|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavatory) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Laying, spreading and compacting stone aggregate of specified sizes to WBM pecifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, atering and compacting to the required density |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone ggregate 20 mm nominal size derived from natural sources) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 7 | Edges of slabs and breaks in floors and walls |
| 8 | Under 20 CM wide |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | CEMENT PLASTER (IN COARSE SAND) |
| 12 | 12 MM cement plaster of mix |
| 13 | 1:6 (1 cement: 6 coarse sand) |
| 14 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge.The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive pplied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all peration, material and required pattern approved by Engineer-in Charge: |
| 15 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 16 | Polished Granite stone slab of colour black, cherry/Ruby Red or equivalent. |
| 17 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge |
| 18 | Granite work |
| 19 | Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof labs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridgedeck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of heengineer-in-charge. The product performance shall carry guarantee for 10 years against any Leakage |
| 20 | For vertical surface two coats @ 0.70 kg per sqm per coat |
| 21 | For horizontal surface one coat @1.10 kg per sqm. |
| 22 | FOUNTAIN SPECIFICATIONS:- Designing, supply, erection, installation, testing and commissioning of foam Jet in a row fountain manufactured by an ISO certified company, each fully adjustable for a precision effect, Moc brass. With 1” Brass Ball joints and 1” Brass gate valve with all SS pipe fittings etc. complete |
| 23 | PUMPSET :- Designing, supply, installation, testing and commissioning of 5 HP Monoblock submersible pump, suitable for 03 phase, 415 V, 50 Hz AC power supply with foundationwork, nut- bolt, suction stainless steel mesh cover with connections etc. complete as required on site. |
| 24 | Supply, installation, testing & commissioning of weather proof IP55/42 protection Main electrical panel board cubical compartmentalised suitable for 415 V, 50 Hz, AC Power Supply,floor/wall mounted made of 2.0 mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights, selector switches, incoming/outgoing feeders, NO/NC contactors,CTS contactors complete including following specifications and requirement. 1 No. main 100 Amps 4 Pole MCCB. 1 set 150 Amps TPN Aluminium conductor bus bar. 4 Nos DoL panel starter system suitable for 05 hp, 03 phase, submersible pump sets including HRC fuses, contractor, relay, switches, timer etc. as reqd. on site. 6 Nos. 5-32 Amp. SPN MCB with contractor and timer system as reqd. Separate compartment for placement of drivers & controllers of RGB Lights with controls |
| 25 | Supplying and laying of 4*16 sq.mm. PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade aluminium conductor armoured cable as per IS, laying direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required as per standard practice and directions of EIC. |
| 26 | LIGIITS :- Designing, supply erection, cornrnissioning and testing ofwater proofLED lighting systcm rnanulacturcd by ISO certified company, shall change the colours continually RGB and produce 16.7 million colours shall consist of 27 watl 12/24 Y DC lights comprising high quality waterproof luminaries, rviring shall be ofreputed make double insulated PVC with copper conductor not less than 1.0 sq.mm connection shall be fully \yaterproof. Luminaries shall have die cast aluminium alloy bodies for strength and totally protccted by fused epoxy polyester coating on all surfaces. The dia of Luminaries l70rnmx40mm the nuts bolt and studs of ISI 304 standard slainless steel. With high quality elastomer gasket and a toughened glass and gland shall be IP 68 with programmable colour changing system including drivers, controllers and connections as required on site to operate these lights complete as per standard practice and directions of EIC. |
| 27 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. - 4 X 16 sq. mm (28mm) |
| 28 | MOTION CONTROL DEVICE :- Supply and fixing of 5 HP Motion Control device with rogrammable logical device of L&T/ Delta/ CICO |
| 29 | Designing, supply, installation testing and commissioning of programmable colour changing system with 6 station changing option of reputed makes. |
| 30 | Supplying & laying of Electric Cable for LED Light 4*1.5 Sq.mm pvc sheathed, flexible, stranded copper conductor cable with pvc conduit of medium strength. |
| 31 | Supplying & laying of Electric Cable for Pump Sets 3*4.0 Sq.mm pvc sheathed, flexible, stranded copper conductor submersible cable with pvc conduit of medium strength. |
| 32 | Providing and Fixing of UPVC /CPVC Plumbing work such as piping with fittings etc. complete as reqd on site. Please Enable Macros to View BoQ information |
