|
| 1 | Excavation in foundation and trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting soft or hard rock or by chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming / dressing of sidesand bed stacking the excavatted soil clear from the edge of excavation and returning the excavated soil after completion of work in 15cm layers when required into plinth , sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Providing and laying cement concrete 1:3:6(1cement :3 sand: 6graded crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:1:2 (one cement :one sand : two graded crushed stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement in all leads and lifts in:- Foundation ,footings bases of columns and the like mass concrete in all leads and lifts. |
| 4 | Walls any thickness but not less than 0.1 mtrs. thickness attached pillasters , plinths and string courses etc.from top of foundation level upto floor two level in all leads and lifts . |
| 5 | Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs. and removal of the same for in-situ reinforced concrete and plain concrete work including all leads and lifts. Vertical surface such as walls(any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like |
| 6 | Flat surfaces such as soffits of suspended floors,roofs, landings and the like.Floors etcupto 200mm in thickness. |
| 7 | Providing and laying cement concrete 1:1.5:3(one cement :one and half sand : three graded crushed stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in all leads and lifts in Suspended floors, roofs, landing, shelves and their supports balconies, lintels, beams girders bresumers and cantilevers upto all floor two level . |
| 8 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including all leads and lifts |
| 9 | Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in gratings framed, guard, bars, ladders, railling, brackets and similar works. |
| 10 | Fixing of GMS tube 80mm dia (light grage) for inlet, outlet and scour in all leads and lifts. |
| 11 | Providing and fixing cast Iron double flanged sluice valve as per IS:14846/2000 latest with upto date ammendments of Kirloskar / Leader / KSB / Kartar / Pelican make of following diameter, PN-1 including MS Flanges Table - 17, confirming to IS: 6392-1971 or latest with upto date ammendments including cutting of pipes wherever required, welding in three layers (leak proof) confirming to specifications as perescribed in relevant IS code i.e. IS: 816-1969 or latest as applicable with upto date ammendments with nuts, bolts, washers & specials etc. confirming to relevant IS code or latest with upto date ammendments including packing sheet i.e. asbestos fibre sheet minimum 3mm thick and painting with anticorrosive paints complete in all respect including all leads and lifts and as per entire satisfaction of the Engineer-in-charge. 80mm dia |
| 12 | Providing & fixing Man hole cover with frame (size 500x500) with MS sheet 2.00 thick with hinges on MS angle iron frame 32X32X3 mm supporting with 40X5 mm flat with base frame 40X40X5mm duly welded and fixed in RCC slab with anchor bolt 12mmx150mm i/c cost of welded charges, carriage fixing and applyaing priming coat and locking arrangement complete in all respect as per entired satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
