|
| 1 | Swaged steel tubular pole ( 410SP-2) of height 7 Mtr. onfirming to IS:2713 (Part II ) in three section with steel base size, bottom of the pole made of 50 mm dia MSB Clamp pipe welded to 300 mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat of read - oxide all complete as required. (Without Arm) |
| 2 | Single arm |
| 3 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size foundation including excavation and reffiling etc. as reqd. |
| 4 | a) Above 6.5 meter and up to 8.0 mtr. |
| 5 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section-3 and shall be complete with all neccssary accessories as required |
| 6 | a) 90w L.E.D. Campus light. |
| 7 | supplying and drawing following sizes of FR PVC insulated copper conductor , single core cable in the existing surface /recessed Steel / PVC conduit as reqd. |
| 8 | a) 3x1.5 sq mm |
| 9 | S/F following way single pole neutral, sheet MCB distribution board, 240 volts on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, Phosphatized and powder painted including earthing etc as reqd. (But without MCB/RCCB/ Isolator) |
| 10 | a) 2 way single door ( For DP Isolator) |
| 11 | supplying and fixing following ratting , double pole ,240 volts , isolator in the exiting MCB DB complete with connections , testing and commissioning etc . as reqd. |
| 12 | a) 63 Amp double pole Isolator |
| 13 | Supplying and laying of XLPE insulated PVC sheathed aluminium armoured cable working voltage upto 1100 volts as per IS: 7098 (Part I) of following sizes. |
| 14 | a) 2 core 10 sq mm (27 Mtr per pole+185 mtr service) |
| 15 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35 sq mm direct in ground including excavation, and refilling the tranch etc as reqd. But excluding sand cushioning and protective covering. |
| 16 | 10 sq mm aluminium lugs |
| 17 | S/F 25 mm dia ISI marked PVC conduit standing of cable from tranch to junction box . |
| 18 | Supplying and fixing Cable junction Box without MCB (Make - Sintex/Hensel or equivelant. |
| 19 | S/F 6 to 32 Amps rating , 240 volts , \\"B\\" series , miniature circuit breaker suitable for lighting and other loads of following pole in the existing MCB DB complete with connections , testing and commissioning etc, as reqd . |
| 20 | Earthing with G.I. earth pipe 4.5 mtr long . 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 21 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required. |
| 22 | S.I.T.C of following rating LED Post top lamp made in die cast aluminium housing with decorative clear/opal serylic diffuser on existing pipe including connection with 1.5sq.mm. copper conductor etc all complete as required. |
| 23 | a) 25W LED Post top lamp clear |
| 24 | CGST@9% |
| 25 | SGST@9% |
| 26 | Add labour cess @1% Please Enable Macros to View BoQ information |
