|
| 1 | Description of Item |
| 2 | Demolishing Brick work Manually/ by mechanical means Including Stacking of erviceable material and disposal of unseviceable material within 50 metres lead as per direction of Engineer -in-charge.Cement Mortar. (DSR 2023, SI No. 15.7.4) |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix. (DSR 2023, SI No. 15.2.1) |
| 4 | Demolishing R.C.C. work Manually by mechanical means Including Stacking of Steel bars and disposal of unseviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 2023, SI No. 15.3) |
| 5 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. (DSR 2023, SI No. 15.5) |
| 6 | Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.. (DSR 2023, SI No. 15.6) |
| 7 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. (DSR 2023, SI No. 15.18) |
| 8 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (DSR 2023, SI No. 15.57) |
| 9 | Taking out existing CC interlocking paverblocks from footpath /centra lverge, including removal of rubbish etc. ,disposal of unserviceable material to the dumping ground ,for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (DSR 2023, SI No. 16.83) |
| 10 | Excavating, supplying, stacking and filling of local earth (excluding royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. (Based on DSR 2023, SI No. 2.25a) |
| 11 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (All kinds of soil.) (DSR 2023, SI No. 2.6.1) |
| 12 | Providing and laying Cement concrete 1:4:8 (1cement :4coar sesand :8 graded stone ballast 40mm . nominal size ) including supply of all materials, labour and T& Petc .required for proper completio no the work and curing complete , also including cost of formwork in foundation. (DSR 2023, SI No. 4.1.8) |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. (DSR 2023, SI No. 5.2.2) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 2023, SI No. 5.22.6) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1;6. (DSR 2023, SI No. 6.4.2) |
| 16 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR 2023, SI No. 16.69) |
| 17 | Construction of KC drain with pre cast CC block size (325×400x120mm) laid in flat position and size (325x300x125 mm) laid in vertical over 100 mm thick 1:4:8 P.C.C (1 cement ,4 coarse sand and 8 stone ballast 40 mm thick) and 12 mm thick 1:4 cement mortar (1 cement and 4 coarse sand) including jointing the CC blocks with neat cement including supply of all materials , labour and T&P etc, required for proper completion of the work as directed by E.I. (Analiysis Rate) |
| 18 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer ,over the plastered wall surface to prepare the surface even and smooth complete. (DSR 2023, SI No. 13.80) |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. (DSR 2023, SI No. 13.85.3) |
| 20 | Wall painting with acrylic emulsion paint (upto 2 coats), having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. (DSR 2023, SI No. 13.82.2) |
| 21 | Precasting and placing in position 200 mm dia bollard 600mm high of required shape . At bottom embedded 150 mm cement concrete 1:3:6 (1cement : 3 coarse sand (zone iii ) derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources ), including necessary excavation of size 235x325x450mm deep for the same in bitumen/concrete pavement at specified sapcing. (Analysis Rate) |
| 22 | Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading, pre mixed with bituminous [email protected] percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (PWD Rate) |
| 23 | Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. New work (Two or more coats). (DSR 2023, SI No. 16.48.1) |
| 24 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 2023, SI No. 16.91.2) |
| 25 | Road signage (PSR) |
| 26 | SCULPTURE (Paid as per actual) |
| 27 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). (DSR 2020 Hort, SI No. 2.13) |
| 28 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). (DSR 2020, Hort SI No. 2.3) |
| 29 | Supplying and stacking at site addition mixure Vermi compost (jaivik) sampurna / organic manure as per direction of engineer-in-charge. (PSR) |
| 30 | Supplying and stacking at site addition mixure of neem cake, bone mil ,DAP as per direction of engineer-in-charge. (PSR) |
| 31 | Applying insecticide pestiside with chlorpyriphos, sulfer oxide , as per direction of engineer-in charge. (PSR) |
| 32 | Providing and spraying Colloidal Silver Nano Partical ultra High Purity solution in bed kyari as specified or directed by the Officer-in-charge (PSR) |
| 33 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. (DSR 2020 Hort, SI No. 2.33) |
| 34 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge. (DSR 2020 Hort, SI No. 5.14) |
| 35 | Providing and displaying Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in 30 cm size of Earthen pot / Plastic pot. (DSR 2020 Hort, SI No. 10027) |
| 36 | Providing and Displaying of Dracaena pendanus, well developed, having 6 to 8 suckers with healthy foliage in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. (DSR 2020 Hort, SI No. 3.51) |
| 37 | Providing, fabricating and fixing MS CNC laser cut decorative jali of approved pattern and thikness including MS supporting frame, welding, grinding, primer and painting complete as per direction of engineer - in - charge. (MR) Please Enable Macros to View BoQ information |
