat of antifungal weather proof paint of required shade over a coat of primer using modern tools, and spray technique complete all as specified and directed |
| 7 | Material and labour for complete removal of existing treatment by mechanical jet water cleaning /scrubbing machine with steel brush and applying two coat of antifungal weather proof paint of required shade over a coat of primer using modern tools, and spray technique complete all as specified and directed |
| 8 | Material and labour preparation new surfaces of walls and applying Two coat of distemper oil emulsion over a coat of primer using mordern tools, and spray technique complete all as specified and directed |
| 9 | Material and labour for complete removal of existing treatment by mechanical jet spray /grinder and applying two coats of Two coat of distemper oil emulsion over a coat of primer through authorised company applicator using mordern tools, and spray technique complete all as specified and directed. |
| 10 | Material and labour preparation of new steel surfaces and applying two coats of synthetic enamal paint over a coat of red oxide complete all as specified and directed. |
| 11 | Material and labour for preparation and applying of one coat of synthetic enamel painting on old steel surface of any description, not otherwise descri-bed, over 10cm width or girth all as specified and directed |
| 12 | Taking down chowkat with shutters (without taking off shutters from the frame) n.exc 1.5 sqm complete all as specified and directed. |
| 13 | Taking down chowkat with shutters (without taking off shutters from the frame) exc 1.5 sqm but n. exc 4.0 sqm complete all as specified and directed. |
| 14 | Providing and fixing factory made UPVC white colour casement (Openable) window/ventilator (including UPVC frame) made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 4mm thick glazing with selected quality glass and including anodised aluminium grill with minimum anodic coating of grade AC 15 of approved design/pattern and necessary aluminium frame for fixing of aluminium grill.(Note: The unit rate quoted by contractor including cost of 4mm thick glass sheet, aluminium grill and all other connected accessories. Net opening will be measured for payment purpose.) complete all as specififed and directed . |
| 15 | Supply and fixing fiber glass reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions |
| 16 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 18 | Material and labour coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 19 | Supply and fix glazed ceramic coloured tiles 300x250x7mm thick or 450/350/7mm thick .in dado incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and directed. |
| 20 | Material and labour for machine cut kota stone slab flooring 20-25mm thick, screed bed or bedding layer of 20mm thick cement morter 1:6 laid and jointed with gray cement slurry mixed wirh pigment to match the shade of the slab including rubbing and polishing etc.complete all as specified and directed |
| 21 | Material and labour for form work of flat and rough finished to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed. |
| 22 | Supply and fix Mild steel TMT bars round bars, 10mm dia and over cut to length, bent to shapes required including cranking, bending, spirally hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia complete all as specified and directed. |
| 23 | Supply and fix Mild steel TMT bars round bars 6mm dia to 8mm dia cut to length, bent to shapes required including cranking, bending, spirally hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia complete all as specified and directed. |
| 24 | Material and labour RCC (nominal mix) 1:2:4, type B0 (using 12.5mm gradeded stone aggregete) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span concrete complete all as specified and directed. |
| 25 | Dismantling of Single layer mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 26 | Dismentling of battens for tiles, shingles etc, exc 15cm spacing of any size including tilting fillets complete all as specified and directed. |
| 27 | Dismantling framed work of fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 28 | Dismantling of plain or corrugated steel sheeting, any guage, thickness from roof covering complete all as specified and directed. |
| 29 | Supply and fix Pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed Note:-Design/ Pattern of roof sheet shall be approved by Garrison Engineer. |
| 30 | Supply and fix Prepainted galvalume aluminium zinc coating (AZ-150) GI based plain sheet 0.50mm thick of any colour having tensile strength of 550mpa as in roof covering, fixed with self tapping screws complete all as specified and directed |
| 31 | Dismantling wrought iron or mild steel work complete all as specified and directed |
| 32 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W(Gde-E-250) Quality 'A' complete all as specified and directed |
| 33 | Dismantling wooden boarding, any description , fixed in any position with nails complete all as specified and directed and directed. |
| 34 | Supply and fix plain or coorugated steel sheets any thickness in available sizes complete all as specified and directed and directed |
| 35 | Supply and fix 2nd class softwood 20mm thick boarding clean sawn as in eaves board/facia board fixed with nails complete all as specified and directed |
| 36 | Dismantling of wall and ceiling boards( fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed. |
| 37 | Supply and fix anodised aluminium snap grid frame work for false ceiling all as specified size of grid 605 x 605 mm including hanging with mild steel 3mm dia wire in suitable length complete all as specified and directed. |
| 38 | Supply and fix 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium framework with screws of size 600mmx600mmx4mm in ceiling fixed as per manufacturers instructions ccomplete all as specified and directed. |
| 39 | Supply and fix in repair stailess steel grating 100 mm dia in floor complete all as specified and directed. |
| 40 | Supply and fix in repair CP bib taps, cast copper alloy, fancy type, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore steel tube in repairs complete all as specified and directed. |
| 41 | Supply and fix in repair vitreous China wash down water closet pan (Pedestal pattern) white including seat cover and pvc flush pipe of 32 mm dia for low level cistern leak proof complete all as specified and directed |
| 42 | Supply and fix in repair PVC low level flushing cistern symphonic action type, low level white 10 litres capacity with ISI mark including inlet ball valve float, handle and brackets and connection to pipes etc. complete all as specified and directed. |
| 43 | Supply and fix in repairs vitreous china wash basin white flat back size 580 x 450 mm excluding taps, but including cutting for and pinning in ends of brackets, waste pipe and brackets all as specified and directed. |
| 44 | Supply and fix in repairs concealed stop cock regular body, quarter turn with flange Chromium plated fancy type of size 15mm complete all as specified and directed |
| 45 | Supply and fixin repair cast copper alloy chromium plated fancy type pillar tap 15mm dia fixed in repairs complete all as specified and directed |
| 46 | Supply and fix in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long complete all as specified and directed |
| 47 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and directed. |
| 48 | Supply and fix in repair pvc connection 15mm with PTMT nuts of length 450mm long and taking down old one complete all as specified and directed |
| 49 | Supply and fix in repairs CP shower rose fancy type 125mm size complete all as specified and directed and directed. |
| 50 | Supply and fix in repair PVC health faucet with 1 meter flexible tube including necessary fitings complete all as specified and directed |
| 51 | Supply and fix in repairs ball valves, 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 52 | Supply and fix in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends on CPVC pipe incl necessry fittings of size 20mm bore dia complete all as specified and directed |
| 53 | Taking up or down 15mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site as directed. |
| 54 | Supply and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 55 | Taking up or down 20mm bore galvanised steel tubing and connections including cleaning for refixing or removal from site complete all as specified and directed. |
| 56 | Supply and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 57 | Dismantling water tanks Exc 250 ltrs capacity & n exc 500 ltrs capacity and removing from site complete all as specified and directed. |
| 58 | Supply and fix Rotational moulded polyethylene water storage tanks (ISI marked) of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and directed. |
| 59 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickeness (below or above ground level) complete all as specified and directed. |
| 60 | Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base of floor complete all as specified and directed |
| 61 | Material and labour for Chequered cement concrete tiles of size 30cmx30cm x25mm thick, with mix of grey cement and pigments, set, jointed and pointed in neat cement slurry and pointed with grey cement and pigments in floors including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 62 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickeness(below or above ground level) complete all as specified and directed. |
| 63 | Material and labour 75 mm thick cement concrete Type C2 1:3:6 (40 mm graded aggre-gate) as in plinth protection / pavement complete all as specified and directed. |
| 64 | Material and labour Providing 100 mm cement concrete 1:3:6 Type C2 (40 mm graded aggregate) in cement concrete in sub-floors, sub-bases, floors and paving, etc. complete all as specified and directed and directed. |
| 65 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store measured overall as fixed along the centre line over fittings and accessories. |
| 66 | Supply and fix euro guard Pro square UPVC rainwater gutter (180 MM), with all necessary fittings, clamp, joints, end cap,corner drop centre drop, etc joining compounds, nut & bolts or screw etc and fixing in position at any height complete all as specified and directed. |
| 67 | Supply and fix in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 68 | Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed. |
| 69 | Supply and fix Steel rolling shutters gear operated type with bevel gear box and crank handle having thickness of lath 1.25mm, with out ball bearing, as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete all as specified and directed. |
| 70 | Supply and fix Steel rolling shutters push pull or manual type having thickness of lath 1.25mm, with out ball bearing, as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete all as specified and directed |
| 71 | Supply and fix repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed |
| 72 | Supply and fix repair Ball bearing for rolling shutters complete all as specified and directed |
| 73 | Cutting/pruning of tree trunk of girth exc 30 cm and not exc 100 cm including cutting of trunk and branches portion approximate 10 Nos and max length is 25 mtr protruding over ground, eveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and directed |
| 74 | Surface dressing n.exc 15 cm deep in hard and dense soil complete all as specified and directed |
| 75 | Material and labour for hardcore gause exc 63 mm , diposited, spread and levelled in layers n exc. 15 cm thick,watered and rammed to a true surface complete all as specified and directed |
| 76 | Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base of floor complete all as specified and directed |
| 77 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Grade with grey cement & pigment glossy polish etc including 50mm thick bedding with 6 to 10 mm graded coarse aggregate complete all as specified and directed . complete all as specified and directed |
| 78 | Material and labour for PCC 1:2:4 type B-1(using 20 mm graded stone aggrgate) as in coping on wall including weathering, slightly rounded or chemfered angles or throating as directed complete all as specified and directed |
| 79 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed and directed. |
| 80 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed |
| 81 | Material and labour for One light point wiring controlled by one switch 5 Amps one way single pole complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through and including rigid non-metallic PVC conduit medium grade including Modular plate of suitable sizes and including sunk type CI/steel terminal boxes concealed in wall including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor connecting to common earth dolly complete all as specified and directed |
| 82 | All as per item No 81 here in before but one fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed |
| 83 | All as per item No 81 here in before but one three pin 5 Amps socket out let on independent board complete all as specified and directed |
| 84 | All as per item No 81 here in before but one 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and directed |
| 85 | All as per item No.81 here in before but point wiring of copper cable multi stranded 2.5 Sqmm size for 15 Amps socket outlet on independent board with 2.5 Sqmm of earth conductor complete all as specified and directed |
| 86 | Supply and fix in repair ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed |
| 87 | Supply and fix in repair modular switch piano, flush button type, single pole, One way 6 Amps complete all as specified and directed |
| 88 | All as per item No 87 here-in-before but 16 Amps complete all as specified and directed |
| 89 | Supply and fix in repair modular socket outlet 3 pin and 2 pin, 06 Amps, flush type, two module complete all as specified and directed |
| 90 | All as per item No 89 here-in-before but 6/16 Amps combined complete all as specified and directed |
| 91 | Supply and fix in repair stepped type modular electronic fan regulator two module complete all as specified and directed |
| 92 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directedMake : Havells /Wipro/Philips |
| 93 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 94 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directedMake - Havells/ CG/ Philips. |
| 95 | Material and labour for sub main wiring with two runs of 6 sqmm single core, PVC insulated & unsheathed cable 1100 volts grade FRLS with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit medium grade fixed to the surface of walls/ ceiling as per ISS including one run of 6 mm size PVC insulated copper conductor complete all as specified and directed |
| 96 | All as per item No 95 here-in-before but 4 x 6 Sqmm and 1 x 6 Sqmm as earth wire complete all as specified and directed Make:- Finolex/Havells/Standard. |
| 97 | Material and labour for sheet metal enclosure Double door DB SPN for distribution 8 way with 200 A, rated busbar for distribution including taking down old DB complete all as specified and directed. Make- Havells/Indo Asian/ Sigma |
| 98 | Supply and fix in repair for load line distribution board double door type, TPN, vertical, 4 way, complete with incoming frame three pole , including bus bar, neutral link, blanking plates etc.complete all as specified and directed and directed. |
| 99 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB complete with connection testing and commissioning including taking down old DB. |
| 100 | Supply and fixing in replacement 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning. |
| 101 | Supply and fixing in replacement 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN/4 poles and current carrying capacity 40 to 100 Amp in the DB complete with connection testing and commissioning. |
| 102 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
| 103 | Supply and fix cabin fan wall mounted 450 mm sweep ,230 Volt complete all as specified and directed and directed. |
| 104 | Supply and fix Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm heavy duty sweep with, blades, and frame and louvers complete all as specified and directed and directed. |
| 105 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts, checknuts and washers of galvanized iron or steel as shown in electrical plate No 3 connected to earthing test point including testing on completion complete all as specified and directed Note:- The unit rate quoted shall be include for necessary excavation and earth work , earth strip connected to test point max 7 mtr as per site requirement, PCC 1:3:6 type for earth pit & Pit cover, funnel with wire mesh including GI medium grade watering pipe 15mm bore & 40 mm dia for supporting of earth strip/wire. |
| 106 | Supply and fix in replacement LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed Please Enable Macros to View BoQ information |
