|
| 1 | Earth work excavation in hard soil for foundation within initial lead of 50 m and initial lift of 1.5 m including rough dressing and levelling the bed as per the specification approved by the department and transporting 5 km awau from work side as direction of Engg -in- charge. |
| 2 | Filling in foundation with sand well watered & rammed including cost, conveyance, royalty & taxes etc. complete of all materials to work site as the specification approved by the department and direction of Engg-in-charge. |
| 3 | Providing and laying P.C.C. of (1:3:6) with 4 cm size crusher broken hard black granite metal with cost, conveyance, royalties, taxes of all materials, all labour,T&P etc. Complete as per direction of Engineer -in-charge. |
| 4 | Providing and laying R.C.C. work in M-20 grade with 20mm and down grade black hard granite crusher broken stone chips of approved quality from quarry with smooth centering and shuttering hoisting and laying in layers including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. complete With c& s as per direction of the Engineer-in-charge. |
| 5 | Column Footing |
| 6 | Column |
| 7 | Plinth band |
| 8 | Lintel |
| 9 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying |
| 10 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification, including, cutting bending, binding & placing, the steal rods as per drawing technical specifications with cost of binding wire 18 to 20 gauges etc. complete. |
| 11 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance,royalty & taxes etc.compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 12 | Fly ash brick work in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including all cost, conveyance, royalty & taxes etc. compete of all materials to work site as per specification approved by the department & direction of Engg-in-charge. |
| 13 | 12mm thick C:P (1:6) over brick workIncluding all cost conveyance, Royalty & taxes etc. complete of all materials to work site as per specification approved of E.I.C. |
| 14 | Providing16mm thick cement plaster in C. M. (1:6) finished smooth to inside surface including cost conveyance, royalty, taxes of all materials, labour, T&P etc. complete as per direction of the Engineer-in-charge. |
| 15 | 12mm (1/2\\") thick cement plaster (1:4) with cement punning for dado. [Vide AR page-10/6] |
| 16 | Supplying fitting fixing of M.S Grill including cost of material & labour charges etc complete. |
| 17 | Painting two coats with approved Enamel Paint on Steel surface over a coat of Red Oxide Primer |
| 18 | Wall Painting two coats with approved Distemper over a coat of Water Bound Wall cement Primer on Plastered Surfacein |
| 19 | Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface |
| 20 | Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein |
| 21 | Supplying fitting fixing of M.S truss with I section pole including cost of material & labour charges, priming & colour etc complete. |
| 22 | Hoisting trusses and placing in position |
| 23 | Supplying and fixing Colour G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings |
| 24 | Supply of Aluminium coloured Ridge for fixing at middle of roofing etc complete. |
| 25 | Art painting/concept painting/3D paintings over walls/streets (RCC or Plastered or CC or Bituminous base black top surface) as per direction of Engineer- in Charge |
| 26 | Display board Please Enable Macros to View BoQ information |
