Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:56:10 (1 cement : 5 coarse sand (zone-llIl) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form forShelves (Cast in situ) |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black,Area of slab upto 0.50 sqm |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black,Area of slab over 0.50 sqm |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood. |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 12 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm |
| 13 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge.Wire mesh / Glazing of plain/ toughened/ laminated/double glass unit with / without high performance coatings as per design requirements and conforming to 1S: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speedsTwo track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (60 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). |
| 14 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm |
| 15 | Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mm |
| 16 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 17 | Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. |
| 18 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 19 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part 1) :2011 (Board with BIS certification marks) |
| 20 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board |
| 21 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. |
| 22 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 23 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats |
| 24 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 25 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 26 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm |
| 27 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “8S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in chargeOrissa pattern W.C Pan of size 580x440 mm |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in - charge.Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) |
| 29 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 30 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 31 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area beyond 3 sq. metres |
| 32 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 33 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 34 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 35 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead:100 mm dia pipe |
| 36 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :15 mm to 40 mm nominal bore |
| 37 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :Above 40 mm nominal bore |
| 38 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 39 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge |
| 40 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 41 | Providing and fixing soil, waste and vent pipes100 mm diaSand cast iron S&S pipe as per 1S: 1729 |
| 42 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 (1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe |
| 43 | Providing and fixing plain bend of required degree.100 mm diaSand cast iron S&S as per IS : 3989 |
| 44 | Providing and fixing single equal plain junction of required degree100x100x100 mmSand cast iron S&S as per IS - 1729 |
| 45 | Providing and fixing collar :100 mmSand cast iron S&S as per IS - 1729 |
| 46 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors100 mm inlet and 100 mm outletSand cast iron S&S as per 1S: 3989 |
| 47 | Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :100 mm diameter pipe |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 50 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall32 mm dia nominal bore |
| 51 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall50 mm dia nominal bore |
| 52 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) :25 mm nominal bore |
| 53 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) :32 mm nominal bore. |
| 54 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) :40 mm nominal bore |
| 55 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) :50 mm nominal bore |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 57 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 58 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and 1S: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionof powder coating 50 micron) |
| 59 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 60 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 61 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sgm mixed with water proofing cement compound @ 0.253 kg/sgqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sgm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured. |
| 62 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge75mm average thickness |
| 63 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge50mm average thickness |
| 64 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness |
| 65 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter |
| 66 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter |
| 67 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia. |
| 68 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 69 | Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)50mm thick in Grade M 25 with cement content not less than 330 kg per cum |
| 70 | Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of RCC member. Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)75mm thick in Grade M 25 with cement content not less than 330 kg per cum |
| 71 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.)Epoxy injection grout in concrete/RCC work of approved make |
| 72 | Providing and fixing Ist quality Glazed Vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.a) Size of tile 600X 600 mm |
| 73 | Providing and fixing Ist quality Glazed Vitrified wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.a) Size of tile 600X 1200 mm |
| 74 | Providing and fixing mirror of 6 mm thick superior glass (of approved quality) and of required shape and size with American skin glass moulding frame of approved make and shade with 6 mm thick hard board backing complete as per direction of Engineer-in-Charge |
| 75 | Total Cost Including 3% and Add GST factor & Cost Index @ 3% |
| 76 | Providing and fixing Grab Bar Wall mounted 600 mm long with necessary fitting and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat WAC-WHT-BR0600N), 2. Cera (Cat. No. B2210106), 3. Parryware (Cat No. T6605A1),4. Euronics (Cat EGR01(600MM) |
| 77 | Providing and fixing L Shaped Wall Mounted Grab Bar with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Cera (Cat. B2210103), 2- Euronics: (Cat EGR04LN)3- Jaquar (Cat:WAC-SAP-BAD090CS) |
| 78 | Providing and fixing Vertical Swing Grab Bar with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat No. WAC-SAP-BG0800CSN), 2- Cera (Cat. No. B2210107), 3- Parryware (Cat No. T6608A1), 4- Euronics (Cat EGRS02) |
| 79 | Providing and fixing Disabled Grab Bar U Shaped Rail U shaped rail with wall and floor mounting 600 x 100 mm with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Cera (Cat: B2210101),2- Perk (Cat: DP-8801-2),3- Euronics India (Cat: EGR03). |
| 80 | Providing and fixing DISABLED URINAL SAFETY STEEL GRAB BAR-Material : 18-8 S, Type-304 Stainless Steel, Application : Urinal Area, Diameter : 32 mm with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics India Cat: EGR5U, 2- American Standard (Cat: 80602657), 3- Pakai (Cat: PK-BF-8821SS). |
| 81 | Providing and fixing Grab Bar Aluminum Grip : Anti Slip Grip Installation : Wall Mounted Compatible : With all Types of WC’s Foldable : 90 Degrees Max Load Capacity : 160 Kg Ideal For : Senior Citizens, Limited Mobility, Expectant Mothers Dimension : 600mm (L) x 100mm (W) x 210mm (H) with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics Cat:ESGR10,2- Perk (Cat: DB-725Y),3- Pressalit (Cat: R7434112). |
| 82 | Providing and fixing Health Faucet with 1.2 Meter Long Flexible Tube & Wall Hook including CP Flange in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics (Cat EHF10), 2- Jaquar (CAT No-ALD-563), 3- Cera (Cat No. F8030107AB) 4- Hindware (Cat No. F160192). |
| 83 | Providing and fixing Soap Dispenser with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:. 1- Euronics: Soap Dispenser Cat:ES43. 2- Jaquar: Soap Dispenser - Cat: ACN-1135N.3- Cera: Soap Dispenser Cat:F5013111CH. |
| 84 | Providing and fixing Automatic Soap Dispenser with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- OBSESSIONS (Cat: SKU:8907831115977), 2- Euronics (Cat:ES83AC) 3- Askon Hygiene (Cat: ASD-140AD-CG/ASD-140AS-CG). |
| 85 | Providing and fixing Paper Towel Dispenser with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make: 1- Jaquar: Paper Towel Dispenser/Towels with c/z Folds - Wall Mounted/AISI 304 stainless steel finish: satin of capicity:400-600 C/Z towels (Cat No. PTD-SAP-DT0106CSN).2- Euronics India: Paper Towel Dispenser (Capacity: 500 Towels), S.Steel Cat-GEP01.3-Georgia-Pacific Combi-Fold Paper Towel Dispenser, Black (Cat:10036500311114). |
| 86 | Providing and fixing Fragrance Dispenser (LCD-with Digital Programming (Timer)) Construction : 304 JINDAL Grade Stainless Steel Battery : 2 x AA Size Spray Interval : Digital Programming (Timer) Installation: Wall mounted Refill Low Reminder: Yes Battery Low Reminder: Yes Key and Lock: Yes with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make: Dimensions: 80(L) x 55(W) x 235(H) 1- Euronics (Cat: GEA66S),2- Unswervingly (Cat:428992550). |
| 87 | Providing and fixing Angular Stop Cock with Wall Flange in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat No. OPP-15053PM), 2- Cera (Cat No. F1005351GG),3- Hindware (Cat No. F530043) |
| 88 | Providing and fixing C.P. brass toilet paper holder in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make: 1- Euronics: S.Steel Toilet Paper Holder (With Flap) Cat:EPH04F2- Jaquar: Toilet Roll Holder with Stainless Steel Flap Cat-ACN-1153S.3- Cera: Paper Holder with Flap Guard/Cat-F5013110CH.4- Roca: DOBLA TOILET ROLL HOLDER TO SCREW/Cat:RA390411001. |
| 89 | Providing and fixing Click Clack Waste 32mm Size Full Thread With 80mm Height in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat No. ALD-727),2- CERA (Cat No. F8050351CH) 3- Hindware (Cat No. F860032) |
| 90 | Providing and fixing Bib Cock Auto Closing System with Built-in Control Cock, Wall Flange & Elbow Operated Extended Lever in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat No. PRS-043MED),2- Hindware, 3- Cera,4- Parryware. |
| 91 | Providing and fixing Pillar Cock Auto Closing System with Elbow Operated Extended Lever in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar (Cat No. PRS-031MED)2- Hindware,3- Cera,4- Parryware. |
| 92 | Providing and fixing Central Hole Basin Mixer with Popup Waste System with 450mm Long Braided Hoses of Jaquar (Cat QQP-7169BPM) or equivalent in all respect with all connection, necessary fittings and screws etc. All complete as per direction of Engineer-in-charge. |
| 93 | Providing and fixing Rain Shower 150mm SS304 i/c Exposed Part Kit (Regular Flow Diverter), Concealed Part of Single Lever Diverter-40 mm & Spout With Wall Flange in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics (Cat AL023D + RIV-1017R + AL004D + RIV-1008R ), 2- Jaquar (Cat OHS-1665 + OPP-15079NKPM + ARC-87065C + SOL-6441K), 3- Cera (Cat F7010506AB + F2013701 + F4010101 + F1018661). |
| 94 | Providing and fixing Connection Pipe in all respect with necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Jaquar: 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers)/CAT:ALD-803AB).2- Cera: (Geyser Connection Pipe, 12 mm dia, 450 mm length/Cat-F8070403).3- Parryware: (SS Braided Hose Pipe 450 mm/Cat:T754099). |
| 95 | Providing and fixing white vitreous Table top Wash Basin equivalent in all respect with all connection, necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:. 1-Cera: Thin Rim Table Top Wash Basin - Snow White, Size:600 x 380 x 150 mm (Cat A2020127SN) i/c Bottle Trap of size: 300 mm (12”) (Cat F8060401).2- Jaquar: Table Top Basin of size: Size: 450x450x170 mm (Cat: JDS-WHT-25905) i/c Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange (Cat: ALD-769L300x190).3- Somany: PLATTER Art Basin of Size: (WxPxH) 560x325x140mm i/c Echo Bottle Trap with 300 mm pipe (Cat 272150580021). |
| 96 | Providing and fixing Wall Hung Basin with Fixing Accessories of size 650x565x155 mm of Jaquar Cat-DIS-WHT-93801 or equivalent in all respect with all connection, necessary fittings and screws etc. All complete as per direction of Engineer-in-charge. |
| 97 | Providing and fixing Sensor Urinal in all respect with all connection, necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics: Urinal Dimension (mm):358(L) x 320(W) x 635(D) (Cat C020-UR) i/c Sensor Urinal Flusher (Recessed) Mounting – Recessed Operation – Self Flush Infra-Red Sensor + Manual Push Button Working Water Pressure – 0.1 MPa – 0.7 MPa Sensing Range – 65 cm Power – Electrical (AC 220V, 50Hz) + Battery (4x AA Duracell) Dia of inlet/Outlet Pipe – Dn 15 (G1/2″) Pressure – 1 Bar 2 Bar 3 Bar Water Discharge – 0.22L 0.33L 0.40L (EU54BE).2- Jaquar: Urinal (Back Inlet) with Fixing Accessories of size:340x325x650 mm Cat:URS-WHT-13263 with Sensor Concealed Type Flush Valve for Urinal Complete set with Installation Box & Control Valve (9V transformer) (Cat:SNR-STL-51077E).3- Kohler: Square urinal with rear inlet in white of size 326mm x 363mm x 616mm (K-26474IN-ER-0) i/c Urinal sensor in polished chrome (Cat K-24199IN-C01-CP). |
| 98 | Providing and fixing Rimless Wall Hung WC with UF soft close slim seat cover, Hinges, Accessories Set of Size: 380x515x360 mm of make Jaquar (Cat CNS-WHT-963UFSM) i/c Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (Cat JCS-WHT-2400WS) & Control Plate Opal (Cat JCP-CHR-152415) or equivalent of approved shape in all respect with all connection, necessary fittings, screws, seat cover & cistern, nuts & bolts, gasket etc. All complete as per direction of Engineer-in-charge. |
| 99 | Polishing in high gloss/matt finish PU Polish of make: Asian Emporio, ICA, Sirca, Nerolac in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. 2. Applying 1st coat PU exterior sealer with sprey gun and then rubbed with sand paper of 320/400 nos and wipe clean. 3. Applying 2nd coats of PU exterior sealer with spray gun and then rubbed with sand paper of 320/400 nos and wipe clean 4. Applying 1st coat of PU exterior of matt/glossy finish with sprey gun and then rubbed with sand paper of 320/400 nos and wipe clean 5. Applying 2nd coat of PU exterior of matt/glossy finish with spray gun. Note:-Allowing sufficient drying time for 1st coat and 2nd coat of sealer is allowed to dry for 8 to 12 hrs. not exceeding 72 hours & allowing sufficient drying time for 1st coat and 2nd coat of PU exterior is allowed to dry for 12 to 14 hrs. not exceeding 72 hours. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade wood fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 8 to 12 hrs. All complete as per direction of Engineer-in-charge. |
| 100 | Providing and fixing SANITARY NAPKIN HYGIENE PANEL (4IN1) - FOR FEMININE WASHROOM Combination : Sanitary Napkin Dispenser / Toilet Paper Holder / Disposable Bag Dispenser / Waste Receptacle Sanitary Napkin Capacity : 20-25 Pcs, Waste Receptacle Capacity : 4.6 Litres, Equipped With Full-length Stainless Steel Piano Flap, Disposable Bags Capacity : 50 Bags, Dimension : 600mm (H) x 330mm (W) x 130mm (D) in all respect with all necessary fittings and screws etc. All complete as per direction of Engineer-in-charge, premium series of make:1- Euronics (Cat: ESN04B),2- Sudhai (Cat: SSN04B),3- Novatech (Cat: NT-SHP03). |
| 101 | Providing & fixing Urinal modestry panel made out of 12mm thick compact laminates urea free, thermo setting phenolic resins treated Kraft papers as core material and resin treated decor papers on the finish surface, conforming to latest and applicable EN 438 quality standards of make Centuary, Action Tesa, Greenlam, Merino of size of UMP : 450mm (D)X1200mm (H) |
| 102 | Providing and fixing of Toilet Cubicle (including doors width as per drawings/direction of Engineer-in-charge) made of heat, bacteria, water, chemical, scratch and impact resistant 12mm thick solid Phenol compact High Pressure laminate sheet panels tested . Finish of the compact laminate should be Suede. which includes doors, pilasters & intermediate panels finished with approved shade as per the detail drawings & as per EN- 438 (European Standard) and as per fire retardant EN 438-2 (Section 30 CGS) standard including providing and fixing in position necessary hardware made out of Stainless steel (Grade 316/304) as required including the following minimum hardware:. The product should have Green Guard Certificate.(1) Door Knob in Grade-304 with L key lock system)(2) Spring Loaded butt Hinges in Grade-304(3) Thumb turn lockset with Occupancy indicator in Grade-304(4) Coat hook with rubber door stopper in Grade-304(5) Adjustable pedestal in Grade 316(6) Square Box Top rail in Grade-304(7) Noise absorbing tape(8) Screws & PVC Wall Plugs in Grade 304(9) U-Channel in Grade-304(10) Door Stopper in Grade-304 Providing and fixing of Toilet Cubicle (including doors width as per drawings/direction of Engineer-in-charge) made of heat, bacteria, water, chemical, scratch and impact resistant 12mm thick solid Phenol compact High Pressure laminate sheet panels tested . Finish of the compact laminate should be Suede. which includes doors, pilasters & intermediate panels finished with approved shade as per the detail drawings & as per EN- 438 (European Standard) and as per fire retardant EN 438-2 (Section 30 CGS) standard including providing and fixing in position necessary hardware made out of Stainless steel (Grade 316/304) as required including the following minimum hardware:. The product should have Green Guard Certificate.(1) Door Knob in Grade-304 with L key lock system)(2) Spring Loaded butt Hinges in Grade-304(3) Thumb turn lockset with Occupancy indicator in Grade-304(4) Coat hook with rubber door stopper in Grade-304(5) Adjustable pedestal in Grade 316(6) Square Box Top rail in Grade-304(7) Noise absorbing tape(8) Screws & PVC Wall Plugs in Grade 304(9) U-Channel in Grade-304(10) Door Stopper in Grade-304 |
| 103 | Providing and Installing WPC FLEXIBLE fluted panel for curvilinear areas of thickness 24 mm as per approved design over and above existing finished base. as per site requirement with all accessories,corners and fitting complete in all respect as per the direction of engineer in charge. |
| 104 | Lacquered Glass Panelling : Providing and fixing 6mm thick lacquered glass (matte lacquered glass, some in satin finish, mettalic, textured , printed lacquered glass in the basement , if required) paneling having 12mm thick ply / mdf backing over existing surface as per detail drawing. The glass edges to machine polished & fixed with natural silicon sealant of Dow Corning or approved in joints complete as per design and drawing. |
| 105 | Providing and fixing Stainless Steel Pull Handles (SS304) D Type (Pair) Handle make Doorset Cat no. SD18PSS of size 450mm i/c necessary screws etc. all complete as approved by Engineer-in-charge. |
| 106 | Providing and fixing Mortice Dead Locks Standard of make Doorset Cat no. ML112 SS/PT or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 107 | Providing and fixing Euro Profile Cylinders 1CK 60 mm of make Doorset Cat no. CL-101 or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 108 | Providing and fixing Door Stoper - Door Mounted Hanging Type (Zamak) of make Doorset Cat no. DS HT (Z) or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 109 | Providing and fixing Door Buffer 75mm Rubber Black of make Doorset Cat no. DBRB-B or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 110 | Providing and fixing Euro Profile Cylinders Key and Knob (KNK) 60 mm of make Doorset Cat no. CL-101 or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 111 | Providing and fixing Anti-Bacterial Nylon, Folding Shower Seat, 350 X 450mm, Dia: 35mm of make Euronics Cat no. NDS01 or equivalent with nuts and screws etc. complete as per direction of the Engineer-in-charge. |
| 112 | Providing and fixing Rack Bolt for WC (Stainless Steel) of size 16mm of make Jaquar Cat ZPS-SNS-RB01 or equivalent in all respect with all connection, necessary fittings and screws etc. All complete as per direction of Engineer-in-charge. |
| 113 | Providing and fixing Wall Hung WC with UF Soft Close Seat Cover, Hinges, Accessories Set of size 350x750x340 mm of make Jaquar (Cat DIS-WHT-93951UF) i/c Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (Cat JCS-WHT-2400WS) & Control Plate Opal (Cat JCP-CHR-152415) or equivalent of approved shape in all respect with all connection, necessary fittings, screws, seat cover & cistern, nuts & bolts, gasket etc. All complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
| 114 | Providing and fixing Wall Hung WC with UF Soft Close Seat Cover, Hinges, Accessories Set of size 350x750x340 mm of make Jaquar (Cat DIS-WHT-93951UF) i/c Single Piece Slim Concealed Cistern with Wall Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (Cat JCS-WHT-2400WS) & Control Plate Opal (Cat JCP-CHR-152415) or equivalent of approved shape in all respect with all connection, necessary fittings, screws, seat cover & cistern, nuts & bolts, gasket etc. All complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
