|
| 1 | Construction of Subgrade and Earthen ShouldersConstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site , spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per MoRT&H Technical Specification clauses of section 300. |
| 2 | Granular Sub-base with Well Graded Material By Mix in Place Method Construction of granular sub-base by providing well graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MoRT&H Technical Specification Clause 401 For Grading II Material |
| 3 | 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern:Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: |
| 4 | P.C.C grade M 20 Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).III P.C.C grade M 20(i) Nominal mix (1:2:4) |
| 5 | Excavation for Lined Drain & Hume Pipes:Earthwork in excavation for structures as per drawing and MoRT&H technical specifications Clause 304 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material.i. Ordinary Soil by Manual means upto 3m depth |
| 6 | PCC 1:3:6 for Lined Drain & Hume Pipes:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as per drawings & MoRT&H technical specifications Clauses 2100. (including centering, shuttering, staging etc. but excluding reinforcement) |
| 7 | PCC Grade M-20 for Lined Drain & Hume Pipes:Plain / Reinforced cement concrete in open foundation as per drawings & MoRT&H technical specifications Clauses 2100 1500, 1700, 2100. (including centering, shuttering, staging etc. but excluding reinforcement)B) PCC Grade M 20 |
| 8 | Brick masonry:Brick masonry work in cement mortar in foundation completed excluding pointing & plastering as per drawing & MoRT&H technical specifications Clauses 1300.IV) Brick masonry in 1:6 cement mortar |
| 9 | Pointing with cement mortar on brickwork in substructure as per drawing & MoRT&H technical specification Clauses 1300, 2200.II) In 1:4 cement mortar |
| 10 | Hume Pipe:Providing and Laying reinforced cement concrete pipe NP3 with collar for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per MoRD Technical specification Clause 1106.D) 600 mm dia |
| 11 | Gabian Structure for Retaining Earth:Providing and construction of a gabian structure for retaining earth with segments of wire crates of size 7 m x 3 m x 0.6 m each divided into 1.5 m compartments by cross netting, made from 4 mm galvanised steel wire @ 32 kg per 10 sqm having minimum tensile strength of 300 Mpa conforming to IS:280 and galvanizing coating conforming to IS:4826, woven into mesh with double twist, mesh size not exceeding 100 x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be tied with 4 mm galvanised steel wire as per drawing and MoRT&H Technical specifications clause 2503.3 |
| 12 | Bamboo palasiding:Single bamboo spur and palasiding of whole 2nd class bamboo (Jati or Bethua) 65 mm to 75 mm dia @ 150 mm c/c and closely packed & driven including fitting fixing with half bamboo kamis horizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood as per drawing and technical specification Clause 1302.5.A) Driven at least 900 mm below ground and 1800 mm above ground on average |
| 13 | Gunny Bag:Providing and placing gunny/ polythene (of minimum wall thickness of 500 micron) bags filled with sand (of minmum qty of 0.034 cum) and properly manually stitched to avoid any leakage of sand as per specification. |
| 14 | Seeding and Mulching:Preparation of seed bed on previously laid top soil, furnishing and placing of seeds, fertilizer, mulching material, applying biturate of 0.23 litres per sqm and laying and fixing jute netting, including watering for 3 months all as per MoRT&H Technical Specification clauses of section 300. |
| 15 | Hydraulic Excavator 0.9 / 1.0 cum bucket capacity |
| 16 | Tipper 5.5 cum/10 t |
| 17 | Front end loader Please Enable Macros to View BoQ information |
