|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (DSR No.2.8.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR No. 4.1.8) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) (DSR No.4.1.4) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR no. 6.1.1) |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix. (DSR No. 13.7.2) |
| 6 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia nominal bore (DSR No. 18.11.1) |
| 7 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore (DSR No. 18.46.1) |
| 8 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (DSR No. 18.18.1) |
| 9 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR No.18.48) |
| 10 | Providing and fixing PTMT bib cock of approved quality and colour 15 mm normal bore, 122 mm long weighing not less than 99 gms (DSR No.18.54.2) |
| 11 | Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85gms Make: Prayag (DSR No.18.63) |
| 12 | Providing and fixing of S.S. martial wash basin with S.S. brackets , without pillar tapes. Including painting of fittings and brackets, cutting and making good the wails wherever require as per satisfaction of EIC (NSI) |
| 13 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 40 mm dia (DSR No:17.28.2.2) |
| 14 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (19.4)100x100 mm size P type(19.4.1)With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No.19.4.1.1) |
| 15 | Providing and fixing of PVC pipe 3” dia heavy duty for approaching of waste water from stand post upto near by gully trap excluding the cost of excavation and including jointing , , fitting etc. as per satisfaction of EIC. (NSI) |
| 16 | Making connection of PVC waste water pipe with existing nearby G.T. including demolishing , repairing in proper manner as per satisfaction of EIC (NSI) |
| 17 | Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. (DSR No.14.81) |
| 18 | Steel work in built up section/Framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings, frames, guard bar, ladder, railing, brackets, gates and similar work (DSR 10.25.2) Please Enable Macros to View BoQ information |
