|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description not exceeding 1.00 Sqm each complete all specified and directed. |
| 4 | Taking down shutters of any description1 but n exc 3.00 Sqm each complete all specified and directed. |
| 5 | Dismantling steel work including doors, gates etc., complete all as specified & directed. |
| 6 | S & F MS framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. |
| 7 | S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 8 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats |
| 9 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 11 | Taking down old unserviceable PVC/FRP doors and windows including frame fixed in any position and of any size complete all as specified |
| 12 | S & F in replacement anodised aluminium frame for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 13 | M&L replacement aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed. |
| 14 | S&F in replacement anodised aluminium Powder coating door shutters aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron) including necessary joining cleats, glazing clips, ruber neoprene packing , hinges,anodised aluminium snap beading screws,two numbers aluminium anodised handles,Aluminium anodised tower bolt 01 No 150 mm and sliding bolt 01 no 250 mm aluminium anodised and 03 nos stainless steel hinges etc complete all as specified. |
| 15 | S & F replacement anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 16 | S&F aluminium composite panel sheet 6 mm thick high pressure laminated sheet in wooden texture for wall cladding and gate application of aluminium /stainless steel exterior type complete all as specified and directed |
| 17 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 18 | S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.. |
| 19 | S & F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 20 | S & F 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and olyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 21 | S & F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations , fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards , shelves, including tape on edge's & including frame work and etc including taking down old any type cupboards , shelves etc all as specified and directed. |
| 22 | S&F in replacement high density highdensity high moistre resistant (HDHMR) Boards of 16 mm to 18 mm thick density more than 850 Kg/m3 for better compactness and strength due to its fibrous homogeneous construction can be profiled, carved, moulded, routed, borer resistant,termite resistant Characteristics as per ISI Standard of water resistance prelaminated both sides of shade/tint as approved by GE used as in kitchen cupboards,room cupboards,partitions, fixed with stainless steel screws to framework of timber or steel etc complete all as specified and directed |
| 23 | S & F 100mm size butt hinges stainless steel complete all as specified and as directed. |
| 24 | S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed |
| 25 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 26 | S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed |
| 27 | S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 28 | Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads. |
| 29 | S & F 4mm thick sheet glass , ordinary quality and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 30 | S & F 4 mm thick figured glass , pin head type and glazed with oil putty in square not exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 31 | S & F 4.80 mm thick sheet glass , tinted (black or navy blue) and glazed with oil putty in fixed complete all as specified and directed. |
| 32 | S & F stainless steel wire cloth 0.36mm normal dia of wire and average width a apparture 0.56 mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 33 | S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 34 | M&L MS Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work . |
| 35 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed. |
| 36 | S & F aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws |
| 37 | S & F 40 mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed. |
| 38 | S & F magnetic catches for cupboard , shelves, etc |
| 39 | 50 mm size cup board locks of brass including keys set,2 levers, complete all as specified and as directed. |
| 40 | S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed. |
| 41 | S & F in repairs stainless steel Curtain Rod 25 mm dia with brackets fixed with stainless steel screws for fixing to wall etc complete all as specified and as directed. |
| 42 | Supply only side funnel/latto stainless steel for curtain rods complete all as specified and directed |
| 43 | Providing and fixing in replacement GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 44 | S&F in repair WPC louvers as in wall panelling 100 % waterproof ,termite proof ,fire retardant (self extinguishing) high impact resistant 20 to 28 mm thick and interlocked using tongue and groove system for seamless WPC panels including all fixing arrangements to walls complete all as specified and directed |
| 45 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc Complete all as specified and directed |
| 46 | M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed. |
| 47 | M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm birla white putty complete all as specified and directed. |
| 48 | M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building. |
| 49 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed. |
| 50 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 51 | Demolition or cement concrete (unreinforced) of any description and in any position |
| 52 | M L for PCC 1:3:6 type C-2 (40 mm graded Aggregate) as in sunkern floor , fdn, mass concrete etc allas specified and directed |
| 53 | M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed Please Enable Macros to View BoQ information |
| 54 | M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed Please Enable Macros to View BoQ information |
