|
| 1 | FALSE CEILING REPAIR |
| 2 | Repairing existing grid false ceiling, including careful dismantling and removal of damaged ceiling tiles and grid members, supplying and fixing new matching 600 × 600 mm ceiling tiles, replacing and/or repairing main tees, cross tees, suspension wires and wall angles wherever required, re-levelling, aligning and making the entire grid system true to line and level, refixing and reinstating electrical, fire-fighting and HVAC fixtures disturbed during the work, and disposing of all dismantled materials and debris outside the premises, complete as per the directions of the Engineer-in-Charge. |
| 3 | PARTITION & FINISHING |
| 4 | Providing & Fixing in position Acoustical Panelling made from 12 mm thick plain gypsum panels on aluminium frame of size 50 mm × 20 mm, spaced at 600 × 600 mm c/c, having required aluminium supports from wall of required length, in front of 1000 GSM synthetic wool, 50 mm thick, with chicken mesh on wall side, including cost of required cut-outs, decorative mouldings / finishing items / paint and scaffolding, as per Architectural & Acoustical Design and Instructions, complete in all aspects, including all materials, labour, finishing, etc., complete. |
| 5 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth, complete. |
| 6 | Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours.Scrapping with Emery paper 180 and wipe clean. Applying wall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) |
| 7 | Providing and fixing glass partition using 12 mm thick clear toughened safety glass, conforming to IS: 2553 (Part-1) / relevant IS standards, fixed in position with approved aluminium / stainless steel framing system, including top, bottom and side channels, EPDM / neoprene gaskets, seals, silicon sealant, L-patch fittings, connectors, clamps, necessary brackets, screws, fasteners and all accessories complete.The work shall include cutting, drilling, edge polishing, fixing, alignment and levelling of glass panels, provision of required cut-outs for fittings, proper sealing at joints and edges, and making good the surfaces disturbed during installation, complete in all respects as per architectural drawings, specifications and directions of Engineer-in-Charge. Rate shall include all materials, labour, tools & plants, scaffolding, handling,transportation, fixing and finishing, complete. |
| 8 | FLOOR CARPET |
| 9 | Providing and fixing 2.5 mm thick homogeneous PVC flooring / PVC carpet of approved make and shade, suitable for laboratory use, over a smooth, even and prepared surface, including thorough cleaning of base, application of approved primer and self-leveling compound wherever required, applying approved adhesive as per manufacturer’s specifications, laying the PVC flooring sheets/tiles true to line and level, neatly cutting and finishing edges, making joints smooth and invisible, rolling with heavy roller to ensure proper bonding, and providing skirting of matching PVC flooring up to the required height, complete as per directions of the Engineer-in-Charge |
| 10 | Providing and fixing 12mm toughened glass door with required fixtures and fittings like floor mounted spring, Handles and frosted films matching with existing pattern etc. completed |
| 11 | FURNITURE |
| 12 | Supply of Staff Chair and Visitor chair:Staff Chair : Providing and fixing Motion Mid back office chair with suitable caster wheels, Contact-Tilt Mechanism , Seat Height Adjustable, Adjustable arm rest, Mesh back fabric, lumbar back support. Finish colour –Black. PU foam cushion seat. Note -The chair should be from the same OEM of modular workstation(Make:-Standard) |
| 13 | Modular Linear Workstation of Size 1000(L) X 600(W): Supply and installation of above workstations with minimum 70mm thick 1200 mm high panels at partition Without side Panel. With combination of two separate metal raceways for data and power at bottom, two intermediate fabric blocks, top tile-white board, fabric magnetic. The 35 mm thick Pre-laminated particle board support for top wiring at both sides of workstation shall be provided. The table should be complete with suitable keyboard holder tray. The cut-outs for 6 Module for power (2no’s) and 2 Module (1no's) for network point is to be there. The cable groomer/raceway is to be provided for data routing as well as data cables. The sample/drawing has to be approved by client before delivery. The OEM should be BIFMA Certified. (Refer drawing section) Notes:1) Material of table Top-Worktop should be made of 25mm thick Pre-laminated particle board.2) Material for tiles for top: Fabric magnetic (over GI sheet) plus white board3) Material of bottom tile: Metallic (GI Sheet)4) Plain edge banded with 2mm PVC Tape(Make:-Standard) |
| 14 | Providing Godrej Finness table S026 in size of 1500x750 with ERU 3616 and 3 dr steel pedestal. (GODREJ INTERIO Executive Table of two layer prelaminated particle board (Godrej Product) of IS 12823/Lamin 1500 millimetre 750 millimetre 750 millimetre (GODREJ INTERIO FINNESSE S026 PLAIN TABLE + ERU 3616) 1) Table top: 3 layer 40 mm thick prelaminated particle board (Wod Product) of IS 12823/1st test. 2)Leg Material-NO LEGS 3) Thickness of table top $\pm$2 mm25 millimetre 4) Length of table top $\pm$10 mm1500 millimetre 5) Depth of table $\pm$10 mm750 millimetre 6) Height of table $\pm$10 mm750 millimetre 7) Warranty period in number of years1 8) Product shall be ISO 9001:2015, ISO 14001:2015, ISO18001:2007 certified |
| 15 | Providing and fixing Hi- Back Motion office chair (for HOD Cabin) with suitable caster wheels, Contact-Tilt Mechanism, Seat Height Adjustable, Adjustable armrest, Mesh back fabric, lumbar back support. Finish colour–Black. PU foam cushion seat. The OEM should be BIFMA Certified.(Refer drawing section). |
| 16 | Full Height Storage (Closed Clip-Style Steel Shelving):It features adjustable, heavy-duty shelving units with typically 20-gauge steel shelves and 14-gauge upright posts. The system is designed for easy, tool-free assembly using clip-in connections and supports heavy, evenly distributed loads. Shelf heights can be adjusted in 1-inch or 1.5-inch increments. The shelving has a durable powder-coated finish and includes closed side and back panels.Size: 900 mm (W) × 450 mm (D) × 1800 mm (H), as per approved layout and directions of the Engineer-in-Charge.(Make:-Standard) |
| 17 | Round Table for Meeting Room : Providing, fabricating and fixing round meeting table of approved design and finish, of diameter 48” (1200 mm), manufactured from approved quality board with suitable base/support, complete as per layout, client’s requirement and directions of the Engineer-in-Charge. |
| 18 | Low height Storage: Providing, fabricating and fixing low height storage unit made from approved quality board with shutters/shelves as required, including all hardware and accessories, complete in all respects.Size: 1200 mm (W) × 450 mm (D) × 670 mm (H), as per approved layout and directions of the Engineer-in-Charge. |
| 19 | ELECTRICAL AND ALLIED WORKS |
| 20 | 12Way SPN DB and breakers |
| 21 | Wiring and Switchboard for workstations, meeting room, and TV etc |
| 22 | LIGHTING SYSTEM |
| 23 | Supply and Installation of 2X2 LED Light with all accessories |
| 24 | LED TV |
| 25 | 4K Ultra HD Smart LED TV (55 inch) Contrast Ratio: 16:9 or better Display Type: Ultra HD (4K) HDR : Yes Screen Resolution:3840 x 2160 -Ultra HD or better Screen Size (Diagonal):139 cm - 55 inch No of HDMI Ports: 4 No. of USB Ports : 2 Rated Speaker Output Power (RMS): 20 W Wi Fi : Yes Warranty: 1 Year |
| 26 | MISCELLANEOUS ITEMS |
| 27 | Supply and Installation of roller type Blind(curtain) Please Enable Macros to View BoQ information |
