|
| 1 | Item Code [Highmast Light Maintance-]:Item Type [Electrical] ::All in all comprehensive operation and maintenanceof existing high mast lights(LED/sodium) including watch and ward (Contractor has to keep the lighting system in perfect working condition by repairing/replacement of Main control panel, feeder panel,fuse box, timer, contractor, MCCB, front handle operator switch, MCB, Isolator, Igniter, blast, SPD,driver, bulb, LED, various size cables, CRCA sheetetc. by material given in Bsr-2023. BSR as per direction of Engineer Incharge, Complete Rate. |
| 2 | Item Code [Led Street Light Maintanc]:Item Type [Electrical] ::All in all comprehensive operation and maintenance of existing street/road lights(LED/sodium) including watch and ward (Contractor has to keep the lighting system in perfect working condition by repairing /replacement of Main control panel, feeder panel, fuse box, timer, contractor, MCCB, front handle operator switch, MCB, Isolator, Igniter, blast,SPD, driver, bulb, LED, various size cables, CRCA sheet etc. by material given in BSR-2022.BSR as per direction of Engineer In-charge, Complete Rate. |
| 3 | Item Code [11.2-2022]:Item Type [Electrical] :: Sub Item Code [11.2-2022 + 11.2.4.3]: Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure A attached with this BSR 16.0 Sq. mm 4 Core |
| 4 | Item Code [25.9]:Item Type [Electrical] :: Sub Item Code [25.9 + 25.9.3]: Providing experienced and Highly skilled/skilled/ semi-skilled/Un Skilled labour for electric repair/ maintenance / operation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement (one shift of 8 Hrs per day for 26 Working Days in a month) Semi skilled labour |
| 5 | Item Code [26.74-23]:Item Type [Electrical] :: Sub Item Code [26.74-23 + 26.74.4]: Rewinding of single phase/3phase submersible motor including all necessary material and of the same characteristics as original with required size of super enameled wire E class insulation material and testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. Above 7.5 HP To 10.0 HP |
| 6 | Item Code [26.75-2023]:Item Type [Electrical] :: Sub Item Code [26.75-2023 + 26.75.4]: Repairing of submersible pump of with replacement of broken impellers ,diffuser, bush/bearing set , oil seal complete with testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. Above 7.5 HP To 10.0 HP |
| 7 | Item Code [4.1-2022]:Item Type [Electrical] ::Sub Item Code [4.1-2022 + 4.1.2]: Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 x 1.5 sq.mm Please Enable Macros to View BoQ information |
